- #439 [dttmtong], 24-02-22 22:51我無折 ^-0
- #438 [AndyTKO], 24-02-22 22:49Tong兄,如果我冇記錯,好似折後大約6千幾港元。
- #437 [dttmtong], 24-02-22 20:27基本上好似個個都換鋼帶
呢條新款有 micro adjust 可以調半隔,我覺得非常舒服,不過幾貴下 -
- #436 [AndyTKO], 24-02-22 20:26帶扣改用時下流行嘅快速微調扣,鋼水好厚,
- #435 [AndyTKO], 24-02-22 20:24今年新款
- #434 [AndyTKO], 24-02-22 20:22禾老闆一直鍾情於鋼帶,於是乎向AD單買咗一條最新的鋼帶代替原來的尼龍帶,效果即時改觀。
- #433 [bigleung], 24-01-20 10:05https://www.watchart.com/main/prod_in.aspx?mnuid=1041&modid=3&cid=&pcid=&pscid=138&pscid2=&prodid=78607&pg=1
呢到有隻snoopy。在台灣有實體店,可網購,我幫襯過兩次。 - #432 [patkwok], 24-01-20 08:48#417, dttmtong, 等我黎緊去日本留意下D Omega先。
#419,lekin,透底真係好好睇,欣賞機械結構。呢隻moonwatch professional係我target之一。
上Chrono24都見唔少好野,有無人試過係Chrono24買錶?有無伏?
最後修改時間: 2024-01-20 08:49:15 - #431 [lekin], 24-01-19 22:46:Rolex錶殼都好hea
- #430 [0925], 24-01-19 21:15
- #429 [0925], 24-01-19 21:13
- #428 [0925], 24-01-19 21:12
- #427 [0925], 24-01-19 21:08https://deployant.com/inside-the-audemars-piguet-royal-oak-dial-and-case-factory/#A%20Full%20Manufacture
The case manufacture is a rather standard operation of CNC machines whirring away to machine the complex case shapes.
Here we see a closer look at the milling process:
The bezel
The distinctive bezel of Royal Oak is of some interest to us as we perused the factory. The bezel is cut and manufactured by a CNC process rather similar to the one used for cases. It is then given a differential finish alternating between high gloss polish and straight graining. The edges of the octagonal shape of the bezel also needs to retain a well defined edge, and be perfectly aligned to the matching edges on the case body.
最後修改時間: 2024-01-19 21:08:47 - #426 [lekin], 24-01-19 20:34:倒角打磨,就唔界手
平板設計錶殼,雖說文藝復興設計
亦反映當時鍛造水平不足,固不喜 - #425 [dttmtong], 24-01-19 20:00每個人有自己 preference, 咁先係好事嘛,唔會盲目跟風,所以唔使怕得罪嘅
最後修改時間: 2024-01-19 20:01:27 - #424 [dttmtong], 24-01-19 19:57呢個平面錶殼加 sharp cut, 位應該係當年興嘅設計,Omega seamaster 有出、Rolex Oysterquartz, Zenith,Tissot………好多好多牌子都有, 現在 Zenith, Tissot 玩 retro 都有出返。我自己好喜歡呢種錶殼設計,同 moonwatch 個 asymmetrical case 走完全不同風格。現在見到有只 oysterquartz, 不過五萬幾真係唔捨得
AP 錶帶係我擁有手錶造工最好的, 唔會介手架 bo.
最後修改時間: 2024-01-19 19:58:28 - #423 [lekin], 24-01-19 19:46:再得罪講句,呢d平面錶殼接受唔到
紅圈角位,利器 - #422 [dttmtong], 24-01-19 19:25Radiomir 點解要攪成咁我都唔係好清楚,換錶帶係好方便但同時會覺得好化學。我唔知現在有冇改,我十幾年前買過一只,只係用兩粒眼鏡鏍絲咁上下去鎖實。
Panerai 無論香港或者外國都好少見人戴,佢哋係我少數會賣嘅手錶 - #421 [lekin], 24-01-19 19:18:得罪講句,呢d錶耳接受唔到
- #420 [dttmtong], 24-01-19 18:35我覺得 Speedmaster 個三圈佈局係好靚好平衡的,唔會太窄唔會太開
- 下一頁 (1 of 22)
- 返回 ...