- #1 [sp11], 16-02-02 11:24
- #2 [achow], 16-02-02 11:36我入會
有L5 Mentor 同DAC4.1 (Total of 3 boxes)
上星期先收到貨,現在每晚砌d,希望2月底前全部完成 - #3 [sp11], 16-02-02 11:40achow 兄,歡迎入會!
Mentor是好機,驚喜不絕,比D心機玩呀。 -
- #4 [achow], 16-02-02 11:42
比個update 大家, 最近個DAC 4.1 M2 power supply 上面一粒0.47uF Cap己轉2.2uF size
我自已會試返0.47uf 先,之後再轉返2.2uF - #5 [user_aaron], 16-02-02 11:49Clone得唔得?
- #6 [sp11], 16-02-02 12:44玩kit都係diy,clone當然歡迎
- #7 [TigerFoo], 16-02-02 14:41Mentor個gain幾大?用緊個後级好大gain.
Thanks - #8 [f007k], 16-02-02 15:26上個月從DAC2.1升级到DAC4.1
- #9 [sp11], 16-02-02 15:47f007k兄,4.1有何突破?
- #10 [sp11], 16-02-02 15:53小弟初玩ANK,未能見證其產品的進化,各師兄請多多指教。
- #11 [f007k], 16-02-02 17:59聲音分離度更好,背景靜了.
- #12 [F007k], 16-02-02 18:14我dacㄧ月份才剛升級的, 但M2 power supply 還是用0.47uF。升級後gain比之前細了一些。
- #13 [achow], 16-02-03 10:14I get this from my mentor kit.
I think this is new, which I don't see it on manual.
I asked Brain how to use it. This is his reply.
"the new PCB is just an easier way to do the IEC connections – it’s a little board that attaches to the 3 holes with standoffs at the rear of the chassis near the IEC rocker switch area – see the graphic attachment – you basically connect the 4 wires from the Mains primary to the IEC board mounted at the back of the vchassis – and then you configure for 120 or 234 v depending on yoru world voltage – and then connect the outputs to the rocker switch with a wire with a crimp on the end – let me know if you need any help!
So for Hong Kong – use the 234 mode ( hong kong is 220)" - #14 [user_aaron], 16-02-04 10:00
- #15 [epkwokgp], 16-02-04 10:21金鷄十二樓
最後修改時間: 2016-02-04 10:21:30 - #16 [user_aaron], 16-02-04 10:23有冇師兄用過?
佢話好聲過 Black Gate !!! - #17 [kslsfz], 16-02-04 10:29呢隻普通嘢嚟,下面條link話Q太郎重用緊吃奶之力搞緊 Black gate replacement
- #18 [kf14], 16-02-04 10:48DAC 4.1,全机升級blackgate FK电容,audionote快睛电容,audionote 0.1uf純銀交連电容。
最後修改時間: 2016-02-04 10:52:39 - #19 [kf14], 16-02-04 10:49Photo
- #21 [wildismaudio], 16-02-04 17:26快晴電容的確不錯,不過數值太少~最大只有100UF
- 下一頁 (1 of 46)
- 返回 ...
小弟玩The Mentor 2.0
最後修改時間: 2016-02-02 11:26:15