請問各位師兄馬蒂斯AT0M前级配甚么後級比較好声 胆或石机  請推介型號

最後修改時間: 2014-05-06 07:54:15

推乜喇叭？

Atom輸出抗阻較高. 配後級要小心. 我之前配過Threshold直頭冇低音.

我用ls35a 想玩黑膠 前級用 一枝德仔x7 及一枝mullard t7 但覺得高音比較差

最後修改時間: 2014-05-10 10:27:16

可以形容一下高音聲音怎樣差？
Matisse有改過嗎？
新膽還是舊膽？

配Conard Johnson MV55啦，我玩過，天仙配

#4

Mullard tubes sometimes have muffled HF, if Mullard-Tele combo doesn't provide a nice HF, try Amperex-Tele combo.

Please check the negative feedback resistor, Rodney Henson may vary his choice of -ve feedback, he sometimes uses 47K and sometimes 68K, if yours is 47K, try to change it to 68K.

請問師兄呢對前級是否用一對12AX7呢?

全机只用兩隻胆,12at7,12ax7 各一

師兄, Thanks.

thank you 各位師兄

麥提沙前級配CJ後級真係好夾,之前喺某二手舖聽過,不過唔記得咗型號

matisse配石機都好好聲，
雖然我也是用Amperex，但在狀態的其他膽，我也不覺高音有不夠現象播....

I used the Matisse Reference into CJ Premier 11a in the late 90's. Like the sound very much. Only complaint is their QA, was told that HK importer does more QA for the HK units, so it's more reliable. My unit was brought directly from Mastisee in UK, so it was a little bit messy in terms of QA but did not affect performance, just personal opinion ...



最後修改時間: 2014-05-12 15:16:44

#14

Commonest problems: 1. L/R attenuator mismatch caused by incorrect resistors, 2. The star-grounding point is a mess, Rodney insists low temperature soldering of his special cadmium-containing solder, and he does that in his kitchen (to make use of the ventilator hood) which has suboptimal illumination.

Rodney 只是sub contract 做機,顧用低智人仕,我那部就連rca制都未焊,Rod 本人是厨師,他做菜比做
機出色,他移民印度前用餘下零伴做了兩三部 Fantasy前級,朋友買了一部,volume制 由 Elma 变左 Alps
後期機種已經沒用cadmium solder,因會玫癌.

Yes, quality deteriorated over the years, first from HR type PRC resistors to SX type, then to Holco.

有師兄話加枝 gec12t7及一枝德律風根12x7會比較好聲 但係枝gec12t7 成千幾 是否值得買?

如果想換跟机膽，一次過換晒兩支膽(12at7 & 12ax7)或是遂一更換？有沒先後次序？請指教？

最後修改時間: 2014-05-13 12:51:35

分開遂支試，12AX7影響大些。