- #20 [Ming Sir], 23-07-18 20:48
- #19 [DeepSea^^], 23-07-18 20:47PA279CV 出名很多先天問題,去電腦討論區有一大班苦主,被列為仇人推介恩物。
- #18 [alliance0621], 23-07-18 19:05Once again, Asus products in general are just a piece of shit, I will never buy their products except computer mother board which I am almost no chance to hook up this myself.
Throw it and get the Dell U4919DW and costed me HK$10,300. -
- #17 [Ivan913], 23-07-18 18:15#15
I don't want to use display port on this ASUS monitor because it is 1.4 version DP only, It don’ t support HDR. I use this monitor to watch Netflix in late evening and I need HDR, huge difference after turn on HRD on my Window. So I only choose HDMI on my monitor.
My 10 years old LG monitor don't have this problem. Luckily I still have this old monitor now. Otherwise I don't have monitor to use when ASUS sent it to repair. - #16 [lym], 23-07-18 18:03#13
點解仲要用頂盒插落去試咁麻煩, 已經試過用隻10年機齢 LG芒試, 完全冇問題.
##################
無。。。諗住試下無壞姐。可能自己有玩黑膠,比唱頭/MC牛玩得多。接線完全無吾同擺舊野係呢度同個度有時D hum 可以爭好遠。所以可以吾使理我。
最後修改時間: 2023-07-18 18:08:47 - #15 [alexanderkoo], 23-07-18 17:44Would mean display port. Available from some display cards.
Wife has been using display port since it's more tight gripping than hdmi.
Since it has been repaired and tested in Asus, it may be related to resolution setting in pc and frequency. My projector has such warning before changing to higher resolution.
最後修改時間: 2023-07-18 17:59:30 - #14 [Ivan913], 23-07-18 17:31#11
直接換過隻....?? 今年全新5月尾入手, 牙石唔肯換, 話只能整, 以後唁唔會考慮ASUS 芒
#12
如果係 Windows 問題, 為何我隻舊LG芒冇問題 ? 已經update 左Monitor driver 同 Display card driver
#13
點解仲要用頂盒插落去試咁麻煩, 已經試過用隻10年機齢 LG芒試, 完全冇問題.
網上search 到外國都有用家有類似問題 (而且係同一型號: PA279CV):
https://www.reddit.com/r/Monitors/comments/uc12j9/asus_proart_pa279cv_occasionally_does_not_detect/ - #13 [lym], 23-07-18 16:58有機頂盒個D可插落去試下。
- #12 [Kenny], 23-07-18 16:52可能係Windows update 問題。
我都有同一樣問題。電腦著咗之後,Mon 話 no signal,但係 mouse keyboard 著,SSD 閃咗幾吓。其實根本Windows 冇 boot 到機。後來先至發現問題多數發生係Windows update 之後。Anyway 我解決方法:
1. 冇熄機成個幾星期,比Windows 自己修復。
2. 每次有問題就 Uninstall 最近個 windows update。佢會自動自覺下星期再update 過。再 Install 多數冇事。
So far so good。如果我啲方法唔得,再搵吓 clues 再 google 睇吓係乜嘢 Windows 問題。Both PC 同 Mon 供應商唔會啋你。要自己解決。
PS: 冇事嘅。PC no sleep mode 同 Mon set energy saving mode + 唔熄機 = 冇問題。
最後修改時間: 2023-07-18 17:02:18 - #11 [411], 23-07-18 16:09Mon 最基本要入到BIOS....
如果INPUT 正確....無SIGNAL 多數Mon 壞...直接換過隻應該無事.~
你話板壞定POWER 壞....關你鬼事...隻MON 先2~3個月.~~ - #10 [G1], 23-07-18 16:04I will avoid ASUS products by all means except few kinds of product: MB, display card, router, some of their product teams are very shitty….
