- #17 [龍虎豹], 20-02-20 21:15網上有manual download.
- #16 [cat946], 20-02-20 17:20求教too, 我是黑膠初學者,見到此post才知要set overhang 5mm, (之前以為把唱針位置set至轉盤中心才正確)
另外,請問支SAEC 308 個吊重(canceller weight) 位置及吊重支架(canceller post)的位置是如何set的? 而唱臂傍邊果粒細metal weight是否用來增加唱臂向心力的?要如何 set才正確? 謝謝. - #15 [009terry], 19-06-27 12:20Chi兄!太謙了!很多唔hiend嘅器材都好聽過甚麼甚麼貴貴的hiend器材,就例如小第的ㄧ對BC1要尼聽音樂已經非常滿足了!
-
- #14 [fotheringay], 19-06-27 01:49After using the 308 for more than three weeks now and I have to say I am totally sold with the arm.
In the past I mainly used cheap or DIY arms and the 308 is probably the first Hi-End arm to me though people say the 308 is just an entry level arm.
Well, I am no Hi-End man so it is Hi-End enough for me.
I realised I haven't taken any pictures of the arm here there we go.
最後修改時間: 2019-06-27 02:01:12 - #13 [009terry], 19-06-09 23:40Great!
最後修改時間: 2019-06-09 23:40:48 - #12 [fotheringay], 19-06-09 19:46
Another video.
- #11 [fotheringay], 19-06-09 17:25That what I thought as well.
- #10 [009terry], 19-06-09 17:16Oh...
一路以為saec實重過sme古唔到係差唔多重!!
齋睇鋼水sme不是saec這個級數"質量"! - #9 [fotheringay], 19-06-09 16:01Hi Terry,
As far as I know the FONS is equipped with SME 3009 as a standard arm. The SAEC 308 is very much close to the SME 3009 in terms of design and mass.
I just drop the SAEC in without any adjusting the springs and it plays pretty well. I did add weight to the counter weight for accommodating some heavy MC carts. - #8 [009terry], 19-06-09 07:19Chi兄!
308對Fons彈弓不構成負擔嗎? - #7 [fotheringay], 19-06-08 21:24
New user here.
- #6 [AS09899], 19-06-08 20:23如用家不按照原廠提拱數據安裝唱臂,而用不同有效長度安裝唱臂使用時,同時都要改變主軸與唱臂主軸距離,唱頭既循跡角度被也會改變的,有時候會不與唱頭殻對齊。
- #5 [hellomimi1668], 19-01-09 22:48謝謝各位師兄教路,再用心調教下先。
- #4 [mentos], 19-01-08 17:24用原裝設定,overhang 5mm. 最重要係你個唱盤要平水準確,必須較好個balancer去到界乎外移與內移之間。支臂—天生係惡死進取。要夾頭。我問過好多人,全部都用原裝。
- #3 [blackspin], 19-01-08 15:18Actually, just need to adjust the overhang to 5mm would be fine.
All of my SAEC tonearm (I have four different model) are setup based on the user manual and original specification. - #2 [bambino], 19-01-08 13:20SAEC 308
effective length = 240mm
overhang = 5mm
pivot-to-spindle = 235mm
inner null point = 39.18mm
outer null point = 60.618mm
多數人用嘅 Löfgren "A" (Baerwald)
inner null point = 66mm
outer null point = 120.9mm
SAEC 嘅geometry係與別?同 - #1 [hellomimi1668], 19-01-08 12:55請各位師兄教路:
SAEC 308唱臂無論用235或240mm都不能夠教到準確的2點null point!!應該用幾多mm好呢?請各位師兄俾d意見,先謝謝。 - 返回 ...