I'm using FS688. Great small speakers.

我現在用緊MT1,請教用乜野amp匹配最好?最主要聽人聲,jazz.

原來有咁多巴打都用緊FA喇叭^^
等我update下個list先

1. angelfish51 FS-688
2. mcm FS-78s
3. jimmison FS-68se
4. hiendboy FS-788
5. prodip FS-788
6. simcity FS-78s
7. ALEXANDER FS-78
8. fungfung334 MT1
9. hotdogbl MT1
10. SmallB FS-78se
11. DAC FS-68s
12. danielccn FS-78se
13. alman FS-78se
14. Ray939 MT1

corrected!

1. angelfish51 FS-688
2. mcm FS-78s
3. jimmison FS-68se
4. hiendboy FS-788
5. prodip FS-788
6. simcity FS-78s
7. ALEXANDER FS-78
8. fungfung334 MT1
9. hotdogbl MT1
10. SmallB FS-78se
11. DAC FS-68s
12. danielccn FS-78se
13. alman FS-688
14. Ray939 MT1

many bros using FS-78/788 series, is its bass tight? i'm using FS-688, after using FDII spk std, its bass is improved but still not tight enough. any sharing on the bass of FA spk?

hi Ray939,

i'd listened MF A5 driving FS-78se quite well, but not have exp on MT1. some ppl said that FA spk are quite hard to push, but i feel that Dyna spk is much harder to push than FA. any comments?

could u shared your run-in time for your FA spk, i have been running-in my 688 for 100-200hrs, but still feel it is not fully run-in. thanks.

Dear angelfish51...you made a mistake,my speaker is FS-888.

Dear angelfish51.....為什麼唔count我呀!!^-^

simcity, 我的setup差唔多同您一樣, 除cd player外. 您現在用緊什麼接線??

我都用緊688. 但暫時覺得部amp唔多夠力推...諗住下一次就換amp..

Ray939:我用緊Sonic frontiers power2 ぇ嵿霖T1,
之前曾用300B,現在power2較全面發揮到MT1,聽人聲
或爆棚野同樣"惦"!

＞推MT1...

補充:SF-power2係膽機,行緊8枝KT88每邊100瓦.

Hi erveybody
I use Linn (pre/power) to drive FS-68. It is great
but I think 80W per channel is not enough power to drive the speaker when play classic. -_-.

sorry BandH, mcm,
bcoz i updated the list at late night that i'm too sleepy, made mistakes, sry, sry

corrected list

1. angelfish51 FS-688
2. mcm FS-888
3. BandH FS-78s
4. jimmison FS-68se
5. hiendboy FS-788
6. prodip FS-788
7. simcity FS-78s
8. ALEXANDER FS-78
9. fungfung334 MT1
10. hotdogbl MT1
11. SmallB FS-78se
12. DAC FS-68s
13. danielccn FS-78se
14. alman FS-688
15. Ray939 MT1

updated list

1. angelfish51 FS-688
2. mcm FS-888
3. BandH FS-78s
4. jimmison FS-68se
5. hiendboy FS-788
6. prodip FS-788
7. simcity FS-78s
8. ALEXANDER FS-78
9. fungfung334 MT1
10. hotdogbl MT1
11. SmallB FS-78se
12. DAC FS-68s
13. danielccn FS-78se
14. alman FS-688
15. Ray939 MT1
16. jrjr FS-688
17. felix FS-68

updated list

1. angelfish51 FS-688
2. mcm FS-888
3. BandH FS-78s
4. jimmison FS-68se
5. hiendboy FS-788
6. prodip FS-788
7. simcity FS-78s
8. ALEXANDER FS-78
9. fungfung334 MT1
10. hotdogbl MT1
11. SmallB FS-78se
12. DAC FS-68s
13. danielccn FS-78se
14. alman FS-688
15. Ray939 MT1
16. jrjr FS-688
17. felix FS-68
18. euro FS78s

Hi BandH,

In fact, I have sold the 78s by now. During that period, I have been using AQ clear3, extreme clear and sterling SE with audionote jumper and later on using taralab prime 1000 for by wire. Interconnect is AQ anaconda and straight wire cresendo balance.

What is your CD player and do you use an aftermarket jumper for the 78s?

1. angelfish51 FS-688
2. mcm FS-888
3. BandH FS-78s
4. jimmison FS-68se
5. hiendboy FS-788
6. prodip FS-788
7. simcity FS-78s
8. ALEXANDER FS-78
9. fungfung334 MT1
10. hotdogbl MT1
11. SmallB FS-78se
12. DAC FS-68s
13. danielccn FS-78se
14. alman FS-688
15. Ray939 MT1
16. jrjr FS-688
17. felix FS-68
18. euro FS78s
19. lofai13 FS68SE

My MT-1, unliked the current one, being used the Cardas high-purity copper binding post, So I put the Cardas Hexlink Golden 5C speaker cables (bi-wire) between the power amp and the speakers.All my inter-connects are Cardas Golden Reference.