- #8 [Yourcousin], 20-08-05 22:48
- #7 [hifidy], 20-08-01 23:57插住電就開始burn in了。我估開著個source會快少少
- #6 [Yourcousin], 20-08-01 13:20師兄,
開著系統,播歌 Burn-in 400 小時,係幾困難的。你係點 Burn-in? (可否斬開,如,1日10小時?)
如果Power amp 冇用 MC-1/MC-0.5, 只開source/preamp, 唔開poweramp, 得唔得? -
- #5 [hifidy], 20-07-26 22:38其實放插係邊度都有impact. 不過理論上近source (preamp)會比較敏感。 另外我問過Rick, 越近上游越有效果 (例如入牆位)。慢慢試先好玩。
- #4 [Yourcousin], 20-07-26 20:47師兄
看過外地文章,現打買 2個 MC-1 pro.
現有3條power line 分配到 (1)source,(2) preamp, (3) poweramp
MC-1 會放在 source 及 preamp.
以你經驗,加多個在Poweramp 那邊,有冇大作用? - #3 [hifidy], 20-07-24 23:29MC-1 用家。效果絕對明顯。特別係3D音場同細節方面。建議先買一粒(MC0.5 普通版)先試試
- #2 [Yourcousin], 20-06-25 09:13有冇師兄分享經驗? 係唔係蛇油?
- #1 [Yourcousin], 20-06-13 21:28有冇師兄用 high fidelity cables MC-0.5 或 MC-0.5 Helix plus?
係唔係 Snake oil? - 返回 ...
Q1: Is it really necessary to turn-on the machines, and to play the music for burn-in? Or if you play the music, you need 400 hr, otherwise if you only get MC-0.5/MC-1 connected, you need much much longer time, say thousand hrs, to burn-in?
Ans: (Rick) You cannot run it with devices off and expect break-in. They do have to be powered on and playing music even at low levels but without music you do not have an adjustment in the components to the new A/C signal.
Q2: Assuming I will play the music for burn-in,
(Q2.1) my Power Amp does not have MC-0.5/MC-1 connected, do I need to turn-on Power Amp? (If power amp is not on, the speaker will be quiet and people can sleep…I can keep playing the CDP/Pre….)
Ans: (Rick) Yes it must turn-on, and adjust as well.
(Q2.2) Can I burn-in, say, 10 hours in a day, and turn-off remaining 14 hours??
Ans: (Rick) Sure it will take longer but you can do that.
(Rick) We're discussing "total break-in". The system are sure to sound great long before they fully settle.