- #245 [Fuzzyboy18], 20-10-22 12:54有無師兄用RME 夾Roon, 有無問題?
- #244 [Forfun], 20-08-19 12:15#242
唔好升頻,升頻啲聲唔靚,我試過幾個 DAC 都係咁。 - #243 [patkwok], 20-08-19 11:47#242
呢部DAC無升頻
要玩升頻可考慮Chord HUGO M SCALER
或者Roon
最後修改時間: 2020-08-19 11:50:13 -
- #242 [Kenngy19741111], 20-08-19 11:28請問此dac是否可由同軸/usb輸入44.1k 升頻至768k經平衡xlr輸出?謝謝
- #241 [awwk4you], 20-07-25 20:54請問大家覺得用USB ( 用raspberry/iodata) DAC 前 用 DDC 會有改善嗎?。
- #240 [gchan2001], 20-06-20 09:32
- #239 [nippon], 20-06-15 19:29Room correction 想問各位可以教導一下小弟點用嗎?Thx!
- #238 [gchan2001], 20-05-26 09:40
- #237 [teruhata], 20-05-25 23:40有冇師兄將ADI-2 DAC原裝SMPS 轉咗做LPS? 如果有嘅想知道效果如何?
- #236 [teruhata], 20-05-15 13:04229 ching, regards to your two way cables, AES to the adaptor and then from adaptor to Coaxial, just wonder how do you justify the SQ is base on which cable? Sorry I’m not familiar with this kind of setup, therefore I would like to find out more on whether I should get the same brand of the cable.
- #235 [nippon], 20-05-15 12:20#233 THX C-HING
- #234 [gchan2001], 20-05-14 07:18DSD option set to OFF.
- #233 [gchan2001], 20-05-14 07:17Please refer to the manual.
- #232 [nippon], 20-05-14 01:16#231, how to set? thx
- #231 [kayue], 20-05-13 23:50唔好用 DSD Direct
DSD 格式上不支援 DSP,要調音量一定要轉 PCM 先。 - #230 [nippon], 20-05-13 23:44請問怎麼setup’想將dac. 當前級,但當輸入dsd file時就不能改變聲音大小、應該怎處理,
- #229 [lmceric84], 20-05-11 18:07The wyde eye is a coaxial cables(75ohm) and the gotham gac-2 was changed to Neutril female xlr for the connection of mu-20 and rca to rme. I heard the sound is more dynamic than wyde coaxial.
- #228 [teruhata], 20-05-11 17:12227 Just curious for the cable to the cd transport...are you also using the Neutrik adaptor in between aes Gotham and coaxial Wyde eye to connect them together? I am thinking to get a diy two separate Sommer cables (one aes and one coaxial) and added the adaptor.
By the way, as I am still new to Adi-2, what’s the best method to adjust the volume of dBu and dBr to match with the 2ch amp. I’m connecting using XLR, so I didn’t adjust it to the max of +13dBu but +7dBu and -8.0dBr
As some ppl suggested to set auto ref to 0dBr and use +1.0dBu instead if the volume control is mainly from the 2ch amp. - #227 [lmceric84], 20-05-11 16:36226 welcome, the music note cd transport + rme adi-2 with aes connection is really impressed me. The total cost is less than $10k but its performance is better than my previous Musical Fidelity kw dm25 combo($15k up in 2nd hand mkt) in all aspect. Highly recommend in this price range cd player
- #226 [teruhata], 20-05-11 13:11225 Thanks for detail explanations, I have also thought of due to the differences on the ohm between coaxial and AES how can it possible to link them up; so the length of the cable does matter on this kind of setup. I did a search on this topic and found the following. It’s exactly like you said.1
https://www.soundonsound.com/sound-advice/q-can-connect-aes-output-spdif-input
Sounds like adding a converter in between the two cables might be a better choice and the most proper way to do it I would say. This is because I have also ordered the cd transport that you had introduced on the other topic :), as the CP value is so high plus many of you had said it even beat using the OPPO as a cd transport. Might just give it a try to see how it perform with the adi-2 together. - 下一頁 (2 of 14)
- 返回 ...