- #62 [cashotline], 19-08-27 16:39
- #63 [BigS], 19-08-27 21:42UpTone ISOREGEN現在使用中..USB必用
最後修改時間: 2019-08-27 21:56:19 - #64 [patkwok], 19-09-27 11:51
-
- #65 [Cnn], 19-09-27 13:18多謝提示.
- #66 [mikechw], 19-10-09 12:51Just bought it last week.
The unit is quite hot after powered up.. - #67 [patkwok], 19-10-09 14:06你部PRO版喎
- #68 [mikechw], 19-10-09 14:16有Analog in...
Dac function should be the same - #69 [patkwok], 19-10-10 12:11#68
update最新firmware - #70 [drops.penny], 19-10-11 15:11如果剩係聽數碼,請問可唔可以當前級用呢?
- #71 [kayue], 19-10-11 16:05可以呀,RME 是非常之好的前級
- #72 [mikechw], 19-10-11 16:26Yes ADI-PRO fs can used as a preamp..
Analog in .. -> Sampling rate 192khz 24bit.
XLR input only..
Input: XLR, servo-balanced Input sensitivity switchable +24 dBu, +19 dBu, +13 dBu, +4 dBu @ 0 dBFS
For normal XLR balanced output, I use +13dBu... - #73 [Karas], 19-10-12 13:00已有passive preamp 係咪可以set disable volume control? 同埋好似有NOS setting? 分別大嗎?
想問部機數碼味勁唔勁? 想要音樂感 音場 伸延感強的..... - #74 [kayue], 19-10-12 13:07將音量 set 去 -0 dbu 即係 bypass volume
- #75 [mikechw], 19-10-14 10:49You can lock the volume output to 0.0 dB
My setting at +13dBu == 3.46 Vrms
If you need 2Vrms output set to to around -5.0dB with +13dBu - #76 [patkwok], 19-10-14 11:08我發覺如果set vol to 0db,會頂爆sound level, 要係i/o menu set 個auto db 做+1db先得
正常嗎?
我用ADI-2 DAC FS - #77 [mikechw], 19-10-14 11:10There are 5 filter settings.
SD Sharp
Sharp
SD Slow
Slow
and
Super Slow (NOS)
Basically you won't hear the difference if you are using 192khz or above.
最後修改時間: 2019-10-14 11:11:37 - #78 [mikechw], 19-10-14 11:12Super Slow (NOS)
- #79 [mikechw], 19-10-14 14:41For RCA output (ADI-2 DAC)
-5dbu ---> 0.436 Vrms
+1dbu ---> 0.869 Vrms
+7dbu ---> 1.734 Vrms
XLR output is 6dB higher.. - #80 [williamm], 19-10-19 01:20今天剛買了DAC
聽古典好好聽 - #81 [patkwok], 19-11-15 11:58出左個小改款
個remote唔同左樣
DAC chip upgrade to AK4493 from AK4490
最後修改時間: 2019-11-15 11:59:02 - 下一頁 (4 of 14)
- 返回 ...
專業機點解唔直接使用ASIO driver