- #21 [cooler], 21-06-14 16:40https://www.youtube.com/watch?v=il7-qsIJQlI
- #22 [caslover68], 21-06-14 17:03抱住唔服輸嘅心態, 終於用敲打法將裝飾蓋取出, 記住並不是用扭螺絲方法流出。
但另一個問題又出現了! 整個閥芯柱是被一整條銅柱包圍,並不是如video中僅有一個銅帽固定。 目前無法取出閥心。
可能是20年前的款式根本唔預你換閥芯。
無論如何,多謝大家的教導。 - #23 [cooler], 21-06-14 17:15用士巴拿擰開銅六角鏍帽,便可以取出閥芯。
-
- #24 [caslover68], 21-06-14 18:59多謝#23的意見。
我以前都換過閥芯,一般情況下按你的指示是可行的。
但今次的龍頭比較特別, 固定住閥芯的並非是六角鏍帽這麼簡單,而是一個六角柱(見下圖), 暫時未有工具可以擰開。 - #25 [cooler], 21-06-14 20:44唔一定要用博通才開到,用把好D士巴拿都可以擰開。或者用士德鉗都得。
最後修改時間: 2021-06-14 20:47:23 - #26 [呀金], 21-06-14 21:01大力鉗?
- #27 [CS168], 21-06-14 22:23
- #28 [dennis815], 21-06-14 22:24用六角匙得唔得?
我屋企隻屍嫂又係差唔多,起初用士巴那,大力鉗都唔得,最後用六角匙擰開 - #29 [S.Chan], 21-06-14 23:22.
最後修改時間: 2021-06-14 23:23:52 - #30 [alexanderkoo], 21-06-15 06:38For aged appliance/equipment, there is a term called beyond economical repair. Besides, other parts(especially plastic) would break, too. Don't imagine that repair work involves no resources. Sometimes, even more. (discussion on this forum involved hundreds of hours)
In Industry, when I retrofit high voltage oil breaker by gas breaker to reduce maintenance and enhance safety, I chose the newer equipment as top priority. Just common sense.
DIY is fun but one should draw a line somewhere. - 返回 ...