Lumin D2連接Qnap的nas如何設定？

AI :

You can use a QNAP NAS as a local music storage server for your Lumin D2 Network Music Player by running a UPnP/DLNA media server like MinimServer.

Setting Up Your QNAP NAS with the Lumin D2

• Connect to the Network: Plug both your QNAP NAS and the Lumin D2 into the same local network router or switch via Ethernet cables.

• Install MinimServer: Download and install MinimServer on your QNAP NAS via the QNAP App Center. MinimServer is widely recommended for Lumin streamers because it handles large classical and high-resolution music libraries efficiently and supports OpenHome/UPnP protocols.

• Add Music Files: Transfer your FLAC, WAV, DSD, or MQA audio files into the designated shared music folder on your QNAP NAS.

• Control via Lumin App: Open the official Lumin app on your iOS or Android device. The app will automatically detect MinimServer running on your QNAP NAS, allowing you to browse and play your local files directly through the Lumin D2.

但在我的qnap nas 的app store找不到Minimserver.
請指教如何操作下載Miniserver.

但在我的qnap nas 的app center找不到Minimserver.
請指教如何操作下載Miniserver.

但在我的qnap nas 的app center找不到Minimserver.
請指教如何操作下載minimserver.

自己試下AI啦，吾係好快被淘汰㗎啦。

AI :

You can manually download and install MinimServer on your QNAP NAS by getting the package directly from the MinimServer Downloads Page and using the manual install feature in the QNAP App Center.
MinimServer may not show up in your on-device App Center because it is a third-party application or because your specific QNAP NAS model and CPU architecture are not indexed in the official searchable catalog for that package.

How to Install MinimServer Manually

1. Download the QPKG file: Go to the MinimServer Downloads Page on your computer and download the appropriate QNAP package (.qpkg) for your processor architecture (such as ARM or Intel/AMD).

2. Enable Unsigned Apps:
• Open your QNAP NAS web interface and open the App Center.
• Click the Settings (gear/cog icon) in the top right.
• Under the General tab, check the option to allow the installation of applications without a valid digital signature (non-QNAP Store apps).

3. Install Manually:
• Click the Manual Install button (often represented by a small plus or manual install icon near the top right of the App Center window).
• Browse and select the .qpkg file you downloaded from MinimServer.
• Click Install and accept any security warnings regarding third-party packages.

Lumin 連接QNAP可以用內置DLNA Media Server，不個人覺得效果唔理想，主要係Lumin個app連線入去版面更新比較慢。你亦可以用miniserver，只係QNAP個版本唔係全功能，要用晒所有功能仲要俾年費！
過往我係用QNAP Kazoo Server，但係近期連線有問題已經冇再用。而家轉咗用一部舊電腦行Daphile，打開Daphile嘅Upnp功能就變成一部music server，功能好過miniserver，而且除咗Music Server之外仲可以直接作為streamer，只要接一部有USB input嘅DAC就即刻有得玩，而且音質係出咗名靚！

其實小弟的Lumin D2用Lumin app配合Qnap Nas作為音樂庫多年，一直使用都好方便覺得可靠，不知何解前幾天开始，Lumin app認唔到這兩台Qnap nas，其他牌子nas依舊用Lumin app跟以往一樣操作正常。不知其他師兄有同樣經歷。

補充：在Mac上是見到Qnap nas及查看相關音樂檔案。

既然之前用開好好地，不如試下重啟成個網絡再派過D IP。

試過了，reset router, nas, 重裝apps，有時見到暗影的nas名稱（註明：已離綫）

咁其他同一network 既device連唔連到Qnap？

我有2台qnap nas, 1台synology nas, 兩台streaming player: lumin同auralic.
lumin讀到synology nas唔使ID 同 PW, 讀唔到兩個qnap nas
auralic讀到3個nas要入ID同PW

近期在iMac做過較明顯的操作是upgrade to Golden gate 27.01 同安裝咗Rosetta。問過AI,這兩操作對 Lumin聽歌應無影響。

利申：我冇 lumin 亦冇 imac。 純粹只係問AI。

AI:
The inability to access your QNAP music library via the LUMIN App after upgrading to macOS 27 Golden Gate is likely caused by major underlying network protocol and security changes introduced in Apple's latest operating system release.

The primary culprits are Apple's complete removal of AFP (Apple Filing Protocol) and tightened Local Network privacy permissions. Use the following troubleshooting steps to restore your connection:

1. Shift Entirely from AFP to SMB
macOS 27 Golden Gate completely dropped legacy AFP support. If the LUMIN App or your media server (such as MinimServer or QNAP's Multimedia Console) was relying on AFP pathways or an AFP-mounted volume to read the directory, it will fail entirely.
• Log into your QNAP QTS/QuTS hero dashboard.
• Go to Control Panel ＞ Network & File Services ＞ Win/Mac/NFS/WebDAV ＞ Microsoft Networking.
• Ensure SMB Service is enabled.
• Set the Highest SMB version to SMB 3 (or at least SMB 2.1) to meet macOS 27's updated security baseline.
• Disconnect any old network shares on your Mac and reconnect them using smb://[your-nas-ip-or-name] instead of afp://.

2. Verify Local Network & Full Disk Permissions
macOS 27 introduces stricter state management for application network and disk isolation. If you are running the LUMIN app directly on your Mac, or running a Mac-based server endpoint, it may be blocked from scanning the local subnet.
• On your Mac, go to System Settings ＞ Privacy & Security.
• Click on Local Network and ensure that the LUMIN App (and any associated music server tools like MinimServer) toggle is switched ON.
• Go back to Privacy & Security, click on Full Disk Access, and verify that your media controllers are granted access if they manage local caches or folder linking.
• Tip: Toggle these permissions off and back on again to force macOS to refresh its security database.

3. Rebuild or Restart Your NAS Media Server
Major OS updates can disrupt active UPnP/DLNA broadcast states between your network devices.
• If you use MinimServer (highly recommended by LUMIN): Open the MinimServer configuration page via your QNAP App Center and click Restart.
• If you use QNAP's native media server: Go to Multimedia Console ＞ Media Library and select Rebuild media library indexing or Re-index to clear out dead file paths left over from pre-upgrade sessions.
4. Clear the LUMIN App Cache
Once the network layers are fixed, the app itself needs to refresh its index.
• Open the LUMIN App.
• Navigate to Settings ＞ LUMIN L2 / Player Settings ＞ Library Options.
• Tap Reload Music Library to wipe the local cache and force a clean download of the updated SMB/UPnP network paths.

I have Lumin Mini U2. No problem to connect to QNAP NAS!