- #1 [olivea88], 14-08-08 14:45.
- #2 [254mm], 14-08-08 18:09全波整流, 如電容量足, 會是 AC volts 的 1.414 (square root 2)倍
- #3 [olivea88], 14-08-08 18:54呵呵,應該係橋式全波先 arm,咁先可取最大的電流用,
比2支diode的全波更大電流.. -
- #4 [ben0301], 14-08-09 02:37＞全波整流, 如電容量足, 會是 AC volts 的 1.414 (square root 2)倍
少少修正:
- 無負載下:
輸出電壓 = (Secondary coil AC voltage * 1.414) - (2 * Forward biasing voltage of each diode)
- 當負載電流 = rated output current of transformer:
輸出電壓 = Secondary coil AC voltage - (2 * Forward biasing voltage of each diode) - #5 [olivea88], 14-08-13 12:52試圖2
- #6 [olivea88], 14-08-13 12:54.
- #7 [olivea88], 14-08-13 12:55.
- #8 [olivea88], 14-08-13 12:56.
- #9 [avmark], 14-08-13 13:01個鐵甲人個樣麻麻
- #10 [olivea88], 14-08-13 13:17呢個係今川泰宏畫既漫畫,注重機械人都有人性既表情.
模型呢應該70年代出,90年代又復刻出左一批,所以樣就肥肥等等咁.
但係上錬步行,好過引架.. - #11 [olivea88], 14-08-13 13:30.
- #12 [巨巨人殖裝], 14-08-13 13:43Z
- #13 [巨巨人殖裝], 14-08-13 13:44S
- #14 [nh1124], 14-08-13 14:11......
- #15 [bb430], 14-08-13 14:21
最後修改時間: 2014-08-13 14:22:33 - #16 [cosmos], 14-08-13 14:29I am doing testing too.
Sorry for any inconvenience caused.
- #17 [cosmos], 14-08-13 14:48好明顯,diode接錯了方向
- #18 [olivea88], 14-08-13 16:09只不過有一個A,K寫錯左方向姐.
- #19 [olivea88], 14-08-14 19:32再試圖
- #20 [olivea88], 14-08-14 19:41.
- 下一頁 (1 of 148)
- 返回 ...
試圖....sorry