- #151 [es], 14-04-28 11:54
- #150 [Ptcm], 13-06-19 21:07請問 krell 300i or 500i amp 水貨,俾錢代理會整嗎?
呢兩部機易壞嗎?
謝謝。
最後修改時間: 2013-06-19 21:10:54 - #149 [AV.son.], 13-05-17 09:41請問各師兄:
MDA-300
KSA-2
聲音是否粗鞋?
音色偏向是怎樣呢? 那部較好呢? 它們各自目前的二手價是什麼呢?
多謝 -
- #148 [lw], 13-05-06 19:11Thanks audiofans ching, you did a nice job to change all the dead caps in Krell 200s and Krell CDP
- #147 [lw], 13-04-26 19:57各位ching,我的Krell 200s 已二十年,早幾個月開机有Dee聲,之後warm up 十五分鐘正常返,上星期终於無聲,檢修後發覺小電解啡色 spargue 電容全部報廢,漏出的電解液另pcb 短路,全部要清洗更换,没有spargue,只好換上Nippon Cap。
各ching 的krell 十年以上,記得作身体檢查。
幸好銀色spargue 470 uf 100v 全部正常,請教有無ching 知道那裹可以買NOS 的銀sprague ,因為會影响音色,盡量用回原廠。
最後修改時間: 2013-04-26 19:58:18 - #146 [JA7], 13-03-04 12:28Krell KPS-30i, KMA-160 & KAV-250a
- #145 [湯美], 13-02-26 00:04hi
最後修改時間: 2013-02-26 00:05:55 - #144 [湯美], 13-02-25 23:16
最後修改時間: 2013-02-25 23:16:57 - #143 [oakland], 12-12-03 11:07my krell digital front end
- #142 [hong12], 12-12-01 20:08各位C兄,小弟現時這樣配答,暫可接受,本人想換pmc,有冇其他意見呢?
- #141 [hong12], 12-12-01 20:03
- #140 [hong12], 12-12-01 20:02
- #139 [civic], 12-10-18 12:13各大C唔知現在krell 2250二手賣物价?
最後修改時間: 2012-10-18 12:17:30 - #138 [cy05], 12-03-03 17:58i have a krell 150 power amp.
ehen power up, the final relay switch not on and cannot connect to the speaker.
any c hing knows how to fix it? - #137 [mayyan], 12-03-03 10:18請問各位師兄,XLR 輸入是否2+, 3- ?
如用Eso CDP要否用反相線?
謝謝! - #136 [vincentaudio], 12-02-11 10:25tune bias 我最拿手...
先用絲巾擦幹凈機頂灰塵
再以六角匙鬆開螺絲 小心打開機頂蓋板
用一把地盤用的尺半長粗螺絲批(一字批)
放落機內 胡亂攪幾下...(如想見到火花 可插電操作)
為保喇叭不被燒毀 可事先除下...
最後用他表量度輸出端有無剩餘直流 便大功告成
Easy job...
Ha ha ha ha... - #135 [stampwong], 12-02-11 02:48support
- #134 [gsx1100], 12-02-10 11:06Thanks C-hing for the infromation.
But I do not know how to tune the bias?
Which screw on the circuit board is?
Do you think you can show me photo?
Leung - #133 [PureClassA], 12-02-09 23:28>>The right side two heat shinks are just warm<<
Tune bias la! - #132 [gsx1100], 12-02-09 21:09Dear C-hing,
I have a KSA80b power amp.
It sound no problem on both channel. I love it.
However, I find the temperture of both side heat shink is different.
The left side two heat shinks are hot.
The right side two heat shinks are just warm.
Is it any problem?
If yes, it is a problem, do anyone know where I should take it to have a checking or service?
Hope C-hing can help!!!
Leung
最後修改時間: 2012-02-09 21:10:20 - 下一頁 (4 of 11)
- 返回 ...
請問為什麼其中一邊操作突然會自動熄機? 關機後,要約十分钟才可再開著. 是否有什麼零件要立即更換或維修?請同好指教!