- #21 [雪耳], 21-05-17 12:57我以前都會買羅湖城的五支火柴,準確度和真的也有九成九,到見在都搞不懂為什麼要買貴100倍的所謂真貨。
- #22 [Akaigxc], 21-05-17 13:4135A根本被神化作,被本地某雜誌及其所屬的既得利益者,多年長期以來過度吹捧!某些人可以買成幾十對放在家中砌成一幅喇叭牆!這些真是玩音響的所為嗎?聽得唒那幾十對嗎?似出貨多過似自用羅!當年英國佬設計出來原本只是放在流動廣播車上作現場鑑聽用,對喇叭既要求並不高,反正只在戶外使用而不是在Studio,受好多客觀因素影響,因而不能要求太高,況且,英國佬一早就淘汰咗,反而係因為香港某部份人過度吹捧,見有利可圖,英國佬才話重新翻製!但無論如何,這個喇叭技術含量不多,以今天的人類科技去重做70年代初的技術,要複製根本easy job,買幾千元根本已經賺到笑,若然要上萬,就係人為操控某取暴利!!!
- #23 [Thanatos], 21-05-17 14:42其實我覺得啲再版嘅方向有啲錯
玩一啲咁有特色嘅喇叭,九成係情意結
有幾多成係英國製造,尤其係主宰音效命脈嘅喇叭單元,對於情意結來講非常重要
如果我係廠家,點都要堅持搵返KEF響英國製造單元
唔關大陸做唔做到咁嘅技術事,而係情意結
用理性去玩,唔駛玩佢,用情意結玩,就要100% 英國製造 -
- #24 [Akaigxc], 21-05-17 14:52之前據悉KEF曾講過,用來生產35A成套單元的那個模具,已經用到殘用到爛,再繼續生產下去,單元質素無保障,如果開製新模具,對廠家而言,不化算及有其他商業因素考慮,所以才宣佈單元停產!今天如果真係要100%英國製,唯有看看有冇其他廠家貨倉底仲keep有少量kef單元存貨,才可成事!
- #25 [Thanatos], 21-05-17 15:04收人幾萬蚊一對,乜嘢模都做到
不過我唔相信英國佬嘅工具捱唔過一百年 - #26 [rcywong], 21-05-17 15:20Friendly speaking; although China can produce LS3/5a in 90% of duplication, but those drivers may not as durable as UK made. I remember I bought a pair of real Rogers LS3/5a (MIC) over 10 years before, the T27 tweeter was defective after one year, then I needed to contact the sole agent for repair. So I think most users demands the pair of speaker can serve them at least 10 years with problem free.
- #27 [hahayanyan], 21-05-17 15:25for those bass driver............
excluding the spider....., there are 3 plastic injection mold may be involved
no matter the mold is made in japan, German ..swiss..etc... for such physical sizes........., hardly be too expensive..
yrs (may be 12 yrs,...14 yrs ago..i need to make something with quite similar property as a bass driver clone..
same mold... different injection machine... from best china made.. ,to Japaneses...german made.. USA made...
etc..
all of those machine made those part by almost same molding parameter etc................... but that part broke so differently... apart from "sizes tolerance " were the same.......... everything else were quite different
China high End machine was hkd270K.................., ending up paying HKD 800K for that german machine , at the heart...wishing the mid price Japanese electric driven machine could do the task ( hkd 600K )...etc.. however
i assume same things applied to speaker cone making..... - #28 [Hifingo], 21-05-17 15:36#26
Let's assume :
1) bestvox is costing to above 5K
2) falcon and roger are costing you over 20K
3) 3/5a will not be perfect at all aspects, but it has something attractive which you can't help to sell it. You keep it as your 2nd speaker
4) No one can certainly the new 3/5a can be durable as long enough as OLD roger... Or no one can tell their old roger can run or being repaired again after another decade of services..
If so. I will go for 5K Bestvox... Who care?
最後修改時間: 2021-05-17 15:41:43 - #29 [雪耳], 21-05-17 16:33世風日下,在今時今日,買對線買個拖板都話一二三萬,35仔已經唔可以話貴了。
- #30 [Edo], 21-05-17 20:21#26 我嘅經歷係幾年前由於意外導致隻高音沒有聲音,拿出去給師父維修要500元。
之後我e-mail給spendor問他們意見,他們回覆因為此型號太久已沒有存貨,他俾咗條link建議我去這裡買來更換,
而這條link正是現在還有LS3/5a出的Falcon,他說沒有問題的,而他們的單元亦是UK hand made的。 - #31 [rcywong], 21-05-17 22:04#30, Yes I know Falcon is selling diy kit for 3/5a. At that time price was not too expensive in yr.2007. Nowadsys, Falcon brand is getting famous so they are asking high price.
- #32 [Edo], 21-05-18 04:21冇辦法㗎喇!又要純種英國嘢,貴就一定,我覺得總好過係二手市場買啲十幾廿年前不名來歷嘅單元。
- #33 [V.C], 21-05-18 12:15洋國税重所以賣貨好貴,要清楚消費者負費買洋貨大部份都係税。
最後修改時間: 2021-05-18 12:24:31 - #34 [rcywong], 21-05-18 12:35Hong Kong is no importation tax. Products exports from UK should be excluded VAT.
- #35 [V.C], 21-05-18 13:54洋國廠商為商品繳稅已經很重份量,税收自然轉到環球消費者,如果香港有入口税就無生意可做了。
- #36 [Edo], 21-05-18 14:54搞清楚啦!我係直接官網嗰度買返嚟㗎!何來說啊⋯⋯
- #37 [antchan], 21-05-18 16:05其實有冇師兄試過國產同原裝AB比較過有咩分別?
- #38 [CS168], 21-05-18 16:58#37.其實有冇師兄試過國產同原裝AB比較過有咩分別?
》》》Rogers 11 Ohm,國產同 UK , 中頻及高低伸延係相當接近,
舊的UK 係熟咗,國產音色一様但收得緊小小是正常。 - #39 [CS168], 21-05-18 17:02
如果7-8千至一萬內都合理,
如果2-3萬以上?????
不如訂水貨英制 Tannoy 史大林 GR !!!!!!! - #40 [CS168], 21-05-18 17:19
LS3/5A 聽過玩過,理性去聽,
其實係有小部份音色伸延部份係失去咗或减弱咗,
但!佢中頻音色上聽小品樂曲,係可以比美部份十萬元級坐地高級喇叭,
即係有尐人喜歡玩及收藏古董開蓬車,但又不满舒適性及隔音效果。
這只可説是她的特性( 有性格 ) ^^" - 下一頁 (2 of 8)
- 返回 ...