- #29 [yatchboats], 22-08-06 10:06加多部mono amp
- #28 [Marco168], 11-09-14 23:30一定係1709推MK的問題
- #27 [wahwu], 11-07-13 23:44是不是喇叭線反相
-
- #26 [kj1201], 11-07-12 18:40乜你無用部amp個mic仔做auto setting咩?洗乜咁煩呀.我部cheap雞av amp做完auto setting都ok喎!
- #25 [hocch], 11-07-12 16:27一定係1709推MK的問題,你借部28XX, 38XX, 43XX系去試一試, 你就知la
- #24 [Marco168], 11-07-03 22:33好難set到完美呀,會唔會有啲師兄上門幫手set機呀???
- #23 [cpu8088], 11-06-29 14:04u can have mono block power ampsfor multi channel.
what so special about it?
that link exposed u do not understand chinese.
最後修改時間: 2011-06-29 14:05:44 - #22 [MDLP], 11-06-29 12:27Cpu你連mono機同stereo機都搞唔清楚
點學人講多聲道
https://www.review33.com/avforum/forum_message.php?topic=38110616011652
最後修改時間: 2011-06-29 12:28:42 - #21 [Marco168], 11-06-29 12:03唔好意思我英文唔好!但請師兄你繼績解說,唔該晒!係尼師兄你用緊咩器材???
- #20 [cpu8088], 11-06-28 18:22how come your name is marco and does not know english. lol
get your friend to help you in translation. i cannot input chinese. - #19 [Marco168], 11-06-28 16:17好難set到完美呀,會唔會有啲師兄上門幫手set機呀???
- #18 [Marco168], 11-06-28 16:13可唔可以用中文解說呀?唔該cpu8088兄
- #17 [cpu8088], 11-06-28 15:29"""250隻十仔度校返80kz呢"""
if u do this it means the bass from 80 to 120hz will disappear.
your av receiver will make a low pass of 120hz while your subwoofer will make a low pass of 80hz so the 80 to 120hz sound will be cut out.
i dont think u want this to happen.
- #16 [cpu8088], 11-06-28 14:38your subwoofer crossover should be set at maximum. this means your av receiver will take up the job and cross at 120hz.
if sub too hot u just turn down the volume control at the subwoofer. best at 9-10 o clock and also adjust the av receiver speaker settings so all speakers match sound level.
unless u are using satellite speakers 120hz is a bit high. thx standard is 80hz and if u are using small bookshelf speakers 100hz is very common. if u use refrigerator size speakers u may set at 50hz or 60hz. just a guideline. - #15 [Marco168], 11-06-28 13:54最新setting,cr120kz先可以有返人聲,但超低就過哂火!!!我係咪要係250隻十仔度校返80kz呢???唔該哂各位師兄
- #14 [cpu8088], 11-06-21 19:03your center speaker is 80hz to 20khz. with your receiver set up try with setting speakers as small and crossover at 80hz or 100hz. regarding sub. make sure crossover set at maximum and volume level at about 9 to 10 o'clock. then calibrate the sub level with your spl meter. if other speakers have been calibrated at 75db then the sub should be about 72db as the spl meter is insensitive to low bass so the 72db as adjusted will be equivalent to 75db.
too hot subwoofer will overwhelm the dialogue from center speaker.
最後修改時間: 2011-06-21 19:04:13 - #13 [alan093301820], 11-06-21 18:48i feel that the av amp power is not enough.
i used 2308 and 3007 now. that is a different world.
it cannot set up to solve - #12 [olddude], 11-06-21 18:40Is your center speaker firing directly towards the audience? It does make a difference.
Have you checked the high-pass crossover setting for the center channel? If your center speaker is small and the crossover is set too low, the lack of mid-bass may sound "weak".
If all else seems OK, it won't hurt to kick up the center level a dB or two.
最後修改時間: 2011-06-21 18:43:06 - #11 [Marco168], 11-06-21 18:30all the movies i played
- #10 [Marco168], 11-06-21 18:29各位師兄我已經用咗音壓錶啦,但都無戲院啲人聲咁實在同雄渾
- 下一頁 (1 of 2)
- 返回 ...