- #1724 [wklie], 25-05-21 15:13
- #1723 [Hkhifier], 25-05-18 21:03Lumin U1 可以經Tidal App 直接選歌?還是一定要經Lumin App 才可播Tidal?
最後修改時間: 2025-05-18 21:04:07 - #1722 [chillistening], 25-05-07 12:13Play music through the Qobuz connect and Lumin U2 mini successfully. Thank you Lumin team.
-
- #1721 [wklie], 25-05-06 12:09(僅供參考,由於香港屬於非 Qobuz 支援地區,若無外國(如美國)信用卡,註冊 Qobuz 帳戶極為困難。)
Lumin X1、P系列、U系列、T3X、T3、T2及D3型號於 Firmware 版本19中支援Qobuz Connect功能。若您的Lumin設備已具備Tidal Connect,升級此 Firmware 後將同步獲得Qobuz Connect功能。
需注意:此功能須待Qobuz app 未來更新至 Version 9 版方能啟用。現行Qobuz 8.6.x及更早版本均不支援Qobuz Connect。即使您已安裝正確版本,仍需等待Qobuz正式全球發布並全面開放此功能。
請密切關注Qobuz官方公告。
Lumin 的 Qobuz Connect與Tidal Connect 皆支援無縫播放 gapless playback 技術。
我們另針對緩衝機制與Qobuz Connect設備搜尋進行專屬強化,理論上在Qobuz app 中應能比競品更易偵測到Lumin設備。
若仍無法搜尋到Qobuz Connect設備,請依此疑難排解指南操作:
【設備相容性確認】
- 確認您的Lumin型號符合Qobuz Connect要求:X1、P系列、U系列、T3X、T3、T2或D3
- 確認Lumin Firmware 版本為19或更新
- 確認已於最新版Lumin app 中啟用Qobuz Connect設定
- 確認Qobuz app 為9.0或更新版本(8.6.x及之前版本不支援此功能)
【Qobuz app 端操作】
- 關閉防火牆(特別是桌面端)
- 停用VPN(Apple系統需解除安裝所有VPN apps,不僅停用)
- Apple系統需關閉「限制IP地址追蹤」功能
- 授予Qobuz app 所有必要權限(Apple系統尤需開啟「本地網絡」權限)
- 強制關閉Qobuz app(Android系統需點選「強制停止」)
- 開啟飛航模式(建議首選)或關閉WiFi
- 關閉飛航模式並重新啟用WiFi
- 等待WiFi連線恢復
- 重新啟動Qobuz app
【Lumin app 端操作】
- 若遇設備搜尋問題,請先關閉Lumin Streaming(AirPlay)與Tidal Connect功能
- 關閉Qobuz Connect功能,等待數秒後重新啟用 Qobuz Connect
- 若仍無效,等待一分鐘後對Lumin硬體進行電源重啟
- 若所有方法均失效,請重新啟用Lumin串流(AirPlay)與Tidal Connect。透過iOS的AirPlay功能與Tidal應用程式-(需付費帳戶)確認您的網絡基礎架構支援這些設備搜尋協定
- 若擁有多台Lumin設備,建議將設備名稱修改為不同識別名稱
--
(FYI only, since it is very difficult to join Qobuz in Hong Kong as a non-supported region without a foreign e.g. USA credit card.)
Lumin X1 P-series U-series T3X T3 T2 D3 support Qobuz Connect in Firmware 19. If your Lumin unit has Tidal Connect, it will have Qobuz Connect feature after this firmware update.
However, this is not usable until Qobuz app is updated to version 9 in the future to support this feature. Qobuz app 8.6.x and before does NOT support Qobuz Connect. Even if you have the correct version, you may still need to wait for this feature to be globally released by Qobuz and enabled for everyone.
Please wait for official announcement from Qobuz.
Lumin Qobuz Connect plays gapless as Lumin Tidal Connect does.
We also have proprietary enhancements for additional buffering, as well as Qobuz Connect discovery, so it should hopefully be easier to discover Lumin in Qobuz app than competing devices.
Still, if you have trouble discovering Qobuz Connect device, please follow this troubleshooting guide to Qobuz Connect Discovery.
- Make sure you have a required Lumin model for Qobuz Connect: X1 P-series U-series T3X T3 T2 D3
- Make sure you're running Lumin Firmware 19 or later
- Make sure Qobuz Connect setting is turned on in Lumin app (with the latest Lumin app version)
- Make sure your Qobuz app is version 9 or later. Qobuz app 8.6.x and before does NOT support Qobuz Connect.
On Qobuz app device:
- Disable Firewall, especially on desktop
- Disable VPN. On Apple systems, uninstall all VPN apps (not only disable)
- On Apple systems, disable Limit IP Address Tracking
- Grant all permissions required by Qobuz app, especially Local Network on Apple systems
- Swipe away Qobuz app
- On Android, then Force Stop Qobuz app
- Go into Flight mode (preferred), or turn off WiFi
- Exit from Flight mode, and resume WiFi
- Wait for WiFi connection
- Launch Qobuz app
On Lumin app:
- If you are having Qobuz Connect discovery trouble, turn off Lumin Streaming (AirPlay) and Tidal Connect.
