- #1 [johnparvit], 22-05-03 14:17多數人理解前級調音,後級功率放大,仲有無更準確和更具體描述?
- #2 [cornercube], 22-05-03 14:30up下
電壓放大
vs
電壓 & 電流 放大 - #3 [hahayanyan], 22-05-03 14:30本身是一個放大器 去驅動阻抗相對 低的喇叭
因為目前市面上沒有單一的放大裝置或零件.. 可以一級或一個步驟完成這個工作 ( 對音頻質素嘅要求)
所以這個 放大工作其實就分成兩三個階段 從而達到我們對音頻質素嘅需求 或有效驅動喇叭... 通常最後的階段 我們稱之為後級
久而久之 或者因為市場因素.. 衍生出兩個獨立產品等等...
there are actually a few volume control tactic...may not be a must to do it at pre amp..etc..
always make sense for the source selection at the front end
這是我認識的本質
最後修改時間: 2022-05-03 14:35:34 -
- #4 [johnparvit], 22-05-03 14:40haha 師兄確是學霸,這方面甘拜下風。
我個人粗淺睇法係前級放大方向係左右音場,後級係放大前後音場。
這個方向再思考下去香港人屋企一般都唔大,特別係近10年的豪宅能使用的音場深度超過15呎既好罕有,左右一般既非豪宅都可以有10呎,當然深度就可能只有6呎。
咁既空間環境下一部大輸出既後級就顯得不能完全發揮出來。應該將重點擺係前級身上。 - #5 [johnparvit], 22-05-03 14:58除非另闢房間專門聽歌,香港既客廳都係闊而淺,一部前級同細喇叭應該比較適合
- #6 [hahayanyan], 22-05-03 15:02不同思想方向吹水好快樂
我是一個悶蛋.. 所以 第一觀感切入點 都係比較 機械性
你的本質切入點就跟最終hifi感受嘅關聯性
Team always make things better.. Haha
我嘗試用你的切入點代入零件特性
. 還未得到 一個結論
Haha - #7 [johnparvit], 22-05-03 15:06我係一個唔怕悶既人。同意 team work 呢個講法。
可能我根本唔識電路,零件既知識,只能用聽感去思考推理。
係調較系统既過程中,搞好左電是非常重要的,重要性多過換一條靚線或換機,而後級既電靚是重中之重
最後修改時間: 2022-05-03 15:11:53 - #8 [hahayanyan], 22-05-03 15:13as i never look at any headphone and know so little about headphone...
some headphone seem to be a high impedance device..., it may be ok with some ONE step Amplification stage..
but today..we are talk about an AMP to drive a speaker............
i believe amp may not have any solidly known manipulation ability for sound stage width / depth
but it may be some known technical tactic to for "space perception "
may be the output to the speaker consist of some off phase signal ( i suppose it is do able )... it may create a "Space" feeling.......
- #9 [johnparvit], 22-05-03 15:22我咁岩用既後級係可調音量的,因此可以試到不同前級 + 後級音量既效果,前級確係向左右放大的,就好似 unzip file 咁爆出來。
- #10 [hahayanyan], 22-05-03 15:25haha do a blind test...
have a friend or family
A) keep the pre amp volume unchange..., and change the power amp volume to X level
B) keep power amp level, but change volume at pre amp to get same X level
interesting.......... love to know the outcome by a blind test...
fun
conduct the test at
1 ) level X.. normal listening volume
2 ) X - 12 db
3) X + 12 db ..
things may be quite difference from those typical case
haha
最後修改時間: 2022-05-03 15:29:11 - #11 [johnparvit], 22-05-03 15:32後級一直只有一部,前級有幾部,有 d前級感覺好似 "綁定左"後級咁。 要將後級音量調到最大。
有 d 前級夾呢部後級就好似開頭講,後級可以扭任何一個位置 - #12 [hahayanyan], 22-05-03 15:34後級一直只有一部,前級有幾部,有 d前級感覺好似 "綁定左"後級咁。 要將後級音量調到最大。 << it may be explainable......need to think think,..why and how..
