- #3024 [tklau2000], 21-10-13 21:48
- #3023 [hahayanyan], 21-09-06 11:33do not assume thsoe service provider can have " code " now, in the past yes, now may not..
give them a call
but 轉freq..ok... why not just keep that at 120V..etc.. haha
最後修改時間: 2021-09-06 11:33:41 - #3022 [嘩哈哈], 21-09-06 11:22其實仲有一個辦法, 搵converter升壓再轉freq, 市面上亦有呢類產品, 不過暫時都係想直改120v/60hz
-
- #3021 [hahayanyan], 21-09-05 10:48有code so nice
- #3020 [cj8437], 21-09-05 10:41我部320前級美國回來要入code, 都是在火炭樂X攪掂。
- #3019 [yukclee], 21-09-05 07:55以我所知,是有師傅可以改code去搞掂的。我以前部30.6從美國買回時已曾經有這問題,也是在香港搞掂。
- #3018 [hahayanyan], 21-09-04 13:11Haha if u have not brought that.. Then better not buying it.. Haha
As even harman group seem no longer have parts pcb level parts for fixing those generation of pre amp...
And 有咩唔妥搵人整整部機一開機冇個code乜嘢都冇得用...
真的是好東西... 動態唔錯 寧靜很寧靜... 很誠實的一部前級 haha good pre amp
最後修改時間: 2021-09-04 13:14:53 - #3017 [嘩哈哈], 21-09-04 11:51廠方回覆必定要到當地認可service centre先可以解鎖, 唔會比code, 就算搵香港service centre都唔得, 企得好硬
- #3016 [hahayanyan], 21-09-02 11:50以往佢哋就未必畀嘅
但而家佢哋都唔再擁有呢個牌子或者不在乎會畀你
They have a formula to calculate the code based on your serial no.
Good luck for those generation of mark device , quite good preamp, responds quite well for any change of component.. Quite transparent too
最後修改時間: 2021-09-02 11:52:50 - #3015 [嘩哈哈], 21-09-02 11:26明白, 試試聯絡廠先, thx
- #3014 [hahayanyan], 21-09-02 09:51the code is serial no. specific , so each code for each unit is different
good luck, may be and only Herman group can give u the code ,u need to tell them the serial no.
or enjoy your 326s with some of those PS audio things, which can set at 60hz
最後修改時間: 2021-09-02 09:52:10 - #3013 [嘩哈哈], 21-09-02 09:36唔知個code會唔會一樣既呢?
- #3012 [hahayanyan], 21-09-02 00:07My no 32 need a password for unlock it to work at 50hz
I assume the 326 is the same - #3011 [嘩哈哈], 21-09-01 23:38請教各位大大, 326s前級由220v/50Hz轉120v/60Hz除左開殼插jumper外, 是否需要入pass code先開到機?
- #3010 [Krell], 21-08-31 08:48taztoto兄:
真係非常感謝你嘅幫忙! - #3009 [taztoto], 21-08-18 21:53
- #3008 [Krell], 21-07-25 21:11各位好:
請問有無師兄手上有ML20, 20.5 或 20.6嘅service manual或線路圖可供參考?20.6嘅最啱用。
如果有師兄全機recap過而留有有關資料,例如原本那支電容係乜廠乜數值,改了用乜廠乜數值,可否分享一下?
當然如有那些零件(某電阻及某晶體管)容易燒毀而有應對方案,也希不吝賜教。
謝謝! - #3007 [hkbmbby], 21-07-01 12:26想試吓Mark Levinson 27.5 power amp, 各位可以賜教嗎
- #3006 [samanleung], 21-03-17 13:21請問有冇師兄知道怎會樣可以增加 380S 前級嘅 line gain? 因為現在音量開到六十幾才可去到正常音壓,我是用老麥mc452, 謝謝!
- #3005 [Bobby], 21-02-28 14:25有事請教,我部332開機後,發覺左聲道有少許沙沙聲,六七分鐘後,左頂蓋及散熱片非常熱.,熱到燙手,想問下有冇師兄知原因,是否如各師兄所言,Mark仔通病,電容老化漏液,如維修換電容,費用大概多少?
- 下一頁 (2 of 153)
- 返回 ...
最後修改時間: 2021-10-13 21:49:36