- Turn off Qobuz Connect, wait for a few seconds, then turn it back on
- If it still doesn't work, wait for a minute, then power cycle the Lumin hardware
- If all else fails, re-enable Lumin Streaming (AirPlay) and Tidal Connect. Check that your network infrastructure supports these discovery protocols using iOS AirPlay feature, and Tidal app (requires a paid Tidal account).
- Especially if you have multiple Lumin devices, rename the Lumin device(s) to something different
最後修改時間: 2025-05-06 12:22:12 - #1720 [kelvinhin], 25-03-24 23:04原來近年嘅 Samsung 電視都支援 USB Audio,用 USB 連接 M8 同 P1 就正常開到聲,音質似乎仲好咗。
- #1719 [wklie], 25-03-11 15:21HDMI ARC 的測試中,我們使用了幾個品牌的電視,包括三星電視。
電視必須設置為輸出立體聲 PCM(通常為 48kHz),而不是 Dolby、DTS 或 bitstream 位流。 - #1718 [kelvinhin], 25-03-09 15:43Hi wklie 兄,我已經買咗 P1,直推 ATC SCM20ASL Pro 對其音質十分滿意,但我發現佢嘅 HDMI ARC 功能同 Samsung M8 (2022) 顯示器好似有啲相容性問題,播放電視輸出嘅聲音時會不時出現類似炒豆聲,有時從冇聲到有聲時更會出現爆音。我使用隻 mon 跟嚟嘅 Micro HDMI 轉 HDMI 線,而我之前用依個組合喺另一部串流機駁 HDMI ARC 並冇問題。我喺 Roon 嘅 forum 見到你話有個 beta firmware 可以讓 P1 支援用電視遙控嚟控制音量,我可以試吓依個 firmware 會否解決依個問題嗎?
最後修改時間: 2025-03-09 15:43:53 - #1717 [wklie], 25-03-03 14:39P1: Lundahl output transformers in DAC analog output sage, 2 toroidal transformers in power supply
P1 Mini: 1 toroidal transformer in power supply - #1716 [tom55], 25-03-03 14:20兩部都是用兩粒ESS Sabre ES9028PRO DAC chips, 但P1加用 Lundahl output transformers
- #1715 [kelvinhin], 25-03-02 11:49噚日試咗 P1 直入後級嘅表現,講真係明顯好聲過 P1 Mini,P1 聲音比 P1 Mini 實淨、凝聚好多。雖然 P1 冇得直接用 KKBOX,但因為我只係用 Tidal,所以問題唔大。我應該都會決定買 P1。
- #1714 [wklie], 25-02-18 00:40Recommend P1 Mini with the best cost / performance. Note that P1 Mini supports KKBOX, P1 does not.
P1 has Lundahl output transformers in analog output stage, giving a smoother and more "analog" sound quality.
最後修改時間: 2025-02-18 00:42:13 - #1713 [kelvinhin], 25-02-15 16:09請問香港邊度可以一次過試晒 P1 同 P1 Mini? 想了解吓兩者聲音上嘅差別。
- #1712 [wklie], 24-12-10 15:28Lumin 十二週年 Firmware 18.1 支援與 Plāys with Audirvāna 功能。
它將逐步推出至不同型號,包括我們自 2012 年 12 月推出的最早型號。
有興趣三個月免費試用 Audirvāna 的 Lumin 用戶,請發送電子郵件至 info@luminmusic.com,郵件主旨為「Request Audirvana trial code」, 並註明您的 Lumin 型號 。
最後修改時間: 2024-12-10 15:29:57 - #1711 [wklie], 24-11-26 15:07我們的客戶群主要收聽 Lossless 無損音樂,因此對藍牙(有損壓縮)的需求較低。對於Lumin未原生支援的音源(例如 YouTube),iOS用戶可使用AirPlay,Android用戶則可使用 BubbleUPnP Audio Cast(付費 app)。
- #1710 [Tong889], 24-11-24 13:19唔明為何Lumin唔加埋藍牙功能
- #1709 [wklie], 24-11-20 14:46KKBOX 於 2024/11/27 00:00-03:00(台灣時間,GMT+8)服務將暫時中斷執行雲作業,完成後服務便會恢復。
- #1708 [wklie], 24-11-20 14:43#1707: Please send your L2 question to info@luminmusic.com so our support and L2 team can look at it.
最後修改時間: 2024-11-20 14:43:27 - #1707 [Eric301], 24-11-19 09:53wklie兄,
I am user of L2 Music Server and recently I have found unable to transfer files from my computer to the server through my home network. I have seen on my computer screen that the name of the device is "Lumin-L2-Music" while the device name is Lumin L2 Music Server. I am not sure if this is the reason. However, I am not sure how can make the name aligned. Any advice or suggestion? - #1706 [wklie], 24-10-25 10:27Lumin models that support KKBOX: U2 / U2MINI / P1MINI / T3 / D3
QQ音樂: 許多曲目僅限於中國內地播放, 但有些曲目可以在香港播放。 - #1705 [chillistening], 24-10-25 10:18wklie兄有列出支援機款
- 下一頁 (1 of 87)
- 返回 ...
Lumin U-series / P-series / X1 / T3X / T3 / T2 / D3 support Tidal Connect and Qobuz Connect for use with Tidal app and Qobuz app respectively for playback to Lumin hardware
Alternatively, all Lumin streamers support the use of Lumin app to play Tidal and Qobuz. (Some models also support KKBOX).
最後修改時間: 2025-05-21 15:14:57