- #521 [welborne], 15-11-16 17:23我從來沒想過La Scala可以有咁嘅聲音,跟10年前的初體驗是十個翻,多謝網上Klipsch Community群組的豐富資訊才渣出它的本色
- #520 [MOSbill], 15-11-16 16:52one day, if you upgrade, let me know ....
(you know what i mean ... he he ) - #519 [welborne], 15-11-16 16:32Mosbill兄,我的Type A分音在換上了油浸紙電容後和solid core 純銀線接線,現在㷛了一輪,突然跑出音埸出來了,純銀令聲音更厚和純,多了份冷靜,音場也後退了不少,現在居然和障板可決一高下。自己也覺得有點不可思議。
by iPhone / iPad App
最後修改時間: 2015-11-16 16:47:07 -
- #518 [MOSbill], 15-11-16 16:02incredible !
- #517 [welborne], 15-11-16 15:37The story never ends....
Bought 2.5 dozens of copper non-magnetic screws and washers to rebuild the already very good Type A crossover, aiming at 100% wire-to-wire connections without using any 排插at two ends of the network. Just wind the lead legs around the screws and crimp them together by the washers - #516 [welborne], 15-11-14 18:28Bob Crites even sells one with a replica of the same T35a/K77 horn
- #515 [welborne], 15-11-14 18:26About La Scala tweeter replacement:
http://www.critesspeakers.com/new-tweeter-replacement-for.html
Above is a comparison between stock k77 and B&C De120 (the one I am using now).
Do you need a new tweeter? Well I can't speak for you but in my case there is a practical necessity about this. I like the sound of the ultra simple Type A crossover so much (6db slope) more than the later iteration (such as AL-3 in my pair) but the cruel fact is that the old K77 tweeter, regardless how well or bad it sounds, is rather fragile and volunerable to damage in such a gentle slope network without some kind of protection built in. A modern replacement such as the DE120 can take more beating. Not to mention it sounds smoother (due to lower THD at the same wattage input). - #514 [welborne], 15-11-13 17:40Klipsch K33 and K43 woofers are indeed made by Eminence for Klipsch.
- #513 [welborne], 15-11-13 17:16Klipschorn, La Scala and Belle owner:
Here is a cheap tweak advice from a long term Klipsch owner and PA consultant
https://community.klipsch.com/index.php?/topic/149442-lascala-sonic-detail-improvement-for-only-22098/ - #512 [welborne], 15-11-10 22:56The La Scala paper presented by Paul Klipsch in 1965 at the Audio Engineer Society Convention
https://community.klipsch.com/index.php?app=core&module=attach§ion=attach&attach_id=113741 - #511 [金蛇郎君], 15-11-10 16:51原装的只是參考,diy有個人的風格,和實制的需要,做得好,正
- #510 [welborne], 15-11-10 16:02原裝是這樣,是kits 來,香港有代理啊 :)
- #509 [welborne], 15-11-10 16:00金蛇兄:
個overall size 是跟足Bastanis 原廠,我只是畫蛇添足,加些歐洲風格而已 - #508 [金蛇郎君], 15-11-10 15:51障板是否自己設計的,
- #507 [welborne], 15-11-10 00:37Trying to see if the excellent Bastanis Gemini tweeter (made in Bulgaria) can match with the La Scala.
- #506 [welborne], 15-11-09 23:31@@
- #505 [welborne], 15-11-09 23:30我不斷反問自己:
1)full body 的肉地重要嗎?重要
2)完全離箱像飛到去大舞台的音場重要嗎?重要
3)那個更原音?來過的朋友不少,而且都不是初哥,有的話障板更真,有的話horn。我話兩個都係假,睇你鐘意咩多啲。
有樣樣都兼備的嗎 ?可能這個 - #504 [welborne], 15-11-09 23:02久未開聲的障板今晚再上陣。經幾個月的horn 洗禮後,再次調整一下個ripole 的分頻點。
Bastanis 的確沒有La Scala咁 full body 但是這full bodiness 也是箱聲來源,Bastanis 隨時隱形的能力,我對La Scala 拍馬追不上。而且 Bastanis resolution 更高,也更coherent。 經調整分頻點後Bastanis 也比之前更full body, 更有肉地,更接近La Scala之餘,也更透明 - #503 [welborne], 15-11-07 23:51少少咁啦。也幫朋友一齊買。想砌多一個不同的
- #502 [alinmont], 15-11-07 23:39welborne兄
買很多俄 caps.? - 下一頁 (3 of 29)
- 返回 ...