- #115 [bigbussiness0113], 13-01-20 14:13
- #114 [bobpinpin], 13-01-19 14:22heard once in showroom with V80,V70SE and 500SE.
I think that 300 pre is better than V70 and V80 in terms of density and depth and sound stage. When compared with 500, its sound stage would be very different , the 300 tends to lean forward while the 500 goes wider and deeper. For vocals, 300 is a good choice because its density of the voice of the singer is more focused.
最後修改時間: 2013-01-19 14:22:48 - #113 [bigbussiness0113], 13-01-15 02:03Can any c-hing give comment on HP300 MKII pre amp?
-
- #112 [bobpinpin], 13-01-01 22:08Happy New Year all Octave fans!
Hope your Octave gears shine throughout the year 201
3! - #111 [dh555], 12-12-11 11:13Hi klinsmanner Hing,
Yes, basically Standard small tube no good sounding. In my experience with Octave Jubilee which I say the early stage of Octave sound too much German tone. I have to change to use M8136 instead of those cheap tube, more analytical and sweet sound.
MUST Change Tubes.
For V80 + SBB, I have also tested the same thing, very good and important for AU7.
Try E80CC as well tall bottle and pinched waist golden pin. Excellent! - #110 [dh555], 12-12-11 11:05Hi Legionee,
Sorry for late reply becuase I was busy past months.
For Octave using Penta Tubes, it is the best sounding using Genuine Vintage NOS tubes.
However, V40SE default is using EL34 equivalent tube. If you are using KT88, it is OK but you should set to to the high bias level which is both green and red LED light up.
You don't need to worry the life on tubes becuase all OCTAVE got soft start delay to protect the tubes life.
1 point which is more critical depends on what speaker you are using. If you use high sensivity speaker it is better becuase V40SE is less driving power than V70SE or V80.
Using Green setting do not extend the tube life much but acutally how new and high value is your KT88 is another important question.
Tell me what speaker you use.
最後修改時間: 2012-12-11 11:14:04 - #109 [bobpinpin], 12-12-10 22:41有冇Octave 師兄推Liuto floor standing?
- #108 [legionee], 12-10-01 00:51Hello, dh555師兄
我最近由EH GOLD改用GEC TOP GETTER KT88;對古董膽,請問你會否將BIAS調低一點?(即只著綠燈, 我用V40SE&BB) - #107 [klinsmanner], 12-07-27 12:13can anyone share advice or experience on tubes for re280mk2?
currently i use 1 x tfk 802s as front and 2 x mullard 12au7 as buffer. sound is sweet especially for vocal but overall speed is slower; if i swap the mullards to bugle boy, less attractive on vocal but speed gets back. it's really tough to abandon any pair but like to get a balance with something else. please kindly help and advise, many thanks! - #106 [dh555], 12-03-29 23:37It has been almost 7 years of my visit but seems no one in the market knows much info......
- #105 [dh555], 12-03-29 23:32More photos
- #104 [dh555], 12-03-29 23:29Andreas is showing me using a high voltage burst generator to demonstrating the Quality if their Transformer.
- #103 [dh555], 12-03-29 23:24King of Octave visited Octave GMBH in 2005.
Andreas is demonstrating the performance of its output transformer at full gain (short circuit). - #102 [dh555], 12-03-29 23:18Octave Jubilee
- #101 [dh555], 12-03-29 12:56ha ha.
No photoS!!!!!!!!! - #100 [keltam], 12-03-28 22:43Can we have more photos, this will make this page looks better
- #99 [andycheung448], 12-03-26 19:44Thx.
- #98 [2011], 12-03-26 19:35用過 Octave pre hp300 好機,good
- #97 [andycheung448], 12-03-26 10:06請教各位師兄,有無用過 Octave pre HP300MK2, 小弟有啲興趣.
最後修改時間: 2012-03-26 10:18:09 - #96 [bobpinpin], 12-03-25 23:01Thank you Klinsmanner brother, hope the list will be more complete and longer. We should be proud of having Octave system,don't be shy other brothers, please update it!!
1)Bobpinpin: Octave pre + power + Liuto
2)klinsmanner: dcs p8i + herron vtsp/1-166a +
octave re280 mkii - 下一頁 (4 of 9)
- 返回 ...
Auy good tubes (12au7 & 6922), can anyone please recommed?
最後修改時間: 2013-01-20 14:15:59