- #191 [moroishi], 20-05-28 11:56
- #190 [CCHenry], 20-05-27 13:09I am also using Penaudio speakers. I think their drivers are not suitable for HK's high humidity weather.
Sometimes one of the woofers may have noise. But I think the driver is not damaged, it sounds back to normal after I move it softly. May be it did not move smoothly due to humidity changes.
Any member has same experience? - #189 [CCHenry], 20-05-27 13:03I had a look of Penaudio website. It is marked that 昌業音響 (Changye Audio) is their agent in HK and China
-
- #188 [xenon], 20-05-22 16:20Looks like the magnesium surface is peeling, probably have to change the whole driver.
- #187 [AfA], 20-05-12 13:36係Charisma
- #186 [kenngy19741111], 20-05-12 12:36貴價喇叭?
- #185 [AfA], 20-05-12 11:19唔該晒師兄!
- #184 [支持基本自由人7], 20-05-09 23:01搵 柏華音響
- #183 [AfA], 20-05-09 19:45師兄們,請問有冇人知道條膠邊發生乜嘢事,D膠水好似溶咗。想维修可有介紹嗎?謝謝你們。
- #182 [ernest], 20-04-27 15:41搭棚砌分音,正喎
- #181 [wanggogh], 20-04-27 15:35thanks! It is my firewall. I can see the photos now.
I think I may have to take mine to have a health check later. :)
最後修改時間: 2020-04-27 15:45:56 - #180 [xenon], 20-04-27 14:31I think the photo should be ok, i am still able to see it.
- #179 [wanggogh], 20-04-27 12:47#178
Very interesting information! Unfortunately your photos are damaged.
Would you please upload them again? - #178 [xenon], 20-04-26 22:38Been awhile since I own this pair of speaker so decided to perform some upgrade to my Serenade.
Upon opening up, i had the shock of my life, the soldering work is HORRIBLE, you can see some example of huge lump of solder and on some part of the cap is having dry joint and lossing connection.
So cut the story short, totally wasnt expecting this type of poor quality work from Penaudio, crap soldering work for all the hard wiring of the capacitor, binding post and etc.
Since i still like the sounding of the speaker, i decided to swap all the lousy SCR cap to Jantzen Superior Z cap, Dueland resistor, Mundorf inductor and all connection point using WBT.
Totally bring this pair to the next level and certainly max out on the potential.
最後修改時間: 2020-04-26 22:54:21 - #177 [raykkc], 20-04-22 12:02Sara同serenade既分別唔太大
Serenade 唔覺難推, 如果地方夠就買大果對 - #176 [arateli], 20-04-09 17:07請教師兄們,Sara同serenade既分別大唔大,我只用合併機200火,夠唔夠力去控制?主要聽jazz 古典 人聲,謝謝
- #175 [wanggogh], 20-02-17 10:36Sinfonietta signature有氣勢又細緻, 營造音場又好. 愈用愈會發覺佢既好, 依家佢可以非常敏感地反映周邊變化, 好似我好容易發現換線, 加吸音板, 擺位(以每cm計)既改變. 佢令人有不斷提升周邊器材既樂趣, 係好好玩既喇叭.
#174
之前EXN在二手市場清貨, 話唔賣PENAUDIO啦喎.
#125
至於JMR, 以我所知舊款可能係濃味, 但新款應該係反應快, 細緻, 還原音樂能力好.
註: 當初我未聽過Sinfonietta就買了, 我唔知發揮咗佢幾成功力. 新舊JMR我都未聽過, 只係睇網評覺得適合我對聲音既要求.
最後修改時間: 2020-02-17 10:56:36 - #174 [Mouton888], 20-02-17 09:26
- #173 [Siusiu03], 20-02-16 13:08而家香港係咪冇左代理?
- #172 [oldcale], 20-02-16 01:02只是好奇,点解会由 Sinfonietta 轉 JMR??Penaudio 好声啲喎!!JMR 濃味啲,個低音好難玩得好!!
- 下一頁 (2 of 11)
- 返回 ...
不適合聽低頻