- #41 [thomasc2], 09-12-28 10:53
- #42 [cokecokecoke], 09-12-28 10:53thomasc2兄,
我有無趣換座,因眼見原裝真係差得制 - #43 [thomasc2], 09-12-28 21:08cokecokecoke
索性用實物當面同你講,有興趣就pm我。 -
- #44 [cokecokecoke], 10-01-01 02:12Happy New Year ....all yamaha fans
- #45 [cokecokecoke], 10-01-07 16:19現在用胆前石後推佢真係好正
- #46 [chris66], 10-01-07 21:40yamaha NS-1000X
- #47 [chris66], 10-01-07 21:41yamaha NS-1000X
- #48 [cokecokecoke], 10-01-07 23:58chris66 hing,
very nice 1000X wor......what you drive the 1000X? - #49 [Vash], 10-01-08 00:42Seems Chris is using Airtight tube amp..
^__^ - #50 [cokecokecoke], 10-01-08 01:15Vash,
I just enjoy your goldmund - #51 [Vash], 10-01-08 01:17cokecokecoke,
Don't expect too much on it. It is just so so....
^__~ - #52 [I_Love_70s], 10-01-08 09:50I have try to use Sansui AU-9500 to drive NS-1000M the sound is harsh and not my favored sound. But I never try to use tube amp to drive it, it is worth to try, many brothers say tube amp is a good match with NS-1000M.
- #53 [chris66], 10-01-08 10:17This tube Amp is AM201 with 25W X 2 class A with EL84 x 8nos.(Not Air-tight but his little sister Accousitc Masterprice licensed China made Product)
- #54 [thomasc2], 10-01-08 20:35這種舊式闊面設計,要做到隱形效果和pin point 的定位是比新款窄身的喇叭困難,一直都無仔細去聽呢對1000M, 一心想著遲些(不知遲到幾時)替它們另做一對座地音箱,並將高、中音單元拿出來。最近被各位挑起條筋,較認真的聽了一陣,再次想起這個念頭。和朋友講起,知到原來日本早已有人咁做,不過是採用較簡單的方法,就是沿用舊的音箱,並來個倒頭樁。知道日本仔試過話得,忍不住立即開功。
個架用一寸MDF板,街邊執的。 - #55 [thomasc2], 10-01-08 20:38倒頭樁NS-1000M的雄姿。
- #56 [thomasc2], 10-01-08 20:51幾日功夫完全值得,效果比我想象還要好。中高音比靠邊站的Watt仔明顯高出一班,鋼琴,小提琴和人聲都晶瑩通透,相當好聽,低音量足,但是是我不喜歡的肥腫形,無法子,一個普通紙盤12"係咁上下,如果有人可以為它設計過一個用更優質單體的低音部份(最好是用兩個10" instead of 一個12"),這喇叭肯定會更上一層樓。
- #57 [thomasc2], 10-01-08 20:59請大家順便望望個木箱內部,一寸多厚的MDF,加大量橫直支撐,背脊還要貼一個寸幾厚的"針板",掉左佢的確有點浪費。
- #58 [thomasc2], 10-01-08 21:05還未想到如何包住中音個pet pet. 腳低朝天,D花痕都要執執。
- #59 [chrisham], 10-01-08 23:10NS1000 ok ma?
- #60 [cokecokecoke], 10-01-08 23:27thomasc2,
you are super...............i really want to listen your NS-1000M - 下一頁 (3 of 15)
- 返回 ...
這eBay的描述有點不實,問題是speaker terminal的電木板和分音器的膠模是灌有大量萬能膠黏合的(Post 10 張相中間黃色的就是),是不能簡單的 "remove the original two screws and pull off the old speaker terminal plate". 最少都要把分音器的上層拆開,才可把萬能膠清除,再拆除舊terminal board.