- #131 [alexanderkoo], 21-12-28 07:52Back to the topic. It namely refers to OLED TV and US heavy duty washers.(Maytag, Kenmore or similar) One crucial point is short warranty period of appliances in HK.(even for superlative Canon camera, only 1 year warranty)
- #130 [Ryan], 21-12-28 07:10
- #129 [Ryan], 21-12-28 07:10
-
- #128 [Thanatos], 21-12-27 18:44Harrods寄速遞嚟香港運費港幣$300有找五日之內到
最後修改時間: 2021-12-27 18:47:59 - #127 [Pscamera], 21-12-27 17:51用集運, 連埋運費仲平過香港買.
- #126 [Thanatos], 21-12-27 17:10當香港仲係賣緊 $36000 嘅時候,Harrods 仲有大減價 $16000 減到 $13683
最後修改時間: 2021-12-27 17:11:39 - #125 [alexanderkoo], 21-07-02 13:15The best way is to control your desire. I can't see, can't see. 83", better go for a projector, screen 100-120", more economic choice.
- #124 [joeyd], 21-07-02 09:57
真開心, 只售8000美金
- #123 [Drhandguns], 21-07-01 17:11#122 我估你比張全新嘅床褥佢都一樣吸到嘢出嚟... 呢啲魔術師年中揾唔少。 鑽石能量水係一個宗教嚟, 比人爆咗之後不斷輪迴, 換個名响世界各地發揚光大。
- #122 [Thanatos], 21-07-01 16:40我記得當年有啲話給床單床褥嘅吸塵機,會搵專人上門吸你張床
吸完之後成筒水由透明變成墨汁咁黑
我睇完之後真係笑爆嘴,而家諗起都笑唔停
仲有我識得好多醫護界嘅人,真係相信鑽石能量水
飲咗唔知係咪會變V型電磁俠
呢個世界真係好多為大家帶來無窮歡樂嘅趣聞 - #121 [dennis815], 21-07-01 15:30#92 不過margin就一定高,重要無服務,香港租貴,人工都唔平但係好多野都重係labor intensive ,所以成本高
反而我覺得labor intensive 人口密集,有助降低成本
除非你有車,外國要一兩個鐘車程,運輸先送到你府上,師傅先到你屋企修理
個人覺得最主要係香港地產/地產霸權玩晒,租金貴,亦間接令生活費人工貴
供應鏈下游,市場細,大形電器你焗住要幫襯,代理又mark高價 - #120 [joeyd], 21-07-01 15:26仲有當年啲 rainbow 吸塵機,外國7千,香港3萬。
我親身遇過條水魚,一講起佢面都黑晒,哈哈。 - #119 [Thanatos], 21-07-01 15:03外盒全部原廠封條,肯定唔係return貨物
- #118 [Thanatos], 21-07-01 15:01從 Selfridges 買咗返嚟
廿幾公斤速遞運費港幣$260,幾日就送到黎
尋晚玩咗一晚,幾好用
慳返兩萬蚊,爽! - #117 [alexanderkoo], 21-06-28 14:06This year, the prices of TV and washer are reasonable, having lots of choices but not inverter type room cooler, basically a ripped off for equipment which is not long-lasting.
最後修改時間: 2021-06-28 14:06:26 - #116 [alexanderkoo], 21-06-28 06:55#111 Should look at the binomial distribution rather than the extremities. It's irrefutable than brands make in USA or Japan are more reliable than MIC ones, on the average. A renowned dehumidifier imitated to be made in Japan, hence selling point but the compressor(the core) was made in China, should only declare to be assembled in Japan. Besides, the more sophisticated the electronics, the higher the failure rate. Again, failure rate can be estimated by square root of the sum of individual failure squares. If appliance having thousands of components, you can make a guess. Years ago, mfy made appliance last but now what, last shorter , awaiting for new generation. In the States, people on TV claimed that appliances did not live up to spec. for reliability.(less than 10 years) Of course, environmental factor, servicing and utilization would affect their lives in real situation.
Price, overall speaking is lower than that of 3 decades ago, say for TV, considering inflation/buying power. $22,000 for 34" Sony CRT TV and now, you can buy a 65" 4k, less bulky and higher spec.
最後修改時間: 2021-06-28 06:59:11 - #115 [奸人堅], 21-06-28 05:23
有些人貪一世污都沒有判罪,有些人好人都無犯法但死於政棍下,世事無常,但總有例外。
最後修改時間: 2021-06-28 05:24:43 - #114 [沉默的膏蟹], 21-06-27 17:16少啲人買果個牌子維修師傅咪做少啲,某大美國品牌師傅直情同客講咁既價錢啲野係咁上下(係一個用咗幾個月就壞溫控既雪櫃)。
最後修改時間: 2021-06-27 17:16:40 - #113 [christopherchan], 21-06-27 00:12#102 咁我都系例外,我部西門子洗衣機,一日開3次,已經用了5年多。其實膠邊老化速度最大影響系洗衣溫度,洗衣次數反而不是很大的影響因數。避震系統壽命與衣服擺放,濕水衣服重量,脫水速度有最大關係,也不是和洗衣次數掛鉤的。依我和維修師傅的對話經驗,我見的師父大部分也喜愛sabotage,講公司壞話,相信和待遇有關。
- #112 [ich], 21-06-26 12:21#108,#107
香港人都得,熟CAD 嘅更易入手
有乜不規則形狀嘅parts我仔都3D printing 造出來.幾多年前型號都冇所謂 - 下一頁 (1 of 7)
- 返回 ...