- #1 [Leungwai], 19-08-14 21:50
- #2 [羅密歐], 19-08-14 22:07如果是SACD hybrid,改設定為讀CD層便可。
- #3 [phil.ng], 19-08-14 22:17光纖吾準出DSD、即是你這樣setup 只能聽CD
-
- #4 [Leungwai], 19-08-14 22:19羅密歐 師兄
係120到set定係oppo到set
我揾吾到
最後修改時間: 2019-08-14 22:29:02 - #5 [Leungwai], 19-08-14 22:21Phil.ng 師兄
係米要用返RCA出先得?
同軸線又得唔得? - #6 [phil.ng], 19-08-14 22:42係o
市面上只有少數機才能 出/接收 DSD、如Denon link
Spdif 都吾得
只有用internal DAC丶不過203 吾好聲丶Oppo 吾識教聲
要玩好sacd 要作大投資 - #7 [mcc2018], 19-08-14 22:43大菠蘿個DAC module 的BNC/XLR/Toslink 都只是support PCM 所以一定解唔到SACD 個dsd data stream, 而且SACD 個digital output standard 係加密左既,有的話都係用非標準做法,如esoteric 幾個型號,而且要一對sacd+dac配合用才可以。
- #8 [phil.ng], 19-08-14 23:02203⋯吾知可否set DSD convert 去pcm , 這可能會好聲過用203 機內DAC
203 無環牛丶analogue 弱 - #9 [phil.ng], 19-08-14 23:06有綱話得
這可能是講Hdmi, 你搵有冇可能同時set spdif
最後修改時間: 2019-08-14 23:12:43 - #10 [phil.ng], 19-08-15 01:38加這就可convert dsd to pcm (coax out)
“This heavily engineered audiophile module features custom DSD to PCM conversion algorithms and state-of-the-art jitter reduction system. The result is a reference quality digital audio signal suitable for the most demanding applications of a multi-channel digital playback. ”
http://www.jvbdigital.nl/jvb.asp?level=sdi&page=title&title=974
最後修改時間: 2019-08-15 01:39:53 - #11 [Leungwai], 19-08-15 09:46其實換部SACD機120出吾出到SACD層啲聲
因為oppo203冇RCA出 - #12 [phil.ng], 19-08-15 10:02203 好多RCA, 包括spdif digital
最後修改時間: 2019-08-15 10:03:54 - #13 [Leungwai], 19-08-15 11:21Phil.ng師兄
如果用呢條線得吾得呢 - #14 [Phil.ng], 19-08-15 13:28有更好音樂味的
留意二手 - #15 [phil.ng], 19-08-15 14:51Your input
- #16 [phil.ng], 19-08-15 14:53Your output on 203
- #17 [Leungwai], 19-08-15 16:49謝謝Phil.ng 解答
買條線試下先 - #18 [phil.ng], 19-08-16 23:11如買BNC to BNC 線丶要加一個adaptor 入 203
- #19 [mcc2018], 19-08-17 08:33這類高速數碼接線,影響音質深遠的是"impedance matching",尤其要轉接的。
- #20 [Krell], 19-08-17 10:39用BNC轉RCA頭不會好聲。CANARE有75 OHM COAXIAL用的RCA頭。
The Canare RCAP plugs are a different breed, and have more in common with the crimp BNC plugs widely used in the broadcast industry than they do with solder-type RCA plugs. In the Canare RCAP, the coaxial cable, still encased in its dielectric, enters the rear of the connector through a perfectly round tunnel of nickel-plated brass; because this tunnel is sized for the specific cable diameter (unlike solder-type plugs which often are "one size fits all," the RCAP is made in numerous different sizes) and is crimped to the coax shield, it effectively replaces the stripped-away shield of the coax, continuing the cable's 75 ohm impedance along toward the connector tip. At the end of the cable dielectric, the center conductor is crimped to a gold-plated pin which fits a socket centered in the plug body to make contact with the RCA plug pin.
最後修改時間: 2019-08-17 10:42:47 - 返回 ...
但入隻sacd就聽吾到
各位師兄知吾知道出左咩問題
兩部機都試過晒啲settings都吾得