- #77 [ordinaryman], 11-06-06 12:19
- #76 [cominox], 11-06-06 10:17ordinaryman ching:
唔該晒
但
ultra 500 & V15xMR兩者是不同款針,不可互換 - #75 [ordinaryman], 11-06-06 10:09"ultra 500 & V15-MR兩者是同款針,可互換"
Yes, both of them have the same 0.15x3.0 stylus. -
- #74 [ordinaryman], 11-06-06 10:07It seems that your eyes are more "old flower" than mine:)
There you go.
V15V-MR / V15VxMR
Frequency response: 20-28K +/-1.5 / 10-25K +/-???
Channel separation, 1KHz: 25dB / 30dB
Channel separation, 10kHz: 18dB / 20dB
Output, 1KHz: 3.2mV / 3.0mV
Recommended tracking force: 0.75-1.5g (another book shows 1-1.25g) / 1g
Recommended load resistance: ??? / 47K
Recommended load capacitance: 250pF / 250pF
Stylus radius: 0.15 x 3.0 um / 0.15 x 3 um
Weight: 6.6g / 6.6g
最後修改時間: 2011-06-06 10:12:19 - #73 [cominox], 11-06-06 09:36ordinaryman ching:
字粒太細,不清楚呀
ultra 500 & V15-MR兩者是同款針,可互換 - #72 [ordinaryman], 11-06-06 06:08My Shure V15 IV and V15xMR. Both were bought from the original Mongkok Hi FI Centre.
- #71 [ModernClassic], 11-06-06 05:59To get the maximum quality of of a Shure Ultra or V15 IV or V is not simple.
" light" arm (around 10gm effective mass)should be used to match the dynamic compliance of the cartridge. SME III is special designed for the mk IV.
The load capacitor will definitly affects the high frequency response curve.
Once it is properly set up, it is an excellent cartridge. - #70 [ordinaryman], 11-06-06 05:39
最後修改時間: 2011-06-06 05:54:03 - #69 [ordinaryman], 11-06-06 05:26V15xMR
Happy listening - #68 [ordinaryman], 11-06-06 05:25Shure V15xMR
- #67 [ordinaryman], 11-06-06 05:23V15-MR
- #66 [ordinaryman], 11-06-06 05:22Cominox,
My apologies, the file is too big and I had to cut it into 2 halves.
Shure V15v-MR (MircoRidge) - #65 [cominox], 11-05-31 22:53等咗成年無人履,算吧!!!!
送上掃描畫一張,經典之作 - #64 [cominox], 10-06-08 18:01請問
Shure 後期V15VxMR,前期V15V-MR在規格上有什麼分別?
最後修改時間: 2010-06-08 18:03:26 - #63 [louisalee], 10-02-27 23:49你看這裏:
http://www.av-forums.net/plus/viewthread.php?tid=66404&extra=page%3D1
有人話Shure V15 Type V MR, 一般過一般, 名不副實 。
真是口味各不相同
各有各吹 - #62 [kcc123], 10-02-27 01:41差點忘記很多phono stage的MM部份 都設定在100pF, 所以耍加埋一齊才算準確.
- #61 [kcc123], 10-02-27 01:37我可不是大師, 不耍太抬舉我了, 我會面紅的, 嘻嘻!
條線只得37pf/meter係低咗d, 除非唱頭好dull, 否則換咗佢吧! 通常好多線有大約100pF/M左右. - #60 [cominox], 10-02-27 01:21kcc123大師:
找到原裝條phono cable is 37pf/meter
係唔係低咗d?
唯有攪條綫
最後修改時間: 2010-02-27 01:23:41 - #59 [kcc123], 10-02-27 01:18我認為在輸入端焊上適合的電阻或電容會比較容易和直接了當, 而旦不需要焊出在線路板上的零件來替換, 換上多次都不用担心損壞線路板.
- #58 [cominox], 10-02-27 00:17多謝資料圖片
好有興趣知道怎樣改放大器線路來增加幾個pf(150,250,300),好玩喎,就用640p做例子. - 下一頁 (2 of 5)
- 返回 ...
"ultra 500 & V15-MR兩者是同款針,可互換"
"ultra 500 & V15xMR兩者是不同款針,不可互換"
???
Funny to hear you said totally opposite things in just an hour.
I personally have no experience with ultra 500 and I just concur your "first" opinion after checking the audio annual book that they both have the same 0.15x3.0 stylus.
Have fun!