- #9 [Ivan913], 23-07-18 14:42#8
牙石已經換左隻芒裏面塊缐路板, 但問題冇解決
PS: 牙石芒應該係用Synnex 聯強國際做維修, 張維修單係Synnex.
#7
隻芒輸入設定可以選 HDMI 1, HDMI 2, Display Port, USB-Type C 同自動偵測. 我已經選左HDMI-1 (如果插 HDMI-1 port) 一 樣detect 唔到. 選 HDMI-2 (如果插 HDMI-1 port) 情況亦一 樣, 顯示 HDMI-2 no signal.
- #8 [olivea88], 23-07-18 14:06可能係軟件壞左..要換主板...
- #7 [bt99], 23-07-18 14:01有無試過 ...
入隻芒設定,揀選 HDMI 輸入,剔除其餘選入選項,
如果有 "自動掃描" 輸入,就停咗佢,
迫佢每次開機唔做 auto scan 呢個動作。。
同埋,試下先開電腦,一兩分鐘後先開芒 - #6 [Ivan913], 23-07-18 13:29#4
隻芒5月尾全新入手, 幫牙石修理間公司話唔知點解,可能power 有問題,試吓換power parts
#5
display card 只有一個HDMI output port, 但舊芒冇問題 - #5 [alexanderkoo], 23-07-18 13:23Can't tell too much. But there is selection of display card or integral AIO display of MB, in BIOS.
- #4 [411], 23-07-18 13:18部電腦新唔新,如果較新,9X9隻MON 壞~~~
- #3 [Ivan913], 23-07-18 12:42#2
已經試過幾條唔同嘅HDMI 線,又插過唔同HDMI port 結果都係一樣,用舊芒試完全冇問題 - #2 [cornercube], 23-07-18 12:01
- #1 [Ivan913], 23-07-18 11:35五月買咗牙石嘅4K 27 吋芒,但用咗唔夠一個星期就有問題,開電腦時隻芒經常接收唔到HDMI 訊號 (見附圖),然後轉黃燈待機狀態,有時什至一著機唔夠幾秒鐘就自動熄機,要熄芒過 5-10秒再開至入到畫面 ,好多時候要重覆呢個動幾次,又或者等1-2 分鐘至入到畫面,如果入到畫面(Windows) 後就好穩定,唔會接收唔到HDMI 訊號,更唔會自動熄機,就算去食飯,熄咗個芒一個鐘再著芒都冇問題 (電腦係著緊既)。
試過用唔同HDMI cable, 插唔到 HDMI port (包括芒同 display card ) , 什至用隻10年既24吋 LG 舊芒都冇問題,2星期前個芒生產商拿返去維修,換咗線路板,但拿返來問題依然存在,聯絡牙石、佢哋負責維修保養公司話唔知點解,但可能power 有問題,要換零件,但冇現貨要訂。
請問係咪隻芒個power 有問題?關唔關Windows setting 事?但隻10年LG 芒都冇問題d問題,冇理新芒要等分幾2分鐘至入到畫面⋯⋯⋯ - 返回 ...
又有另一條線,插入 B,C,D,E ,F 機都 唔 work ,但用喺 A機就 perfect…… !
所以咩都試吓真係無壞,當然,試唔試樓主可自行決定!
講到機頂盒,我試過以為佢壞,換過晒 HDMI, 電視天線, Lan 線, 都唔得,換埋喺房正常用緊,同一型號機頂盒隻火牛出嚟試,都係唔得,諗住放棄,預備抆線,機頂盒有駁 external harddisk, 順手將 harddisk case 隻火牛抆線,手痕駁去機頂盒試吓,一切回復正常,結果用到而家,原本俾電機頂盒隻牛駁去 harddisk case 佢又正常喎,真係莫名其妙!所以樓主不妨電源線、乜嘢線都試吓,試咗唔得唔好打頭!
試定唔試?唔怕煩先好試!
最後修改時間: 2023-07-18 20:52:52