- #22 [S.Chan], 21-07-05 11:46試過用 acrylic 開兩個5吋圓形, 裝兩部抽油煙機。
- #23 [alexanderkoo], 21-07-05 12:17I DIY installed a Taiwan Mitsoku(?)inclined range hood, too, using a scrap piece of acrylic sheet.(from Lockhart road)Easy to work with for jigsaw, must be clamped tight to avoid chipping.
- #24 [v.c], 21-07-05 13:27窗門開盡企高見到個窗背。
-
- #25 [敗家仔], 21-07-05 13:46外面既玻璃膠好似車房拆擋風玻璃咁,穿條wire果去拉一圈,搞掂,吾是用劍既
- #26 [呀金], 21-07-05 15:25唔使拆窗,只要拆走向室內的上下左右四條鋁角,因為我做過。
- #27 [learn], 21-07-05 15:26用鐵線界膠不見得會容易些,特別是遇到攝玻璃的黑色硬胶粒,就cake住。
開盡隻窗是會容易摸到和界走"室外"玻璃,但要小心跌件玻璃落街,所以要先界室外,才界室內(起碼室内玻璃線和膠能hold 住件玻璃)。
但之後装完伸手出外唧膠也要有點技術。
最後修改時間: 2021-07-05 15:27:54 - #28 [alexanderkoo], 21-07-07 09:36Will face similar situation, 5" and 6" opening each for mobile AC, cool air and return. Glass is accessible at the back, much easier to take down.
More difficult work was taking down a sliding door for wheel replacement(nylon double wheels), blocked by another portion having a through door refrigerant pipe. Needed to take down both, well supported and removed the lower glass concerned. No c- Fu would do so or simply asking for high cost.
最後修改時間: 2021-07-07 09:37:20 - 返回 ...