- #91 [ckwan2014], 19-07-02 06:05我用開Kester﹐63/37同60/40都有。
- #90 [OST], 19-07-02 05:18日本川崎KAWASAKI 錫 63/37<<
真日本的?質素ok ma?
THX! - #90 [大山創], 15-11-05 09:24德國古董西門子幾好線條特別靚
-
- #89 [schmike], 15-11-04 21:27謝謝elo/mcc2000兄
又學多樣野
不過已唔再做廠只係維修佬一個 - #88 [羅密歐], 15-11-04 21:19elo師兄,明白了,謝謝!
- #87 [elo], 15-11-04 20:58#84
I would say process engineer together with IQC engineer should know the IPC or J-STD tests. If for a procurement engineer, they may not need to know, they just need to ask their subcontractor to confirm the solder is qualified to do the job. Then process engineer of the subcontractor will ensure the solder passes the necessary tests.
However as mcc_2001 suggested, the more you know, the better you can 瀉镬.
最後修改時間: 2015-11-04 21:01:47 - #86 [elo], 15-11-04 20:46羅密歐 Hing
2% - Sn62/Pb36/Ag2. It is considered as Leaded solder. Developed to solder component with silver surface.
3% - Sn96.5/Ag3/Cu0.5 (SAC305) - Most common Lead-free alloy.
4% - Sn96/Ag4 - A high silver content Lead-free alloy. Preferred by Semiconductor industry. - #85 [mcc_2001], 15-11-04 19:34Not exactly...我地係end user, 係要"瀉鑊"個party,一定要知,我地好多supplier都知,佢地判俾二判三判都知,大家都知點玩,政府都知,齊齊有個落台階,大家好做。
大家可能行業不同,所以有不同既理解吧。
最後修改時間: 2015-11-04 19:52:01 - #84 [schmike], 15-11-04 19:21#82
所以正常做生產或開發既電子工程師唔會知呢d
做材料及做認証既人先識
亦都好少人會去咁深入了解
應用層面同物料層面不同
好多謝兩位師兄講解咁多 - #83 [羅密歐], 15-11-04 19:03#80 請教elo師兄,銲錫含2% 3% 4%銀,都是含鉛的錫線嗎?它們的熔點分別是多少?加幾%銀進去,具體目的是甚麼呢?謝謝!
最後修改時間: 2015-11-04 19:05:03 - #82 [elo], 15-11-04 16:56If using a branded solder, the solder manufacturer already did all the necessary tests under J-STD-001 or 004. That's why the user will not do the tests themselves. Also the user will not invest on the testing equipment which will not improve their productivity.
I think there is no responsible manufacturer, no matter it is US, Germany or Japan, will use a solder which does not pass the tests under J-STD, DIN of JIS standard.
最後修改時間: 2015-11-04 17:00:11 - #81 [schmike], 15-11-04 16:28其實大部份廠(軍工及汽車除外)
都係買牌子貨
唔會好似你地咁check
我以前公司係日本上巿既廠都無咁做
只係用光普儀測有無鉻呀果一d rhos唔可以有既物料
Consumer既野好少好似你地咁
無鉛產品多,你叫佢地用有鉛仲難 - #80 [elo], 15-11-04 16:24I did proivded different Ag content solder wire to a DIYer to make Interconnect cable. He prefered Silver contect 4% > 3% > 2%. Of course it is only his preference. Another DIY perfers Lead wire, the more Lead the better according to his experience.
So there is no absolute "Good sound" solder. My 2 cents. - #79 [mcc_2001], 15-11-04 16:13人總是有"理性"同"感性"兩個行為的, 當身處工作需要, 理性既"瀉鑊"模式會自動啓動, 當想音質要更上一層樓既話, 加少少野, 賣個天價, 感性的聽覺會話俾自己聽好值得, 自然會樂在其中的!!
最後修改時間: 2015-11-04 16:22:03 - #78 [elo], 15-11-04 14:43#77 Agree.
- #77 [254mm], 15-11-04 14:42哈,a good question, solder professionals focus on durability and safety, can't expect* may be too harsh* them to care on sound performance. 針冇两頭利!
- #76 [羅密歐], 15-11-04 14:39#75 試問又有誰做過科學性測試呢?還有,你認為這麼多不同的品牌,都有自家的焊錫科硏專利/特別工藝調配嗎?都有自家的焊錫工廠嗎?還不是靠OEM工廠生產,自家品牌的一張貼紙,還有廣告....
- #75 [davelm], 15-11-04 14:27咁!WBT是否又貴又唔好聲
- #74 [elo], 15-11-04 14:26>含咩佢唔會點理(日本仔除外,講明含銀)<
You know why Japanese companys request to use Silver content solder ? It may because it is a Japanese company (Senju) invented Silver content Lead-free solder, every manufacturer needs to pay royalty fee to them when making this kind of solder alloy. Japanese helping Japanese is understandable. Anyway the patent is expired and no more royalty need to pay. - #73 [elo], 15-11-04 14:18#27
請問咩工業咁勁?
軍工嗎
我前兩年做過紅M電鑽
歐洲廠既測量儀器講明要無鉛架wo
含咩佢唔會點理(日本仔除外,講明含銀)
可以我果d儀器做俾canxx nikxx用太民用
無你講既特殊要求
Consumer products doesn't mind using Lead-free solder as you probably will buy a new one before it, such as Digital Camera, breakdown itself.
As you mentioned, Military also Avaiation, Automotive, Medical products... are reluctant to change to use Lead-free solder due to these is no solid record for its realiability. - 下一頁 (3 of 7)
- 返回 ...