- #186 [welborne], 14-09-10 15:07The one on the right, is what I want to challenge myself with
- #187 [welborne], 14-09-10 15:09The Lampizator oval that I am going to use
- #188 [welborne], 14-09-10 15:12The 13cm tweeter i will use again. This is the main component that i miss the most
-
- #189 [skto], 14-09-10 20:55Welbrone 兄,
我對障板, 駁咗對ESS 高音.
好似又幾夾, 高音, 又另一個天地.
唔覺話有速度問題.
現在全面好多. - #190 [kmc0907], 14-09-11 01:26師兄我都係行电分推ESS,真係無得頂.
- #191 [yt], 14-09-11 05:01偷偷地,靜雞雞,參一腳先。
Trio15 TB Bamboo Pair Open Baffle Speakers
最後修改時間: 2014-09-11 05:02:24 - #192 [geeboo], 14-09-11 09:00To sir,
Could U specify the dimension & brand of diff. units in your baffle as shown installed?
最後修改時間: 2014-09-11 09:09:12 - #193 [yt], 14-09-11 23:28脫,,,,,,,,脫,,,,,,,脫,,,,,,,,,,
- #194 [cat2013], 14-09-12 20:33睇見都流口水啦!
真的"有無限的錢,玩無限的HIFI" 。 。 。 - #195 [welborne], 15-01-08 01:45Skto sir,
你對障板越玩越大!都係我對SABA障板毒害了你:) - #196 [Go4WAR], 15-01-08 02:57我都玩緊障板^^
- #197 [welborne], 15-01-09 02:44Go4war hing, 都可以「算」係障板,但唔係open baffle 咯!
Just kidding :) - #198 [welborne], 15-01-09 14:20玩了Bastanis 障板連18" ripol 超低近四年後的今天,再次生起重做vintage alnico baffle的念頭,再次Lampizator
- #199 [skto], 15-01-09 14:37To sir,
Could U specify the dimension & brand of diff. units in your baffle as shown installed?
___________________________________________________________________________
Geeboo 兄,
SORRY MISS 咗呢個信息, 會UPDATE .
skto - #200 [skto], 15-01-09 14:38upload 唔倒相片??
- #201 [skto], 15-01-09 14:39好似又得
- #202 [welborne], 15-01-09 14:55Once upon the time....
- #203 [C680], 15-01-09 18:58Welborne 兄,想請教。小弟正在盤算設計一對 OB, 想用12" Coaxial 單元,但查閱好多品牌有以下spec的,大都是Pro-Sound用單元比較多。有沒有些用於Pro-Audio 或HIFI 的單元會有大約這個Spec? 可否指點下!
用到12"原因是低頻量在OB 設計都是一個大難題。除非板面有無限大!但實際當然唔可能。所以想用大口徑的高效率單元來補償一些低頻量 。而用大口徑另一個主要的原因是由於體積大,由magnet中心點到紙盤面邊緣矩離有足夠長度比高頻伸展,以至高頻及低頻相位差能夠盡量小。相位在高,中,低頻實在太難太難做得好。Coaxial 或 Triaxial 已經相信係能使相位差最相近的設計.如有錯誤,請指教指教!
Efficiency > 96dB 以上
Freq.Res : 45-20K
Size ; woofer 12" , Tweeter horn diaphragm 約 1-1.5"
Qts : > 0.6 以上
Magnet : Neodymium - #204 [geeboo], 15-01-10 12:11I will use Isophon P38 15" woofer in Lampizator style - but not yet assemble.
To sir= As from my limited kindergarten knowledge, the sound of 3 way speaker lies heavily in the construction (incl. material) of crossover, kindly show me your crossover pls ?
最後修改時間: 2015-01-10 12:23:50 - #205 [geeboo], 15-01-10 12:22For those whom are interested in DIY, I find Taobao provides a wide variety of Thick & raw wood, like for example this one.
This would make your beloved OP much more class.
http://tw.taobao.com/item/38740544616.htm?fromSite=main
最後修改時間: 2015-01-10 12:24:21 - 下一頁 (10.25 of 130)
- 返回 ...