- #1 [AAD], 09-12-15 10:22請問這神物尚在人間否?邊度重有得賣??謝謝!!!!!
- #2 [cominox], 09-12-15 13:05second market only
- #3 [accudude], 09-12-15 14:54Yes,the cartridge should only be found in used market. However, I have seen NOS stylus for sale at some US sites, but at the ridiculous price of US$300-400. At that price (plus the price you pay for the used cart itself), it would not be quite worthwhile.
-
- #4 [cominox], 09-12-15 18:39等了個幾月,剛收到從日本寄來的神物,心情當然興.
- #5 [cominox], 09-12-15 22:32拆盒睇睇結構外觀不錯,針端不是尖形,疑似刀狀
- #6 [cominox], 09-12-15 23:17在外國買V15V,隔山買牛,心驚驚到手可新可舊
在日本全新唱針重有得賣,可是玩家的一線希望
在秋業x,有shure V15V原装針賣,不訪望望,包你有驚喜 - #7 [sv.40], 09-12-16 01:59cominox hing, seems your new stylus is not the original one from Shure, right? How much and how will you compare with the original?
- #8 [sunboy], 09-12-16 09:21cominox hing,
check pm please !! - #9 [clubbest], 09-12-16 09:29glad to hear such info, would u pls share yr comment abt the new stylus, tks.
- #10 [billeung], 09-12-16 13:09that's why I bought 2 sets 10 years ago
(one set is using , one set brand new for spare) - #11 [cominox], 09-12-16 18:48在香港可以買到shure全新V15V唱針,亦可從日本order代用針,昨天收到早前訂購的VN5MR(SAS針).在數年前,原裝針斷了,已記不起V15V-MR的實質聲低,現只能和Me97HE互相比較,雖然級數不同,亦去嘗試.裝配好後落針,發現為何比以前用開MM頭細聲,上網摷料,知其輸出得3mV,有少少唔習慣,其次沒有97HE剛强味,V15V帶點溫柔,柔情似水,這是聽了2小時之感,這SAS針槓很幼細,真係要小心對待它,針壓1.25g
還望各位大老指點一下小弟...........怎樣玩盡V15V-MR配SAS針
http://www.jico.co.jp
最後修改時間: 2009-12-16 18:49:59 - #12 [iloveu], 09-12-16 20:42cominox兄,枝代用針貴唔貴,連運費幾銀呀?
Thanks! - #13 [cominox], 09-12-16 21:56iloveu:
13125元+空運費65港元
我估平過原裝針,但聲低靘得過嗎? 就有所保留,始於忙記原裝聲低,無法比較
最後修改時間: 2009-12-16 22:02:00 - #14 [hifibb], 09-12-16 22:14cominox 兄:
V15-MV配SME3009用1.g好正,比ADC-ZLM ,EMPIRE-2000E/III輸出大,我用MARANTZ 3650前級 47k 100pf
最後修改時間: 2009-12-16 22:18:51 - #15 [dynaco], 09-12-16 22:55cominox,
How can I buy this VN5MR(SAS針)??
THX! - #16 [cominox], 09-12-16 23:47dynaco,
我曾問代訂日本貨的上樓鋪報價$1380
有一點要留意,因世界各地太多人訂SAS針,JICO講明需輪候一個多月オ出貨,再加上日本新年假休息,祥情睇JICO website,要耐心等侯呀... - #17 [cominox], 09-12-17 21:36可否有V15typeⅣ,V15V-MR,V15VxMR的規格表?
- #18 [dynaco], 09-12-17 21:59cominox,
Would you mind telling me the 代訂日本貨的上樓鋪's name??? And where is it?
THX!!!!
dynaco! - #19 [cominox], 09-12-17 22:23在台灣網有個post:
雷版主你好,
我的唱針是shure v15v,唱針的針尖不見了,可能被我撞掉,能修嗎?價錢?
我們可以為您維修, 目前提供人工半鑽的針尖與天然鑽針尖二種, 價格分別為2,000及5,000 元; 您可以寄過來給我們, 等到唱針修好時我們會透過郵局寄出, 貨到再收款. - #20 [cominox], 09-12-17 23:21在外國討論區摷到料,唔怪得比以前用開MM頭細聲,原來:
The magnet; output is speced to 2 mV compared to the 3 mV of the original Shure. May be a smaller magnet included (less mass, but weaker magnet?).
還有
The suspension; it appears that ideal VTF is 1.25 grams of the JICO compared to the 1.0 of the original. So different compliance perhaps.
嘜枝針都會影響個頭輸出電壓???????????????????????
未落訂朋友要孝慮一下--------------輸出細
要與放大器組合,一般MM頭有4mV,而佢得2mV,真你唔識玩,怎樣玩V15V-MR配SAS針呀?比JICO玩潻!!!!!!!!!!
最後修改時間: 2009-12-17 23:35:37 - 下一頁 (1 of 5)
- 返回 ...