- #18 [tcflex], 20-04-10 23:12
- #17 [fotheringay], 20-04-10 20:12被塵垢埋了.....
Please don't feel getting offended but I must say has the cart ever been cleaned?
Regular brushing would mostly be adequate as it would allow to use less any cleaning solution. The solution may have detrimental result(being hardened) with the damping material, not an ideal situation.
- #16 [cshingyau], 20-04-10 17:51洗咗個針頭先啦， 用75度火酒 都得㗎啦。 但睇落好似冇咗個針頭喎。
-
- #15 [BenYC], 20-04-10 16:06未必。可能很小，被塵垢埋了。反正用針水掃幾吓是舉手之勞。
- #14 [cornercube], 20-04-10 14:41粒 鑽石 唔見咗啦.
- #13 [BenYC], 20-04-10 14:39洗乾淨枝針先。再試吓。
- #12 [cshingyau], 20-04-10 14:09寄返原廠日本整啦 但係會好貴
- #11 [ilock], 20-04-09 23:33香港唔知有冇得整
外國就有好多 - #10 [tcflex], 20-04-09 23:27好似係，唔知有冇得整
- #9 [ilock], 20-04-09 23:00唔見咗個針頭？
有冇放大鏡可以睇清楚啲? - #8 [cornercube], 20-04-09 22:49睇唔到 粒 鑽石
i.e.
粒 鑽石 唔見咗? - #7 [tcflex], 20-04-09 22:41Re
- #6 [tcflex], 20-04-09 22:41Re
- #5 [tcflex], 20-04-09 22:40好似針頭有問題
最後修改時間: 2020-04-09 22:41:07 - #4 [Vinylfriend], 20-04-09 15:49去買一個專門清潔唱針的東西(類似鼻涕膠)清潔一吓，看看有沒改善啦！
- #3 [cornercube], 20-04-09 12:53
- #2 [Vinylfriend], 20-04-09 08:55睇唔到針尖喎！有冇汚漕嘢痴住針尖？
- #1 [tcflex], 20-04-08 22:46我的ZXY 頭拆聲，是不是針頭有損，煩請師兄看看
- 返回 ...
ZXY Omega S
最後修改時間: 2020-04-10 23:13:51