- #27 [真正用家], 24-04-01 14:44其實咁重針壓，對唱片有冇影響
- #26 [blackspin], 22-07-05 07:57#24
The Uesugi U BROS 5 Type L is one of the best SUT for matching with SPU, I have used it with my SPU Gold GE with very good result. If budget allow, always use a single impedance transformer for each impedance range MC cartridge......... - #25 [w.lo.bc], 22-07-05 01:43選挥可以很多。由vintage UTC A10, A11, 至ortofon T 系，视乎效大倍數，line amp gain 而定。要match loading impedance, 等考慮。
Spu 有多數，輸出可低至0.18mV , 高至0.5mV, 分別很大。
可能愈聽愈亂，真係要自己試。 -
- #24 [真正用家], 22-07-04 21:33Spu配邊隻昇壓牛
- #23 [w.lo.bc], 22-07-04 00:39SPU Century, wood A, Royal mkII
FR66s, 有時就轉3012R.
Wood A is surprisingly good. 聽室樂中音好靚
- #22 [linda.0416], 22-07-03 21:42
- #21 [linda.0416], 22-07-03 21:41
- #20 [raymondelsit], 22-01-13 12:28RMG-309 + SPU Royal-N
RMA-309 + SPU Gold
最後修改時間: 2022-01-13 12:32:16 - #19 [raymondelsit], 22-01-09 08:27我用全套
- #18 [jules], 22-01-09 07:57我也是用sme 臂， 3012s1加adaptor 俾A頭
雖然唔係最理想但為咗方便冇辦法 - #17 [ernest], 22-01-08 23:18SME 3012R
- #16 [真正用家], 22-01-08 21:53Spu 1E
- #15 [真正用家], 22-01-08 21:52呢個平價spu 如何？
- #14 [dttmtong], 22-01-08 20:39SME M2-12r
- #13 [真正用家], 22-01-08 20:21Sme 3010R
- #12 [jules], 22-01-08 18:00咁大家用乜嘢臂夾你地嘅SPU?
- #11 [jules], 22-01-08 17:58SPU A meister red
My favorite - #10 [hahayanyan], 22-01-07 20:42咁多唔多人改裝 spu.. Without the whale casing?
Or crave another whale casing... With other material?
Haha
最後修改時間: 2022-01-07 20:42:33 - #9 [k.c.78], 22-01-07 20:4085週年
- #8 [hahayanyan], 22-01-07 18:13嘩咁重㗎
Thx thx - 下一頁 (1 of 2)
- 返回 ...
Ortofon spu