- #41 [OR], 16-05-11 13:38
- #42 [OR], 16-05-11 13:39dipole
- #43 [OR], 16-05-11 13:40T-joint
-
- #44 [OR], 16-05-11 13:40T-joint 2
- #45 [OR], 16-05-11 13:40膠管
- #46 [OR], 16-05-11 13:41Belden
- #47 [OR], 16-05-11 13:41Balun
- #48 [OR], 16-05-11 13:42Balun 2
- #49 [OR], 16-05-12 10:56呢個做法係盡量減輕天線的重量,方便掛在窗邊,用 3M 貼鈎已經可以。另一點要留意的是銅枝不要和其他金屬物接觸,以免影接收質素。
天線是 FM 的音源,好比訊號線,用不好的天線,買幾貴的 tuner 都係浪費,就好似尐人用名貴音響去聴老番一樣。比心機去 DIY 一條 FM 天線是值得的。 - #50 [ckwan2014], 16-05-12 11:59OR 師兄,問多少少T-joint位個接線,係左右銅枝都駁入75(Ohm)線芯?
- #51 [OR], 16-05-12 12:30#50
兩枝銅枝,一枝接 75ohm 網,一枝接 75ohm 芯。 - #52 [cat2013], 16-05-12 12:33#49, OR兄,
可用#14號約2mm漆皮銅線串入膠喉中,又靚仔D,唔知效果如何呢?可以嗎?謝謝! - #53 [OR], 16-05-12 12:39#52
可以的,不過銅枝的引線由膠管內由 T 位出比較難處理。 - #54 [cat2013], 16-05-12 13:17#53,
其實可用个三叉加3條膠喉兩長一短成左个T形,
其實用漆皮線是否適合呢!原因是果條銅粗太幼之分別,
因小弟只有些漆皮線是14號線在手,正看到這个貼,
不再想打皮$買先提出此問題,小弟忠於聽收音機的人,
莫怪! - #55 [ckwan2014], 16-05-12 13:28#51,thx!
- #56 [OR], 16-05-12 14:18#54
Good idea! 未試過用漆皮線,14號線有1.63mm, 粗幼應該唔係問題。我有想過鍍銀線代替銅枝,有時間會試試。 - #57 [ckwan2014], 16-05-12 15:54醒起屋企有條雙拉桿天線,可以擺成T字,拉幾長就度尺計數,或者會有同樣效果。就係差個Balun姐,搵條長Cocial繞三個圈應該有得諗!
最後修改時間: 2016-05-12 15:58:44 - #58 [chiu123], 16-05-12 16:19正。
- #59 [ModernClassic], 16-05-12 18:57" T " type of antenna is 240Ohm at resonant, so one cannot use co-axial cable and 75ohm tuner input. Further this type is directional one needs to turn it to the desire direction for best result.
A good and expensive tuner should be able to give good result even the reception condition is not ideal/weak.
Have fun! - #60 [Forfun], 16-05-12 20:53From Wikipedia, the free encyclopedia - Dipole antenna
https://en.wikipedia.org/wiki/Dipole_antenna
"The radiation pattern of a vertical dipole is omnidirectional; it radiates equal power in all azimuthal directions perpendicular to the axis of the antenna."
"Ideally, a half-wave dipole should be fed using a balanced transmission line matching its typical 65-70 Ω input impedance. Twin lead with a similar impedance is available but seldom used.
Many types of coaxial cable have a characteristic impedance of 75 Ω, which would therefore be a good match for a half-wave dipole, ...." - 下一頁 (3 of 8)
- 返回 ...
我 DIY 的 dipole 所需元件:
1)銅枝兩條,每枝約 25-26 吋
2)膠管一條,約 56吋
3)熱縮通
4)75ohm 引線
5)索帶
6)鉛筆一枝
首先要計算銅枝的長度,可以用 Dipole Antenna Calculator
http://www.csgnetwork.com/antennaedcalc.html
銅枝的粗幼問題不大,幼身輕些,銅枝要用熱縮通包封防銅銹。
要補充一點,用 Antenna Calculator 計算出來的長度只是理論上的長度,DIY FM 天線最大的問題是唔可以用儀器去測試,手持機 88M - 108M 都係只可以接收而唔可以發射訊號,民用駐波表亦沒有呢個頻段,只可以靠經驗,實際的經驗是將長度乘 0.95, 效果是最好的。
膠管是用來承托銅枝的,亦可用木,但不可以用金屬物料,如果用金屬物料本身也成了一枝天線。用膠管較輕,但日子耐會有些彎弓。
75ohm 引線我用 Belden 呢款,糼身鍍銀,又輕,華輝有售,華輝對面有一間都有得賣,平一半,我唔知是否 A 貨,線身字較朦。
製作:
首先將膠管中間開一小孔,讓鉛筆穿過,亦可用膠枝/木枝,主要是固定引線個 T 位。
引線個 T 位要造一個 Balun (balance unbalance),Balun 的原理可以 Google 一下。Balun 的直徑是 6 吋,將引線繞三個圈便可以了。
引線個 T 位(直線)要有 20 吋長。
索帶是用來固定所有線位。
Happy DIY!