- #124 [lamlamlay], 20-08-22 10:20有無消息會出USB>USB洗水? 同埋有原廠LPS
- #123 [JTA], 20-08-20 21:31f-u-n-g 師兄,
謝謝你的推薦!
最後修改時間: 2020-08-20 21:31:40 - #122 [F-u-n-g], 20-08-20 20:52非常推薦 用LPS落mutec, 靜好多.
-
- #121 [patkwok], 20-08-20 17:39MC-3 manual p.22
- #120 [patkwok], 20-08-20 17:27MC-3 manual p.22
最後修改時間: 2020-08-20 17:40:27 - #119 [patkwok], 20-08-20 17:25#110
" 請問其洗水功能只限於PCM,DSD不可以洗水?"
睇返Mutec個homepage 講 MC-3+ Smart Clock USB係會
Converts DSD/DoP streams (64-256) to PCM audio with selectable output clock rate
即係佢要由DSD 轉左做PCM跟住洗水出返黎。
Apart from transmitting standard PCM audio the USB interface is further capable of receiving native DSD and DoP streams with up to four times the SACD clock rate (DSD256). These streams will be re-clocked and converted to PCM audio by the MC‑3+USB in realtime to pass them on to the five audio outputs simultaneously. The desired clock rate for the digital outputs can be selected on the front panel with options between 44.1 kHz, 88.2 kHzand 176.4 kHzthat are independent from the clock rate of the incoming DSD or DoP streams.
最後修改時間: 2020-08-20 17:29:14 - #118 [JTA], 20-08-20 16:51f-u-n-g 師兄,
3.3v 是供電給 迷你10MHz clock 。
我的 Mutec MC3+ USB 是沒有用外置 LPS. - #117 [f-u-n-g], 20-08-20 14:15mutec is around 6.5V, not 3.3
I am using LPS also
最後修改時間: 2020-08-20 14:16:08 - #116 [panda000], 20-08-20 11:55JTA, 請教一下,你點樣整個3.3V dc supply出嚟?
- #115 [f-u-n-g], 20-08-20 11:07JTA, seems u are using LPS for Mutec ?
- #114 [JTA], 20-08-18 19:18Mutec MC3+ USB 機身比較輕, 我手上較粗和重的數碼線及電源線都不能使用。幸好手上有Apogee 的數碼線,把 RCA 轉做 BNC 接頭也不太困難。
- #113 [JTA], 20-08-18 19:13#112
Panda000 師兄,
謝謝!小弟真係唔識,這兩個月很努力去搜集資, 多得 Mutec 和 Lotussys 耐心的指導。
:) - #112 [panda000], 20-08-18 18:34re:#106 師兄你真係謙。
- #111 [JTA], 20-08-18 16:26#110
Tom55 師兄,
有關 Mutec MC3+ USB 的問題小弟是直接發電郵給 Mutec. 電郵地址是 contact@mutec-net.com
希望你找到答案。 - #110 [tom55], 20-08-18 15:55請問其洗水功能只限於PCM,DSD不可以洗水?
- #109 [f-u-n-g], 20-08-18 13:09glad to know someone using ohm transformer also
- #108 [JTA], 20-08-18 11:23:)
- #107 [JTA], 20-08-16 12:23Tom55 師兄,
你好!如圖。 - #106 [JTA], 20-08-16 12:20Re.#104
小弟對此類電子產品也是全冇認識,我在兩個月前才開始學習及尋找一些不會太貴的 10MHz clock.
我未用過 Cybershaft 及我只是在學習中所以不能給你意見, sorry ! - #105 [tom55], 20-08-16 10:30JTA 師兄,請分享線路連接圖
- 下一頁 (3 of 9)
- 返回 ...