- #21 [hahayanyan], 21-05-14 13:31
- #22 [Andy3210], 21-05-14 18:47長長影子
係咪用緊Clearaudio? - #23 [hahayanyan], 21-05-14 19:32He is using a very interesting China made airbearing things
He mentioned it at other thread
最後修改時間: 2021-05-14 19:32:40 -
- #24 [kingphilip], 21-05-14 21:37#23 我系邊post過我用緊 a very interesting China made airbearing things?點解我吾知嘅?定系你誤會咗?
- #25 [hahayanyan], 21-05-14 21:39長長影子 mentioned he is using a China made airbearing table
最後修改時間: 2021-05-14 21:40:38 - #26 [kingphilip], 21-05-14 21:49睇黎有啲混亂,反正我個盤轉軸從未拆開過,講真我都想折開換油諸如此類,但一直用佢又轉速順暢就一直無理,反而幾年前個摩打就燒過一邊綫圈換過!
- #27 [長長影子], 21-05-15 01:12我都想買得起部 Clearaudio + TT2,但我只不過有部 China made air-bearing turntable。
- #28 [hahayanyan], 21-05-15 09:39Hihi long longggggg
That is a very cool China table...
Haha certainly not cheap too
Teach us.. Or inspire us your coupling aNG or decouplig etc.. La... Haha thx
Are u still using optical cartridge?
What is that big clamp and the record Mat is?
What is those big Grey things at the right?
Some sort of antistatic devcce at the left? How's effective it is.. Or something u having it around and why not to use it.. Type. Of things?
Haha
Niceee
Any one have ever try to diy those.. Lets say.. Leather mat, arcylic mat etc?
最後修改時間: 2021-05-15 09:42:53 - #29 [長長影子], 21-05-16 02:07其實都冇乜特别,都係大路嘢,但我多數都剩係用嚟 rip 黑膠,宜家都好少用嚟聽碟。
- #30 [dttmtong], 21-05-16 09:47長長兄,
請問唱盤和唱臂的牌子是否 FFYX?
謝謝你
最後修改時間: 2021-05-16 09:48:04 - #31 [hahayanyan], 21-05-16 10:10Haha thx... Need to be seem at pc... HaHa
Thxx - #32 [hahayanyan], 21-05-16 10:31butyl rubberrrrrrrrrrr noted...........
and the clamp is DIY too ?
haha
last time i rip LP ..........more than 30 yrs ago.......................
haha
最後修改時間: 2021-05-16 10:33:36 - #33 [CS168], 21-05-16 10:39
帶動式唱盤就容易測試,
甩咗條帶,用手轉一下,
正常分半鐘左右先至停,
一粒聲都冇的。 - #34 [hahayanyan], 21-05-16 10:52我有啲朋友有啲tables 狀態好好真係五六分鐘都唔停㗎
- #35 [CS168], 21-05-16 11:00#34.我有啲朋友有啲tables 狀態好好真係五六分鐘都唔停㗎
>>> 嗰粒啤呤同走珠真係勁,低阻力而又做到超暢順。 - #36 [Andy3210], 21-05-16 11:01#27
勁,成座airforce咁 - #37 [hahayanyan], 21-05-16 11:07#35
Sometime.. Some table It may not be good.. Need to further verify the wow and fluttering... If so less friction and also very low wow and fluttering.. Then that is the good oil for that table - #38 [CS168], 21-05-16 11:08#36.
>> 大殺傷力重型武器呀!^^" - #39 [hahayanyan], 21-05-16 11:10#29
I assume u rip the LP into digital...(if i rip any..., it will be only A to A ) haha
What ADC is using? Any particular caution for ensuring a good rip?
I guess some of us.. May love to do the same...
最後修改時間: 2021-05-16 11:23:08 - #40 [長長影子], 21-05-16 17:23"請問唱盤和唱臂的牌子是否 FFYX?"
<- 正是 FFYX。
"and the clamp is DIY too ?"
<- 石墨好難加工,喱個就算我有部小型 CNC 都 DIY 唔到,我用 Weizhi。
"我有啲朋友有啲tables 狀態好好真係五六分鐘都唔停㗎"
<- 我覺得同轉盤重量及動力慣性比較有關係。
"勁,成座airforce咁"
">> 大殺傷力重型武器呀!^^""
<- 但我喱部只算係粗嘢,啲細節位有唔少手尾要靠自己去執,潤滑油嘅問題係其中之一。
"Sometime.. Some table It may not be good.. Need to further verify the wow and fluttering... If so less friction and also very low wow and fluttering.. Then that is the good oil for that table"
<- 喱啲問題係可以用測試碟嚟試。
"What ADC is using? Any particular caution for ensuring a good rip?"
<- 我用 Mytek Brooklyn ADC (MQA-ready) 嚟錄。 RIP LP 好處係錄嗰時喇叭可以唔發聲減少震動,錄之前每隻都要先洗到乾乾淨淨然後逐隻碟跟厚度嚟調校對應嘅 VTA,錄成 file 之後仲可以 corr. 唱頭左右嘅對稱度及 response 同埋執走部份太明顯嘅炒豆聲。 我其實有好多隻白版碟,RIP 咗去嚟播放除咗可以減少隻碟及針嘅損耗外,又可以比 real-time 播放時用更好嘅 DSP 嚟做 phase corr.。 - 下一頁 (2 of 4)
- 返回 ...
Thx for sharing
Press start..., 睇下 speed accuracy and wow and fluttering % too
難得難得四十年都仲可以咁
Haha
最後修改時間: 2021-05-14 13:31:19