- #60 [CodyChan], 25-01-21 22:51Thanks for Johnny sharing.
- #59 [johnnykmtang], 25-01-21 18:11Hello CodyChan,
You can play with the LoadLine Calculator to find the parameters, output power and THD for the KT150 in SE mode.
https://www.vtadiy.com/loadline-calculators/loadline-calculator/ - #58 [johnnykmtang], 25-01-21 17:37Here's the schematic
-
- #57 [johnnykmtang], 25-01-21 17:36According to the simulation, the KT170 (triode strapped) would have approx 8 watts rms with 2K load.
Would that be enough output power you are looking at?
Johnny - #56 [CodyChan], 25-01-21 15:46眼見 Tung-Sol KT-170 價錢低過1000蚊, 非常吸引, 請問有無師兄有單端線路圖給小弟參考呢?
- #55 [johnnykmtang], 24-12-02 18:00Hi Cody,
Ran the analysis of the 6SJ7 (triode mode) with choke load. The result is excellent.
B+ 185V, idle current : 8.8mA, output : +/- 40V.
THD : 0.25% (H2 0.25%, H3 : 0.02%)
The Hammond 156C plate choke (150H) is rated 8mA. Therefore, you may reduce the 6SJ7 current to 8mA by changing the cathode resistor to 680 ohm.
The amp should sound pretty good indeed.
JOhnny - #54 [CodyChan], 24-12-02 13:00#53.
Hi Johnny,
FYI - #53 [johnnykmtang], 24-12-01 16:24Hi CodyChan,
Wondering if you would share the schematic of your 71A amp. Love to learn the circuitry.
Johnny - #52 [CodyChan], 24-12-01 11:32剛從日本回來, 上星期沒空回覆.
先祝各位細膽用家來年萬事勝意!
遲啲再更新我部製作中71A資料. - #51 [johnnykmtang], 24-11-27 00:50Here is the schematic
- #50 [johnnykmtang], 24-11-27 00:40Helena 45 baby 改造後再次登埸
Changed the 6SJ7 plate 47K resistor to 27K for better linearity. Screen voltage : 120Vdc.
Fine tuned with FFT at oscilloscope for minimal distortion from 6SJ7.
The output transformer is Lundahl LL2766 50mA.
最後修改時間: 2024-11-27 00:43:46 - #49 [BB1668], 24-11-24 17:44我部机的輸出牛只有OPT-879
最後修改時間: 2024-11-24 17:44:25 - #48 [johnnykmtang], 24-11-23 03:04Hey Cody,
I don't think he LL9202 transformer will fit in your VT-25 amplifier. The size is way too big for it. - #47 [CodyChan], 24-11-22 14:32其實依家部 VT-25 都好滿意, 不過轉吓新牛都好嘅.
- #46 [johnnykmtang], 24-11-21 17:24Hi Cody,
The VT-25 (10Y) tube plate resistance is approx 5K. The datasheet recommends using 10K load for 1.5 watts output.
Johnny - #45 [Welborne], 24-11-21 16:19其實我手上仲有幾部超微型輸出機
Colin 5687s: 0.3w
Colin 5687 dc 5687: 0.9w
Colin 417a-dc-71a: 0.7w
日本 71a-Vt62 se: 4w
日本 6j5 - VT25: 1.5w
日本 Aa-Ca: 0.2w
以上機器主要是配合我手上最少效率95db-100db (50hz above)的揚聲器系統,有些可能要「打茅波」50hz加個subwoofer才能享受到這些蚊蠅輸出膽機帶來夢幻般的聲音,但如果不聽大棚音樂,其實不用開subwoofer,已經大聲到我諗一般屋企隔籬屋已經投訴,這不是一般玩法,但我絕對不介意。
還有一部 300B單端,輸出正路大概8W, 最近換了一對新嘅 金音錸300B膽,聲音的確進步不少,尤其是細緻度,但跟以上的蚊蠅輸出機比較,味道還是相距甚遠,不過有8W應用範圍始終比較多一些,因為手上還有一些效率比較低的喇叭要服侍(91db對我來說已經是非常低效率)
最後修改時間: 2024-11-21 16:38:25 - #44 [CodyChan], 24-11-21 14:11LL-9202 price...
- #43 [CodyChan], 24-11-21 13:55#41.
Not yet!
Considering LL-9202 or LL-1620 for my lovely VT-25 SE. - #42 [gogo2010], 24-11-20 17:28Thanks Welbrone 兄
- #41 [johnnykmtang], 24-11-20 16:56Hi Cody,
Have you bought the Lundahl OPT?
Johnny - 下一頁 (1 of 3)
- 返回 ...