- #1800 [wklie], 26-02-13 13:33
- #1799 [wklie], 26-02-10 10:19Roon users please do NOT update Roon to 2.58, due to an issue that has affected some users (including non-Lumin setups as well).
- #1798 [wklie], 26-02-06 15:27音響技術 2月號 533期
封面專題
LUMIN X2 全新旗艦串流播放器
• 祖兒、鍾啟源、大草 -
- #1797 [wklie], 26-02-03 10:02#1796:
如果您決定從不使用Lumin的內建DAC或 analog 輸出,那麼購買U2並利用其 Dedicated USB output 輸出端口連接外部DAC會更為合理。若您有兩套系統需連接兩台DAC,或您的DAC不支援DSD256/DSD512格式,抑或僅想偶爾體驗不同的音色風格,則P1 MINI或T3X具備更廣泛的適用性。
用料相似,但如果您不需要內部 DAC,U2 的電子元件較少(因此引入噪音的機會更低)。U2 擁有 Dedicated USB output 輸出,而 P1 MINI 或 T3X 中不存在此功能。
最後修改時間: 2026-02-03 10:12:47 - #1796 [gerrard], 26-02-03 01:47wklie兄
小弟已經備有不錯的DAC,考慮緊應入手T3X用USB輸出好,還是直接入手U2 transport好呢?兩者用料上有何分別?
純計USB輸出, 兩者的質素會有很大分別嗎? U2個USB輸出效果會比T3X的好很多?
謝謝 - #1795 [wklie], 26-01-31 00:07#1794: BNC 75 ohm
- #1794 [musicdna], 26-01-30 14:54請問lumin S1 bnc out 是 50 定 75 歐姆 ?
最後修改時間: 2026-01-30 14:54:55 - #1793 [zenkihui], 26-01-19 14:11感謝wklie兄
我會慢慢試下.
剛收貨,準備安裝
- #1792 [wklie], 26-01-19 09:37#1791:
1. 若音量過大,請調低 Max Volume % 設定;若音量適中,則維持100%設定。此數值是根據您的 E-4000 voltage sensitivity 計算得出。
3. 兩種設定皆可適用。由於實際效果取決於amp硬體特性,建議您逐一測試兩種模式,仔細聆聽是否存在音質差異——即便差異可能微乎其微。 - #1791 [zenkihui], 26-01-16 19:111: 請問output level set為low , 是否仍要將max volume 收到60%?
(accuphase cd機既xlr / rca 都係一樣2.5rmvs )
2: 呢個明白,thanks
3: 請問xlr pin腳呢個問題, 我見lumin apps 介面可以揀相位,我應該係lumin (模擬輸出時)揀反相呢個option定係由accuphase amp果邊set 返phase 反相會好d?
如果by pass左金仔既前級用lumin 作為前級,輸入到金仔既 main in 金仔本身可以揀返1地2+ 3- 呢個input setting. 呢樣反而冇問題.
thanks for reply.
最後修改時間: 2026-01-16 19:12:36 - #1790 [wklie], 26-01-16 17:53#1789:
針對 Accuphase:請將 Lumin 的 Analog Output Level 設為 Low。若遇到「增益過高」的問題(即在擴大機大部分音量範圍內聲音過大),使用 XLR 連接時請將 Lumin 的 Max Volume % 設定為60%。
若選擇 bypass Accuphase 的前級部分,改用 MAIN IN 連接時,則應將Lumin Max Volume % 設為95%。開始播放前務必先將Lumin音量調至極低值——請使用Lumin app 或任何網路音樂應用程式來控制音量,而非透過Accuphase的音量旋鈕。
此外,由於 Lumin 採用 XLR 'pin 2 hot' 標準,而 Accuphase 的 XLR 接口為 'pin 2 cold',您可相應地調整 Accuphase的 PHASE 設定。 - #1789 [zenkihui], 26-01-16 13:53我用緊accuphase e-4000
thanks. - #1788 [wklie], 26-01-15 09:32#1787:
哪個型號合併機? - #1787 [zenkihui], 26-01-14 18:37wklie兄
我應該會揀t3x ,因為更加純粹.
2rmv 應該夠用.我本身有合併機.
thanks for reply - #1786 [wklie], 26-01-14 11:47#1785:
1. 音色上取向應極其相似,因為 DAC 輸出電路, femtoclock 是相同的。請注意,在這兩款型號中,P1 Mini支援 analog 和 digital 輸入,並配備遙控器。 您甚至可以透過電視連接光纖線或HDMI線(ARC),這樣就能透過您的 HiFi 系統聆聽電視聲音(例如Netflix)。 使用雙聲道HiFi系統來聆聽音樂影片或演唱會雙聲道 track,其效果遠勝於一般以電影為導向的 AV amp。
2.
T3X / T3 / T2 / D3 / X-series / P-series:
Analog Output Level Normal: XLR 6V rms, RCA 3V rms
Analog Output Level Low: XLR 2V rms, RCA 1V rms
最後修改時間: 2026-01-14 12:02:55 - #1785 [zenkihui], 26-01-13 20:43wklie兄
請問p1 mini 同t3x 音色上取向有明顯分別嗎?
另外想請問,模擬xlr輸出正常係6vms,如果係低gain大約係幾多vms?
thanks for reply. - #1784 [wklie], 26-01-08 20:48AI translation:
在Roon論壇上,一位 Lumin X2 用戶分享了他在使用200小時後的第一印象 (vs X1):
我在2025年12月31日收到 X2。開機後的初步印象是,儘管外觀設計相同,但確實有些不同。我立刻注意到音樂更(organic) 富有機性,擁有多層次寬廣而深邃的音場,沒有刺耳的聲響,但我決定在煲機完成後再寫心得。因此從2025年12月31日至今,它持續播放著音樂。當我不在家時,我會關閉主動式監聽喇叭。我發現經過這八天約200小時的使用,聲音特質變化很大,現在變得更加自然、音場更寬廣深邃且層次豐富。
如果用一句話總結,我會說:「你會忘記正在播放的系統,隨著音樂流動,當音樂停止時,你才會意識到自己剛才正在聆聽Lumin X2」如同魔法般。它的聲音具有情感連結。我對購買Lumin X2完全感到滿意。
---
Original:
At Roon forum a Lumin X2 user shared his first impressions after 200 hours (compared to X1):
"
I received X2 on 31/12/2025. My initial impression after powering it was that yes it is something different even though in same outer design. I immediately noticed that the music was more organic, having multi layered wide and deep sound stage, no sound glare, but I decided that I will write after doing burn in. So from 31/12/2025 to till date it is continuously playing music. When I am not at home I switch off my active monitors. I noticed that during last eight days approx 200 hours, the sound signature changed a lot and now it is more organic, wider- deeper- multi layers soundstage.
In one line if you tell me to summarize, I can say that "forget which system is playing you will flow with music and when it will stop playing you will realize that you were listening Lumin X2" like magic. Its sound has emotional attachment. I am totally satisfied with the purchase of Lumin X2.
" - #1783 [上水小強], 25-12-19 10:01Thanks!
- #1782 [wklie], 25-12-18 23:13#1780, 1781:
Please power cycle the Lumin, upgrade Lumin firmware to 21.1b, then follow the instructions in post #1750
最後修改時間: 2025-12-18 23:14:30 - #1781 [上水小強], 25-12-17 17:42無名腫毒!又搞掂咗

- 下一頁 (1 of 90)
- 返回 ...

We're probably the first manufacturer to release it.