- #32 [hahayanyan], 21-05-16 10:31
- #31 [hahayanyan], 21-05-16 10:10Haha thx... Need to be seem at pc... HaHa
Thxx - #30 [dttmtong], 21-05-16 09:47長長兄,
請問唱盤和唱臂的牌子是否 FFYX?
謝謝你
最後修改時間: 2021-05-16 09:48:04 -
- #29 [長長影子], 21-05-16 02:07其實都冇乜特别,都係大路嘢,但我多數都剩係用嚟 rip 黑膠,宜家都好少用嚟聽碟。
- #28 [hahayanyan], 21-05-15 09:39Hihi long longggggg
That is a very cool China table...
Haha certainly not cheap too
Teach us.. Or inspire us your coupling aNG or decouplig etc.. La... Haha thx
Are u still using optical cartridge?
What is that big clamp and the record Mat is?
What is those big Grey things at the right?
Some sort of antistatic devcce at the left? How's effective it is.. Or something u having it around and why not to use it.. Type. Of things?
Haha
Niceee
Any one have ever try to diy those.. Lets say.. Leather mat, arcylic mat etc?
最後修改時間: 2021-05-15 09:42:53 - #27 [長長影子], 21-05-15 01:12我都想買得起部 Clearaudio + TT2,但我只不過有部 China made air-bearing turntable。
- #26 [kingphilip], 21-05-14 21:49睇黎有啲混亂,反正我個盤轉軸從未拆開過,講真我都想折開換油諸如此類,但一直用佢又轉速順暢就一直無理,反而幾年前個摩打就燒過一邊綫圈換過!
- #25 [hahayanyan], 21-05-14 21:39長長影子 mentioned he is using a China made airbearing table
最後修改時間: 2021-05-14 21:40:38 - #24 [kingphilip], 21-05-14 21:37#23 我系邊post過我用緊 a very interesting China made airbearing things?點解我吾知嘅?定系你誤會咗?
- #23 [hahayanyan], 21-05-14 19:32He is using a very interesting China made airbearing things
He mentioned it at other thread
最後修改時間: 2021-05-14 19:32:40 - #22 [Andy3210], 21-05-14 18:47長長影子
係咪用緊Clearaudio? - #21 [hahayanyan], 21-05-14 13:31Haha..
Thx for sharing
Press start..., 睇下 speed accuracy and wow and fluttering % too
難得難得四十年都仲可以咁
Haha
最後修改時間: 2021-05-14 13:31:19 - #20 [kingphilip], 21-05-14 13:20#19 有趣有趣有趣有趣...
今今日睇到Ching個post所以用你個apps check埋 似乎轉數正常。 - #19 [hahayanyan], 21-05-02 20:16有趣有趣有趣有趣
好難得有機會知道有一個table40年冇service 仲係暢順嘅
Happy to use that app and do a test, and then share those data?
If the wow and flattering is still good... Then really no need to touch it
160mk ii.. Can be as good as 0.08 or even less
However we should not feel anything bad if it is at the range of 0.5... Haha
https://play.google.com/store/apps/details?id=com.AM.AM.RPMSpeed - #18 [kingphilip], 21-05-02 20:11我個Thorens 160 mll 用咗四十年,到而家都未拆過轉盤軸心換油同加油,但轉速都冇問題好順暢,吾知有冇須要折,因為都吾知點折佢出黎
- #17 [BenYC], 21-04-29 20:17如果盤本身的舊油冇法洗去,只可加的話,不如用原廠煩少樣。
最後修改時間: 2021-04-29 20:18:17 - #16 [長長影子], 21-04-29 18:18我嗰個只係普通 cheap 盤,既然發現原廠畀嘅嘅潤滑油有容易風乾及太黏嘅問題,唯有自己另尋解決方案。
- #15 [hahayanyan], 21-04-29 18:06斷估 acoustic solid and Nottingham 經營咗咁多年... 唔會搞錯潤滑油嘅選擇嘅..your best answer should be obtained from those makers..
Haha
揀啱oil係好緊要㗎 - #14 [長長影子], 21-04-29 15:11我用氣浮轉盤,用潤滑油所面對嘅問題有啲唔同,我發現轉軸上嘅潤滑會因為氣浮結構內經常有大量氣流流動而極速揮發(風乾),另外接觸點只係軸嘅最頂端,所以一般低黏度嘅油亦難以依附。 我試過用原廠潤滑油一年內可以完全乾晒,除咗影響轉速外,表面黏力大到抺嗰時足以黐爛張厠紙。 之後我亦試過用其他唔同性質嘅潤滑油嚟做實驗,喺我嘅用途上我試出嚟嘅結果係 gel 類別及矽油類別壽命會相對比較長,宜家我多數都係用 gel 類別,大概一年就要清潔及抺油一次,雖然壽命仍然短過用矽油類別,但用 gel 感覺上潤滑度好啲,我估計對轉軸損耗亦會比較低。
- #13 [hahayanyan], 21-04-29 12:27第一, 你應該傳個電郵給這些製造商問他們意見, 及指引
those 兩個唱盤都應該容易找到他們嘅用戶手冊
例如需要多少時間及用什麼油
最後修改時間: 2021-04-29 12:39:38 - 下一頁 (3 of 4)
- 返回 ...
and the clamp is DIY too ?
haha
last time i rip LP ..........more than 30 yrs ago.......................
haha
最後修改時間: 2021-05-16 10:33:36