- #1461 [Baku], 22-12-30 10:12請問D2支援幾多GB硬碟。我用1T有時得有時找不到。
- #1460 [wklie], 22-12-27 22:05#1458:
https://www.luminmusic.com/purchase.html
Please scroll down to "Hong Kong".
I thought you were interested in U2 Mini connection to Marantz SA-10 before?
Although you could use a D2 with BNC to RCA coaxial cable to an external DAC, U2 Mini / U1 Mini are better as a network transport.
最後修改時間: 2022-12-27 22:13:11 - #1459 [wklie], 22-12-27 22:04#1457:
M1 is a streamer + DAC + integrated amplifier (60W @ 8 ohm) with speaker output.
P1 / T3 / D2 is a streamer + DAC with analog XLR or RCA output to an amplifier.
P1 / T3 also supports USB output to an external DAC (analog output will be disabled).
P1 also supports analog / digital inputs (from a CD transport or TV).
最後修改時間: 2022-12-27 22:13:52 -
- #1458 [173], 22-12-27 12:49想問下旺角邊度有得買Lumin D2?謝
- #1457 [Everything@1328], 22-12-26 19:08請教:想買部平價streamer玩下,m1 or d2好?
兩機有什麼大分別?是否一定要加牛才好聲?多謝! - #1456 [Baku], 22-12-15 21:00明白了。謝謝各位解答
- #1455 [wklie], 22-12-15 21:00#1453: None of the current Lumin products support external clock input.
- #1454 [csachan], 22-12-15 14:24用Uptone Etheregen switch,前置用開Lumin U1。參考討論:
https://www.audioshark.org/lumin-169/etherregen-network-switch-20299.html - #1453 [Baku], 22-12-15 12:52有人話加鐘可以好聲好多。請問D2可以加嗎?
- #1452 [wklie], 22-12-13 14:34Lumin app iOS minimum requirement will be changed to iOS 11.
This is caused by Apple no longer supports building of 32 bit app with the latest Apple XCode development tool. At the same time, we cannot keep using a last generation XCode as it causes problems for us with newer iOS. If you can run iOS 11 or later, it implies the Apple SoC in your iOS device is 64 bit.
Only iPad / iPhone released after Fall 2013 with 64-bit A7 SoC or newer can be used. That means the oldest devices can run Lumin app are: iPad 5, iPad Mini 2, iPad Air 1, iPhone 5S, iPod Touch 6. - #1451 [jimmyihv], 22-12-10 17:37Thanks wklie
Updated to 15.2 and running in #ROONONLY mode.
The machine sounds terrific. - #1450 [wklie], 22-12-09 10:23Firmware 15.2 for all 13 Lumin network player / transport models launched in the past 10 years have been released. This is the 10th year anniversary firmware update for our original model A1 launched in December 2012.
https://www.luminmusic.com/firmware-notes.html
最後修改時間: 2022-12-09 10:24:56 - #1449 [wklie], 22-12-05 15:16#1448:
Sorry for late reply.
Please observe whether you see a "Network Error" displayed on front panel.
If you're using a third party LPS, please restore the original power supply.
If you're using USB output to DAC, please try coax instead.
If you are already using coax with original Lumin internal power supply, please take the unit to our office for free checking, together with the purchase invoice. Please note that the unit must have original parts (especially power supply) inside and intact. - #1448 [LingCH], 22-11-24 17:53hello wklie
我想請問一下
我部U1 Mini 經常播播下歌幾秒至分幾鐘內
會自己停咗唔播
無論經uPnP播Server嘅歌和Tidal 都係一樣
想請問會是甚麼問題呢? - #1447 [wklie], 22-11-20 16:44For Esoteric I/F firmware update, please ask 大昌 / Esoteric for advice.
- #1446 [wing1238], 22-11-20 11:53Hi wklie
I try to update esoteric n03T firmware,
But the driver: win_DFU_driver do not support win10.
Is it possible you can reflect this and demand a new driver support file?
Thank you - #1445 [wklie], 22-11-16 11:20Lumin P1 review:
https://www.audionet.com.tw/thread-15470-1-1.html - #1444 [wklie], 22-11-02 21:53#1442: To the best of my knowledge I don't think this ever happened before in the whole 10 years of Lumin history
#1443: Modern DSP speakers require only one digital connection to one master speaker, then it uses another cable from the master speaker to the other speaker - this is true for the Dutch & Dutch 8C, Kii Three, KEF LS50W (wired mode), or even Bang & Olufsen. If you are sure your speakers are not meant to be connected like that, please consult your speaker manufacturer or ask other users - I'm sure many people using the same type of speakers would have the same question. The manufacturer will certainly know the answer.
最後修改時間: 2022-11-02 22:06:26 - #1443 [com-buddy], 22-11-02 20:49#1435 : I found that the Leedh volume works as you mentioned. Thanks for the advice.
However, I run into another problem. There is only only one digital output (BNC) on D2 but I need to split the signal as I have two speakers which need the digital (PCM) signal for left/right. What is the best way to do it? - #1442 [jeffreylam98], 22-11-02 14:34Dear Wilkie (Post 1438)
own a U1 with X1 PSU
I leave the X1 PSU on and hv the U1 in sleep mode
I know having it always on would make it sonically better
Will the filter capacitors deteriorate very fast ?
Since the button is at the back and it is very trouble for me to turn it off every time
Regards
Jeffrey - 下一頁 (2 of 74)
- 返回 ...