- #41 [avdirect], 18-05-11 19:25
- #42 [mun], 18-05-20 21:33請教各位師兄:mutec mc3需要熄機嗎?
- #43 [Qwea], 18-05-20 21:53我就有熄,因為太多燈
-
- #44 [pl6778], 18-05-20 22:47According to the user manual:
Front Panel lock out + LED shut down
When pressing both front panel keys together at one time, all LEDs will shut down except the »POWER« and »LOCK« LEDs. Additionally, the functions of both keys are also blocked to prevent unauthorized operation, which is important during e.g. live events.
During that state of operation, pressing only one of both keys let every appropriate LED light according the device‘s settings as long as the key is pressed. Thus, you can check easily the device‘s settings without unlocking the device nally.
To reactivate the keys and the LEDs, please press both keys for apperox. four seconds until all LEDs light again. - #45 [mun], 18-05-20 23:12多謝師兄p16778:現在明白哂
- #46 [TChan], 18-05-28 06:49請教有無師兄試過將部Mutec MC3 的word clock out 1 & 2 分別設置為1 out 44.1k & 2 out 48.0k 呢?
Thanks! - #47 [pk], 18-05-28 17:24師兄係咪如之前所講咁接?
NB AES —》MC3 —〉AES -》DAC
而 MC3 clock out 接去 NB world clock in ?
我都想知得唔得,之前同 mutec support 問過,佢話要:
you need to change the sampling rates or better you can connect the MC-3+USB with the AES/EBU output of the dCS Network Bridge into our AES/EBU input and use our re-clocking mode to send the AES/EBU out into your DAC.
我無 NB 未試到,唔知係咪得。 - #48 [TChan], 18-05-28 18:26Thanks!
其實我想試玩下轉返NB AES直去DAC,用Mutec MC3個internal clock做NB external clock,
從MC3 word clock out去NB,lock到,不過唱44.1k同48.0k歌仔就要手動轉,所以想問下有沒方法。
Thanks again ! - #49 [pk], 18-05-28 20:08即係駁了
NB AES —》MC3 —〉AES -》DAC
mc3 都不能由 AES input 既 signal get 到 sampling rate 去 generate correct world clock to NB ?
我估就唯有用一位高人介紹既方法,由 music server 駁一條 USB cable 入 mc3,咁 clock out to NB 就會啱 frequency。Music server streamer output 同 USB output set as same zone。 - #50 [TChan], 18-05-28 21:39我係咁玩
dCS NB -> AES -> DAC
然後MC3只用作外置鐘,用兩條bnc cables word clock out去dCS NB
MC3-> bnc word clock -> dCS NB
試玩下,不過不太成功,如果有兩部MC3應該ok。: ) - #51 [pk], 18-05-29 19:41MC3-> bnc word clock -> dCS NB
有無插哂2條? - #52 [TChan], 18-05-29 19:58有呀。用咗兩條Canare bnc
- #53 [tcflex], 18-05-29 23:40C hing
Just to lend one M2tec clock from my friend and use bnc cable to connect world clock out from m2tech to Dcs network bridge clock in . When I check the Dcs app, the lock status is still "No". It seems it cannot lock the clock signal, any hints , thxs to all c hing - #54 [pk], 18-05-30 00:09咁就唯有試吓由 music server 駁一條 USB cable 入 mc3.
- #55 [TChan], 18-05-30 06:41可惜dCS NB未有usb out
- #56 [TChan], 18-05-30 07:43#53
情況同我應該差不多,可參考以下 - #57 [pk], 18-05-30 08:22不是用 dCS USB out,如果你用 Roon 之類,可以由你的 Roon server 加一條 USB output to mc3 同時播同一首歌,將 Roon server stream to NB,同 USB output set 做同一個 zone,就會播同一首歌,同一個 sample rate,咁 mc3 就可以 generate 啱既 word clock rate 俾 NB,不用人手轉。
有師兄咁用緊教的。 - #58 [TChan], 18-05-30 09:30Thanks !
我主力經NB聽Tidal又沒有用Roon。
可能要等NB有usb out再試,又或者用兩部MC3!
Thanks again ! - #59 [TChan], 18-05-30 10:32間中會聽下NAS里面24/96 FILES
- #60 [mun], 18-06-03 14:41mutec mc3+usb接CD transport效果怎樣,有師兄試過嗎?
- 下一頁 (3 of 9)
- 返回 ...
How is the improvement? Cybershaft better or Teac better?