- #21 [kingphilip], 23-10-08 21:42剛剛又問完ebay 答案又系吾同,不確定性,真系多到吾知點訂
- #22 [sj4000], 23-10-08 21:52其實有啲賣家只懂賣東西不懂維修及技術支援,所以找啲懂技術支援嘅賣家較穩陣,其實從言談中可得知,如淘寶幾十蚊可買到一個光頭組總成,亦不防搏一搏,就算買錯都係幾十蚊人仔,就當買個維修經驗買個店家誠信。
最後修改時間: 2023-10-08 21:59:38 - #23 [kingphilip], 23-10-08 22:0122# 所以而家我嘅策略系四圍咁打聽詢問,然後再作决定
最後修改時間: 2023-10-08 22:10:37 -
- #24 [kingphilip], 23-10-08 22:2222# 如果我能了解換頭過程,或者同淘返黎自己換,本來都冇問題,不過就系自己吾了解,換呢個頭是否須要調較?如果要調就真系得物無所用,所以希望訂到連機械架,衹做plug &play,但似乎現實又吾系咁,網上賣家好多show張成份頭連機架相黎賣,到你問系咪成set賣架,佢就先答你衹系賣個頭,一個吾小心就中招
- #25 [sj4000], 23-10-08 22:54#24
所以我講的這間,我早前都有幫襯過買光頭,收到的三洋光頭總成和刊登圖片是一致的。 - #26 [kingphilip], 23-10-08 23:3725#
你講嘅系邊家?定益系話咁啱,就系我貼張相果家,佢都系幾十文咋,講明系折機 - #27 [sj4000], 23-10-09 00:30我在#20提供的那間有店名和連結。
哦!原來樓主你都問過這間,你可睇睇店名是不是叫 : 激光头配件店。
最後修改時間: 2023-10-09 00:35:17 - #28 [audiofans], 23-10-09 02:49#15
另一粒pcm1704及pmd200在線路板底下面! - #29 [kingphilip], 23-10-09 16:05#27
有一點攪吾明,VAM1202衹系光頭型號?定系連機械架?機架是否又有分機種,因為淘仔其中有一間系賣1202,當我比我部機CD5XS型號問佢後,佢就答我話我部機用吾到,因為架不對!
最後修改時間: 2023-10-09 16:06:13 - #30 [rcywong], 23-10-09 16:11The correct type is Philips VAM1202 CD Mechanism. It is a complete CD modual for your CD player.
最後修改時間: 2023-10-09 16:14:29 - #31 [kingphilip], 23-10-09 16:29Thx rcywong ching
Because this model has been discontinued, there are mixed results on the Internet, which is quite confusing. I also asked 威達and the answer was that more than a year ago, the original factory no longer provided them with new laser heads. - #32 [audiofans], 23-10-09 16:36Naim既cd機如果摩打冇事剩換光頭會比較簡單,因為Naim個機架唔根正常Phillips規格的,佢既摩打係要銲線落伺服板,外面買正規既Philips vam機架係有插頭插落伺服板唔洗銲線的!即係你買機架既話係需要銲線做一點改裝先可以成個機芯連摩打一齊換!
- #33 [高原], 23-10-09 16:56實物已在旁不妨查看一下,機芯後面或側面有型號標示,
不過淘記貨要有心理準備 - #34 [kingphilip], 23-10-09 21:15吾該Audiofans同高原兩位ching
要焊綫冇問題,最怕要調頭同碟佢離,因為未換過所以長氣啲問 - #35 [kingphilip], 23-10-09 21:23咁呢兩款,一款有綫一款無綫,其實系咪吾駛理,到時換好新頭,就系跟返部機原本焊返啲綫就可以?
- #36 [sj4000], 23-10-09 22:08#35
我會搏上圖有線這個,有機會係照拆照裝就可以。
之前我的Rega頂揭式cd機用三洋光頭總成,打開機蓋一拔一插就攪掂。 - #37 [kingphilip], 23-10-09 22:46#36
已經淘咗有綫果款,等貨! - #38 [audiofans], 23-10-09 23:37買冇線會好做d!
- #39 [kingphilip], 23-10-10 00:53Audiofans吾該曬!
好多謝呢張相,幾乎所有不清柝難題都解决曬,就等套頭返!
最後修改時間: 2023-10-10 00:54:14 - #40 [sj4000], 23-10-10 01:30#37
樓主攪掂記得再係度分享吓。
我之前幫襯這間店買光頭時,問過店家如攪唔掂可否提供技術支援佢話可以。
還有上次店家提醒如要焊接光頭位置要用防靜電辣雞免得靜電弄壞光頭。
最後修改時間: 2023-10-10 01:43:24 - 下一頁 (2 of 4)
- 返回 ...