- #1 [ericsiu], 11-11-11 22:57
- #2 [ericsiu], 11-11-13 23:23那個idler wheel跟GL75是一樣的.
有無師兄可出售 ? - #3 [chinaimamn], 11-11-13 23:25Have you tried ebay?
-
- #4 [ericsiu], 11-11-13 23:45Hello chinaimamn, thanks for suggestion.
The price was quite expensive with shipping cost, and it is hard to guarantee the condition. - #5 [ericsiu], 11-11-13 23:46so it would be great if the friends here can help.
- #6 [chinaimamn], 11-11-13 23:52Have you tried to look into if you can repair it yourself?
If you go to this site:http://www.lencoheaven.net/
you will find very useful information.
My DIY Lenco. - #7 [ericsiu], 11-11-14 00:02Yes, lencoheaven is a great forum.
I learn from there that the noise issue of plastic idler wheel, most users would change it with the metal one, i.e the one from GL75 - #8 [ericsiu], 11-11-14 00:12BTW, your tonarms are interesting. DIY?
- #9 [chinaimamn], 11-11-14 00:21Yes, my second run.
Here is the first one. - #10 [ericsiu], 11-11-14 00:23it's really creative..
especial the tonearm supporting.. haha.. - #11 [chinaimamn], 11-11-14 00:30ha..ha..ha..
Have you seen anyone using old film to support the VTA base?
You can't get any more analogue sound than this, can you?
最後修改時間: 2011-11-14 00:33:40 - #12 [chinaimamn], 11-11-14 00:33Or you just couldn't complain that you need more substance(so called poison by HK audiophiles) than this as adding a insulin syringe to the tonearm.
- #13 [fotheringay], 14-08-01 05:45Update with my DIY Lenco's..
最後修改時間: 2014-08-01 05:58:11 - #14 [welborne], 14-08-01 12:06Hi, can you share how to post multiple pictures in one post?
- #15 [fotheringay], 14-08-02 06:09Hi welborne,
I presume you would have uploaded your pictures to one of those online pictures hosts sites like flickr, pbase, photobucket etc. My way of doing is to that when you post a message with your first picture attached to the message you go straight to 修改 feature. This allows you to have 15 minutes opportunity to amke any corrections with your original message.
Once the interface of "修改主旨及內容" appears you could do correction, addition or extra url links for your pictures/videos.
As seen from the picture all you need to do is to type [img]xxxxxxxxx[/img] and copy and paste the url link from your picture host between them.
I use flickr and when I want to post any numbers of picture I just choose them and the sizes of them by right click the pictures. It will show "Copy Image Location" and all you need to do is to click it and paste. as simple as that. - #16 [hahayanyan], 20-10-18 01:34Oooooo
My day 1 - #17 [hahayanyan], 20-10-18 11:52Seem sharing from this thread create less disturbance from the club thread hhaha
First look of the inside..
Only one suspension spring is missing, all the rest are here
The driving and speed change mechanism is so smart
There is a rubber gorment attached to the end of the idler arm at the slider of the speed change mechanism, that part seem critical ...
The way I read how's it is made , such design were optimised from a set performance wishes.. which ending up with that long motor
The long motor was clearly purposely made for that table, but not those off the shelf motor back in that time
For fitting that long motor into a domestic acceptable form factor at that time, mounted it 90 degree was the way to go
Hence with come with the choices of a driving rod with a 4 diameter section but they created a long cone, that was so smart...
Because of that long cone... There was no need for any fancy electronic components and circuitry to fine tune the speed at allllll, simply do it by a quite simple and clever mechanical link with needing a screw to lock it down.... Super smart
So instead or unlike the rim drive..it ia driven by the bottom surface of the platter
Which translates to 2 to 3 critical area must be maintained carefully as far as I seem at this moment
things i need to find out asap is amount of OIL at the spindle housing , i clean the shaft..and add some sewing machine oil.............last nite
Enjoy a coffee...watch a carton , then carry my lenco L75 day 2
Fun
最後修改時間: 2020-10-18 12:00:26 - #18 [hahayanyan], 20-10-18 15:33haha
for all lenco L75 newbie..
i find that...super niceeeeeeeee resources
https://www.lencoheaven.net/forum/index.php?board=9.0 - #19 [hahayanyan], 20-10-18 17:30platter bearing maintenance procedures
need to redo it haha ( as it really need more than a few drops................................ )
https://www.lencoheaven.net/forum/index.php?topic=2022.0
the core guild of many other tasks
https://www.lencoheaven.net/forum/index.php?board=10.0
最後修改時間: 2020-10-18 17:34:49 - #20 [hahayanyan], 20-10-18 22:57seem to have a busy oct /Nov, as someone shall sell me a L78
haha so happy - 下一頁 (1 of 2)
- 返回 ...
發覺個膠idler wheel 轉動時有很大噪音,請問那裡有此配件賣?最好在香港。謝謝!