- #23 [alexanderkoo], 21-04-22 08:39
- #22 [hahayanyan], 21-04-21 10:06應該開一條新post.... For trouble shooting fun.... Haha
Fun.... I am troubleshooting a teac reel to reel... It work so lovely But at the end of the reel... It 會令到間屋跳制
最後修改時間: 2021-04-21 10:06:15 - #21 [hokman], 21-04-20 08:03我都成日無幫襯,
但梁師父都肯教我好多野,
有師父風格,
值得推介。 -
- #20 [karkar], 21-04-19 21:54有次想搵佢整cd機, 雖然最後冇幫襯到, 不過比左好多有用資料同解釋我, 支持
- #19 [邱邱邱邱], 21-04-19 18:28羅師父不是江湖術仕,是真正有料的師父.×2
- #18 [009terry], 21-04-19 17:26X2 的確值得支持!
- #17 [fai010203], 21-04-19 15:09支持梁師父!
- #16 [andysansui8899], 21-04-19 14:09羅師父不是江湖術仕,是真正有料的師父.
- #15 [kingphilip], 21-04-19 00:29羅密歐C傅亦曾經系呢度免費指導小弟整返好幾樣器材,真系要再次多謝佢
- #14 [hahayanyan], 21-04-18 01:29haha fix my sony r2r la..haha
- #13 [羅密歐], 21-04-17 17:06各位師兄謬贊了!
在汗顏中.... - #12 [一縷輕煙], 21-04-17 16:14我5識羅c傅,但見通常有佢討論既地方多數變高質
- #11 [hahayanyan], 21-04-16 22:56昨天他教了我一些很明顯但我有自己想不到的事情
Haha thx you - #10 [ich], 21-04-16 22:29揾條貼然後PM就得
- #9 [Mouton888], 21-04-16 22:25我有部機想整,可否PM梁師傅的聯絡給我!many thanks
- #8 [邱邱邱邱], 21-04-03 18:10以前過我都講,梁師父確很專業,認真。不單有料且有擔帶。能令玩音響一族,後顧之憂可減少,玩得更安心❤
- #7 [hahayanyan], 21-04-01 13:38Haha he seem healthy and strong.. Haha
都係一個按掣線路板喺relay前面一啲transistor消咗.....( 我非專業嘅初步判斷 hahaha)
跟住又畀我插錯咗220V...(is a1 00V machine)
肯定有啲電容什麼怎麼消咗嘅..... 出咗煙有啲窿味㗎
仲可以開機㗎.. Haha
見到打開機見到個排線都知道如果畀我自己搞第二下都搞爛 those copper trace.. And the PCB.. Further damage.. If I touch it
I like that machine... Haha i be sad.. If I further damage it.. Haha
睇落去都唔係太頭痕呀.... Haha
當然十分願意搬搬抬抬啦
Not scary at all.. Haha he machine is less Than 20kg...too good for health.. For a few lift too haha
Haha
最後修改時間: 2021-04-01 13:45:45 - #6 [mcc2018], 21-04-01 13:21I guess haha boss have to provide 小鮮肉to move that heavy machine, better to stay there for 擔擔抬抬as well......
- #5 [hahayanyan], 21-04-01 10:51我要想辦法說服佢幫我維修a Sony r2r tape machine... Hahaha
等我努力準備資料and 畀佢知道我冇破壞呢部機太嚴重
Hahahah
最後修改時間: 2021-04-01 10:52:02 - #4 [bearbearloo], 21-04-01 10:45
我都多口講句 (我並不認識羅密歐師傅, 亦從未幫襯過佢)
有時係度問野, 佢答得都幾仔細, 所以我幾欣賞佢為人. - 下一頁 (2 of 3)
- 返回 ...
Maybe, next time for equipment less than $10,000 to build up the faith. I can't comment on his repair skill. However, I believe that not everything is repairable due to sophistication, availability of original parts and service manual. The electronic shop in my department was near closed down due to such, multi layer board(easily damaged if not careful, bad contacts at middle layers, double layer would be ok), no identification on IC.(proprietary item) etc.
最後修改時間: 2021-04-22 08:41:41