- #1 [Ringol1003], 16-07-09 01:02
- #2 [Zuiko], 16-07-09 18:42我嘅新玩具
- #3 [Zuiko], 16-07-09 18:43Lenco GL59
-
- #4 [Zuiko], 16-07-09 18:44好重!
- #5 [Oldsoulvinyl], 16-07-10 03:29我個仔^^
- #6 [Danz], 16-07-10 10:55I started my Lenco journey 3 years ago and my TT section has not stop evolving ever since.
最後修改時間: 2016-07-10 10:56:20 - #7 [Danz], 16-07-10 10:59Origin Live Encounter Tonearm with custom made external armpod
- #8 [Danz], 16-07-10 11:08I giveup my Nottingham TT over this vintage cheapo TT.
- #9 [Danz], 16-07-10 11:20Bought a handsome plinth off eBay
- #10 [Danz], 16-07-10 11:21A cheapo Hadcock tonearm was introduced
- #11 [Danz], 16-07-10 11:23Heavily modify it at spare time. Double platter was introduced in the meantime.
- #12 [Danz], 16-07-10 11:242nd tonearm for spu-a
- #13 [Danz], 16-07-10 11:27It is so much fun to swap tonearms, and this is my Schick tonearm for spu-g. Tons of fun with my Lenco 70^-^
- #14 [fotheringay], 16-07-10 12:20Originally from Hong Kong but now residing in the UK and I hope it's OK if I make some input here.
I started off with a standard GL75 with an extra acrylic platter from a dead Pink Triangle deck and a Rega RB250 arm.
最後修改時間: 2016-07-10 12:24:16 - #15 [fotheringay], 16-07-10 12:22I then made a solid oak plinth.
- #16 [fotheringay], 16-07-10 12:27Back to basic plinth and a Rega RB200 in order to change the headshell.
- #17 [fotheringay], 16-07-10 12:32In order to put more mass the deck I cut some layers of plywood adding more weight to the plinth and also a DIY extra long arm.
最後修改時間: 2016-07-10 12:34:24 - #18 [fotheringay], 16-07-10 12:35Found a piece of slate from a car boot sale for £1 so I cut it to accommodate the GL75 and modify the extra long arm.
最後修改時間: 2016-07-10 12:36:43 - #19 [fotheringay], 16-07-10 12:40
I made an ebony wood haedshell to use with heavy MC carts eg. Dynavector and Denon DL-102.
At the same time I also make an extra low mass arm for the ACUTEX Low Mass MM cart which allows me to track at 0.9g.
最後修改時間: 2016-07-10 12:48:26 - #20 [fotheringay], 16-07-10 13:00
The DIY Low Mass is then replaced by a Grace 707 arm.
With the acrylic platter light can be transmitted and looks really nice.
最後修改時間: 2016-07-10 13:04:49 - 下一頁 (1 of 17)
- 返回 ...
最後修改時間: 2016-07-09 01:10:07