最後修改時間: 2022-05-03 15:35:11 - #13 [johnparvit], 22-05-03 15:43既然後級有音量制我當然唔會放過將 source 直接駁啦。
用前級既駁法,定左後級要開音量到3咁比較好聽,source 直駁後級又係3既時候音壓就超大聲而且。咁就想到前級出後級既線正常應該要比 source 出前級幼 d先岩,因為 source 出前級既信號對比,前級出後級是比較大, 如果前級出後級仲用粗線就影響信號 "形狀
最後修改時間: 2022-05-03 15:44:52 - #14 [johnparvit], 22-05-03 16:01#12 why and how
後級音量制有20格,唔綁定既前級駁後級假設3或4格最好聽,綁定式前級要扭到18格先有相同音壓。 - #15 [niceday009], 22-05-03 16:04從有家用HiFi開始
以前音源黑膠為主,MC phono 要放大1000倍容易受大火牛後级干擾,前級帶RIAA对重播關鍵因phono amp部部唔同声,TAS 同Stereophile 都强調前級重要性
呢家高电平入,好多廠索性做埋係後級,其實係好事不過發燒友唔可以左配右配試声 - #16 [hahayanyan], 22-05-03 16:11Hi niceday
現在哪些 dac... 隨時有 很高嘅output voltage...
all dac... 輸出stage 一定係有一啲放大 circuit..
如果大部分這些dac.. Output stages a
Is a 2 stages.. 嚴格上來說可唔可以講佢其實已經代替咗 pre. Amp function but actually it is a pre amp stage inside the dac
Or somewhere the dac nowaday.. Can one stage to get those high output from one simple OpAmp?... 如果係咁.. 前級嘅存在已經沒有
Wonder..why they make those DAc so high output...nowaday?
1) why not...same fidelity or even better... with one simple stage ....why not..especially there is a level control
2) intention to replace pre amp..... and more selling point, and make the overall system cost lower for some pople care about the cost.... or create a "Purer signal Path " preception ? ...i.e. a selling point
etc...
haha
最後修改時間: 2022-05-03 16:16:38 - #17 [johnparvit], 22-05-03 16:16現今 source 輸出聲音比前級仲大,但唔經前級既聲比較無咁順耳,可能聽慣左
- #18 [hahayanyan], 22-05-03 16:22睇這方面我還有很多不明白嘅地方, need some study.. Such as
From a pre amp... With a dac with so high output.
這麼大的輸入電壓... 是否經過一些 衰減 步驟 才再次在前級放大..( 粗略看很多pre amp的電路冇衰減器在前端) ... 如果係咁.. 用什麼辦法衰減係比較good?
咁即係佢哋經過第一級放大的時候透過第一級放大嘅circit鋪排... 去除了多餘的輸入電壓?
..
Etc
Haha things to learn for me
同一疑問.. Power amp 用什麼的手段去處理過大的前級輸入
Or it has no tactic.. Just clipping the output.. Haha
其實都是懶散這些東西其實都自己有能力找到答案... By software or mearuement test.. Haha
但係在這地方發問大家吹吹水.. 聽取有經驗的人分享都是一種樂趣
Haha
最後修改時間: 2022-05-03 16:28:54 - #19 [niceday009], 22-05-03 16:35從訊號純淨度睇,高电平放大級做係合併後級比分開係好好多
訊號線可大幅縮短,線長係对訊號純度有損耗
尤其胆前級之損耗甚大,因為分体胆前級往往要加一級电流放大驅動1米以上外接訊號線,而去做成合併可省电流放大級因為負載這級是下一級胆,其輸入阻抗有成1M ohm以上,甚至設計成直接交連更加純度高
最後修改時間: 2022-05-03 16:41:02 - #20 [hahayanyan], 22-05-03 16:55hi niceday
general speaking such "电流放大級".... how much it 放大 ? in term of 1:1 ...current higher..and voltage lower...
or 1:1.3...etc voltage constant..but higher current...
or..
thxxxxx
haha - 下一頁 (1 of 5)
- 返回 ...