- #21 [hercules], 08-03-21 19:47
- #22 [davecywong], 08-03-21 20:07Hercules,
I think I modified too much, and I love to modify the factory product to have a better presentation, it is really wasting $ sometimes, but with a lots of fun. - #23 [hercules], 08-03-21 20:50You know that's the reason I sold my Planar 3, as I know improvement there, but after adding them the cost will be more than the TT itself. Just wanna sit back and relax, since I got the BIX+ I never put a cent on hardware anymore, but more on soft side...
-
- #24 [tonywong], 08-03-21 21:36我鐘意呇陪翃over
- #25 [Pak], 08-03-22 10:22攪到我都心思思想玩下,請問davecywong 兄換邊樣先最有明顯幼?
- #26 [kcman], 08-03-22 10:52好高興看到有高手玩rega, 小弟新手入門, 都有朋友推薦rega唱盤, 想請教一下 P3-24, P5, P25的主要分別及價性比, 預算有限, 想買個中等的, 等有$$再升級. 另外以上三個盤是否都可以配MC/MM頭
- #27 [davecywong], 08-03-22 11:16攪到我都心思思想玩下,請問davecywong 兄換邊樣先最有明顯幼?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This one First, 100% best buy ever! 係 專 for Rega 用, 低 音 多 左, 通 透 左, 高 音 好 滑, 吾 會 叫.
Techno wegiht 會 穩 定 D, 同 個 Look Pro D!
Tckl Hing / Hercules Hing,
I lost the Link of this Platter, and Techno Weight, could you Guys please re-post it for Pak Hing.
Thanks Dave
- #28 [davecywong], 08-03-22 11:23最有明顯幼?
~~~~~~~~~~~~~
- #29 [davecywong], 08-03-22 11:29P3-24 係 新 款, 用 24V Motor, 可 加 Power Supply 及 33/45 控 速, 但 淨 盤 新 價 好 似 幾 貴!
P5, P25的主要分別
~~~~~~~~~~~~~~~~~
基 本 上 差 吾 多, P25 個 Look 吾 同, 無 再 出 La, 但 個 時 我 上 代 理 問 過 P25 無 Duck 改 24V Motor, 即 = 無 Duck 加 Power Supply 及 33/45 控 速, 好 煩! - #30 [童虎], 08-03-22 11:41原來這裡有那膠hRega產品的用家及高手，大家一起討論真熱！^^
- #31 [童虎], 08-03-22 11:42原來這裡有那膠hRega產品的用家及高手，大家一起討論真熱鬧^^
- #32 [davecywong], 08-03-22 11:50童虎 Hing,
Rega D Product 係 好 抵 玩 Ga, 又 穩 定, 音 樂 感 又 好, 但 係 而 家 貴 左 DD! 英 鎊 太 高 La!
如 你 換 左 個 Arcylic paltter 落 去, 你 就 會 掉 左 個 原 廠 Glass platter Ga La. 聽 過 AB 比 較 就 知 分 別 有 幾 大, 聽 完 會 番 吾 到 轉 頭. - #33 [童虎], 08-03-22 12:24Dave Hing,
Arcylic paltter 在哪裡可以買到呢？ - #34 [davecywong], 08-03-22 12:28Tckl Hing / Hercules Hing,
I lost the Link of this Platter, and Techno Weight, could you Guys please re-post it for Rega Fans. - #35 [davecywong], 08-03-22 12:40
- #36 [davecywong], 08-03-22 12:41
- #37 [davecywong], 08-03-22 13:46童虎 Hing,
Check with them, does it suitable for the your New P5 or they have an-other size specially for New P5, but I think should be the same as my P25. - #38 [童虎], 08-03-22 21:57Dave,
How much of your Rega - MC Cartridge - Apheta? - #39 [tckl], 08-03-23 01:44童虎 hing,
it is better to go for p7 directly, because if you buy p-5 and make motify as dave hing, may be cost same as p7 finally.
f.y.i.
p7 - 14k
power supply - 3k
acrylic pattern - 2k
Aluminum Sub Platter - 2k
= up-grade -= 7k - #40 [davecywong], 08-03-23 14:47it is better to go for p7 directly, because if you buy p-5 and make motify as dave hing, may be cost same as p7 finally.
Tckl Hing,
Yes it is X 12! Calculate Properly before you go.
power supply - 3k
acrylic pattern - 2k
Aluminum Sub Platter - 2k
Techno Weight - 1k
= up-grade -= 8k - 下一頁 (2 of 69)
- 返回 ...
回覆(16): Rega Fans Club!!!
Everytime you post the photo will make some shock!!