- #1 [Kt120], 23-05-06 10:51剛入手，發現load impedance 100 ohm, 我隻牛係10 ohm or 40 ohm, 得唔得，上網睇多数牛都係40ohm 或以下！
- #2 [rcywong], 23-05-06 11:03The best way is the load impedance higher than the source impedance. The more headroom is better.
- #3 [bambino], 23-05-06 13:27#1, 樓主的SUT是10x 或 20x 放大嗎？
最後修改時間: 2023-05-06 13:27:22 -
- #4 [Kt120], 23-05-06 13:38Entre 3, 10 or 40 ohm
前用denon dl 103, softer in tone, now the at33 is better in clarity, 弱音多好多，但人聲又無denon 咁暖。
最後修改時間: 2023-05-06 13:40:57 - #5 [41450686], 23-05-06 13:56冇辦法啦要換隻牛玩下, 除非你用原子粒放大. 我有AT-OC9同DL103R,唔使畀啦audio technica靚聲好多, dl103留返嚟粗用
- #6 [bambino], 23-05-06 14:02樓主,你的SUT應該係Entre ET-100, 有以下三個settings
- 3 ohm (32dB, 40x 放大)
- 10 ohm (26dB, 20x 放大)
- 40 ohm (20dB, 10x 放大)
以上3/10/40 ohm是指唱頭的Internal Impedance (吾係SUT喺Input Impedance). AT33 MC頭的internal impedance是10ohm. 所以選10 ohm就可以.
最後修改時間: 2023-05-06 14:08:35 - #7 [Kt120], 23-05-06 16:08感謝以上各師兄指導!今晚試吓，再聽真D，因宜家set 响40ohm, 今晚再試10 ohm.
- #8 [hahayanyan], 23-05-07 15:29Load impedence is fun
我有幾隻 平價嘅 microphone transformers, 我用嚟 diy Mc 牛, 自己前前後後加電阻plug, 隨時change load impedence.. 好好玩㗎
Have fun.. Explore different loading.. Which may sound nicer with particular system and type of music
Haha - #9 [Kt120], 23-05-10 07:52多謝bambino師兄指點， 10 ohm setting very good! AT33 完勝denon 103r, 細緻好多。
最後修改時間: 2023-05-10 07:53:10 - #10 [bambino], 23-05-10 09:30good! 有興趣的話，可以上網看看 "唱頭Internal/Coil Impedance" 同 "Load Impedance" 嘅分別. 應該如何選擇吾同既數值. 以後玩其他唱頭或SUT都有幫助。
最後修改時間: 2023-05-10 09:31:21 - #11 [rcywong], 23-05-10 14:24Kt hing, which model AT33 you owned? Is it AT33Sa?
最後修改時間: 2023-05-10 14:25:59 - 返回 ...
AT33 MC 針配牛問題？