- #41 [hetzer], 08-06-13 22:15I have tried Ap Liu Street belt before. Those belt works but it is not pefectly fit. My TT needs a 500mm x 4mm belt. The closest one in Ap Liu St is 20" (508 mm) x 3/16" (4.5 mm). Even the difference is so small, it gives some trouble. Usually the length is no too important. As the belt gets old, the length will change naturally so the length is never accurate. The main trouble comes from the width. As the pulley is V-shaped, a wider belt means a little change in the gear ratio (a smaller pulley). My TT then turns faster than 33-1/3 rpm slightly. If you don't mind an inaccurate speed, that's fine.
- #42 [cdm1bkk], 08-06-15 02:35Here is my Thorens TD124 MkI and TD135 MKI
- #43 [cdm1bkk], 08-06-15 02:41with shure M3D MM
-
- #44 [cdm1bkk], 08-06-15 02:42inside
- #45 [cdm1bkk], 08-06-15 02:44TD124 MKI + SHURE SME 3009 S2 + KOETSU ROSEWOOD
- #46 [cdm1bkk], 08-06-15 02:46SWEET KOETSU ROSEWOOD
- #47 [cdm1bkk], 08-06-15 02:48...
- #48 [hetzer], 08-06-15 22:45Wow, TD124.
I have never seen its real object in Hong Kong. What a great gear. - #49 [cdm1bkk], 08-06-16 01:33hi i m from bangkok thailand. thanks
- #50 [xxx111], 08-06-16 11:58hetzer hing :
Thank for the explanation. I need to investigate the effect from the different wide of belt . - #51 [kngwc_1220], 08-06-22 09:08hetzer hing :
我尋日去過永盛見到Audio Technica的Head Shell線,一套4條8個夾仔.但我未有立即買回家我想請問如果將那些夾仔除下來再從新裝上會否把那夾仔整殘? - #52 [hetzer], 08-06-22 16:19kngwc_1220 hing,
夾仔應該唔可以除,只可以舊線焊新線。多個焊點心理上係會差D,但係你部又唔係Prestique,聽唔出分別就算la。 - #53 [kngwc_1220], 08-06-22 22:05thx!巴打
- #54 [lowther_chan], 08-06-22 23:16Hi,
I'm using Thorens tonearm.
Lowther - #55 [$$$], 08-06-23 12:31My TD-320 lost the power supply !! Does any c-hing can help me for the spec of the power supply ? Looks it is 14V ( AC or DC ) ? Thanks.
- #56 [hetzer], 08-06-23 21:13
- #57 [$$$], 08-06-25 14:33Thanks.
- #58 [chico1969], 09-03-02 17:14Dear Brothers:
Any body knows where can get a 50HZ pulley for T160 please.
Thx in advance
Tim - #59 [stephli2004], 09-04-23 09:02My TD125-MK2 with SME3012
Over 40 yrs - #60 [stephli2004], 09-04-23 09:06My TD125 MK2 with SME3012 tune arm
- 下一頁 (3 of 12)
- 返回 ...