- #100 [phil.ng], 22-08-07 18:27樓主可看看其他師兄用什麼前夾Bryston.....學習之路
- #99 [terencengan], 22-08-07 18:09百零尺
有興趣可互相家訪研究下 - #98 [sevenseal], 22-08-07 17:51#94 Ching 空間闊落嗎?
-
- #97 [phil.ng], 22-08-07 17:144B xlr 超奇
- #96 [phil.ng], 22-08-07 17:1314 正常好多丶沒有像 4 B丶奇奇怪怪
- #95 [terencengan], 22-08-07 17:07不过我用12寸单元
- #94 [terencengan], 22-08-07 16:58我用緊14B3十旦前
完全可寬鬆吖
用xlr
最後修改時間: 2022-08-07 16:59:39 - #93 [BB1668], 22-08-07 14:07喇叭墊, 有咩推介?
Soundcare - #92 [raymak462], 22-08-07 13:57雲石一般會嚴重干硬化
- #91 [tonywong], 22-08-07 10:41喇叭墊, 有咩推介?
現在用linn skeet 加雲石
喇叭50KG - #90 [sevenseal], 22-08-07 10:39#83 喇叭用緊isoacoustic承托
- #89 [phil.ng], 22-08-07 10:15如果 4B3 真係吾 lively, 夾膽前就更可能過柔
又如 in/out impedance (前後級)吾夾丶又可能更差
我前可set output ohm, 去match 後級丶真係好大分別 - #88 [phil.ng], 22-08-07 09:58所以丶其中一問題可能在 Bryston 4B3
- #87 [phil.ng], 22-08-07 09:574B3....吾夠生氣(爽)丶音場吾夠大丶當年同 Krell 鬥丶輸好好多
"CONS: Excruciatingly long break-in; not as lively or dimensional as some of the audiophile competition; balanced input seems slightly compromised."
Full review.... https://taww.co/post/189658998642/bryston-4b-cubed-review - #86 [phil.ng], 22-08-07 09:45Bryston 與大部分 amp 一樣(包括 av amp), 直入牆丶入牆呀丶否則聲音焗丶吾起
中古時玩丶已有此感受
"One thing was clear though - the Bryston perferred being plugged directly into the wall vs. my Audience ar6 TSSOX conditioner. Even though the Audience is designed specifically with low impedance and high current delivery in mind, the Bryston felt constrained running through it - give it as direct a connection to the wall juice as possible." - #85 [phil.ng], 22-08-07 09:39Bryston XLR......奇怪設計一一一本來xlr 會比 rca 好丶但吾知佢搞什麼丶RCA 比較好丶怎做 concert 呀丶要行幾百尺!?XLR 只是人有我有.
多年前有人話丶Bryston 是poor man’s Krell...而家開始明
"RCA input to sound fractionally more open and dynamic, and equally as quiet. Normally balanced operation affords you these qualities but I heard no such advantage with the 4B3. One clue is in the specs, which show drastically different input impedances for the balanced terminals - 30kΩ for positive, and a shockingly low 6kΩ for negative. This seems to indicate that it’s not a differential/complementary input circuit like you’d find with e.g. Ayre or Pass, and I’d imagine this lack of symmetry compromises CMRR and some other benefits of balanced operation. I inquired with Bryston about how the circuit was implemented but didn’t get a response." - #84 [phil.ng], 22-08-07 09:31Bryston 夾前一一一一夾錯丶吾爽
"4B3’s RCA input impedance is on the low-ish side (30kΩ), not the 100k+ that many tube pres seem to favor, so something to keep in mind when matching. The Soulshine did just fine, others may not." - #83 [Edgware], 22-08-07 03:38樓主:
想提一事。喇叭釘腳及墊可以影響全頻的擴散,空氣感、音場、高低申延及各種樂器及人聲的尾音等。
尤其樓主的地板是磗地,可能會有機會係硬材料碰硬材料,個人經驗會手撞聲,聲音不耐聽,某一頻段特別大聲、好亂。
建議樓主換上上述師兄推介的釘腳。 - #82 [phil.ng], 22-08-06 15:29
- #81 [benjamin61], 22-08-06 15:02#78....................剛 33 師兄放三件, sevenseal ching 可以問他.
- 下一頁 (3 of 7)
- 返回 ...