靚仔但透明底...

4R26
100M
如果under2,000才入手

I keep telling my colleagues that I am only 15 even though I said that some 30 years ago.

Young at heart!

You are right I am not old at all. If the HK Government official is right that 120 is the new 60 then I am only in my 30's. ^_^

壽墨? You mean my freckles? I have these since I was a child.





最後修改時間: 2019-08-14 01:50:10

如果 6 字頭唔算好老。

0925 Brother,

You are really observant and is it due to the fact that elite watchmaker is always having an eagle eye with the finest details?

BTW, I am not kidding.

Yeah, I will be retired less than a year soon.

fotheringay兄前臂有壽墨，冇乜毛，年紀唔輕哦！

同我大哥比我隻70年代尾隻Seiko Diver比比。

隻吞拿魚相信是我到現今最大隻的手表。

我通常不喜歡大表，當年送走隻Deep Sea除了因表面週边有Rolex慨logo外，第二個原因就是比我隻傳統size概sea-dweller及sub大了很多。

但估唔到隻吞拿魚雖有成51mm但又唔覺太誇。

https://www.tapatalk.com/groups/seikoholics/inside-seiko-s-sbdx001-marinemaster-300-meter-dive-t152.html

日本仔好固執，唔明佢點解潛水錶用一個gasket仲要放呢個位置，D 2, 3仟蚊錶全部唔用sapphire crystal，生產成本祇係俾多2~3蚊美金。

OK, I hate to say this, but this crown is anemic. This is no better crown then you will find on a Sumo or even a monster. Its only using one gasket, appears to be the same gasket used on the SKX!! Really sad about this. I would have thought Seiko would use at least two or three gaskets in this, but there is only the one! One stinking gasket!! No back up, its not even large by any stretch of the word. Ohh well. Lets put a trip lock on it! LOLLOLOLOL.

kennycwc兄我唔係心水清，係八卦。



如果想偷雞用一個gasket又想防水度高，要將gasket套落條stem底放 "把的" 的內圈，上緊 "把的" 時壓實 crown tube 成密封套帽，當然D螺絲牙, 配套五金件質量和尺寸要搞 "好" D。


最後修改時間: 2019-08-10 18:59:01

#1313 0925兄 心水咁清嘅！

#1314 fotheringay兄,
唔緊要啦，轉名當出新款囉！

Sekio new 007

Yes.

It is a long story. Banned three times by Jackie due to political reasons in the past.



最後修改時間: 2019-08-10 18:37:42

fotheringay = chinaimamn ？

It's been 10 years since my first post here.

I have a few more addition but nothing extravagant just nice Seiko.





最後修改時間: 2019-08-10 16:58:11

全新 PROSPEX SRPD45K1專業潛水錶現已於指定地區 SEIKO 專門店正式發售，定價為 $4,180 港元。

#1308 隻錶帶咗兩年，咁應該點？＜

同合資格(起馬要有watch-winder 和 timegrapher 度錶的)的修錶師講，檢查是#1304 的(1)或(2)，再製訂維修方款。

如果你新買時吾係咁，可能笠左油哩？我隻東方正常番工咁戴吾會停，係週末吾戴至會停。

咁就係自動錶既運作原理，但如果好似我咁每日帶12個鐘都唔夠，咁應該點？

隻錶帶咗兩年。

#1304 + 2
像上鏈公仔，barrel spring上鏈，動力反方向釋放，escape wheel, pallet fork 和 balance wheel 組成 regulator，穩定控制動力釋放。

最後修改時間: 2019-06-15 02:08:53

唔知隻錶要上鏈 …＜

所有有發條(barrel spring)的機械錶(manual winding & automatic)都要上鏈
#1304 + 1

最後修改時間: 2019-06-14 23:51:42

唔該師兄

不過我真係唔知隻錶要上鏈 …