You may go to any electrical appliances store for buying sturdy BS 1363 13A plug with 13A fuse in H.K., Kln and N.T. would then be okay.

Any stores in HK where I can have it done, and how much it costs?

Below photo show the termination of US and U.K. Plug for your reference, suggest you buy correct plug if you don't have any knowledge on re-termination the cable.

Hope u get it directly from Zu

Furutech BS plug spec

•Specifications: Accommodates cable diameters of 6.0mm to 20.0mm
•Dimensions: Body 50.4mm (W) x 50.2mm (L) x 55.8mm (H)
•Rated: 13A Fused/250V

No, this is not from China. It is from the US directly from the real company.

Fake Cardas

https://www.google.com.hk/search?client=safari&hl=en-hk&ei=a1cYWamHE8T48gWKsZagCA&q=fake+cardas+cables&oq=fake+cardas&gs_l=mobile-gws-serp.1.0.0i22i30k1l4.50447.55026.0.56578.20.20.0.3.3.0.176.1740.16j4.20.0....0...1.1.64.mobile-gws-serp..1.19.1363...0j41j0i67k1.fdwkrnyKKkQ

For example

https://www.google.com.hk/search?q=fake+audioquest+sky&ie=UTF-8&oe=UTF-8&hl=en-hk&client=safari

If u buy from China, usually fake.

I want to buy this power cable and change it with the Furutech UK plug - is it possible to terminate it this way?

The reason is because this is a reference level powercord that normally costs 600usd.

Example of universal voltage equipment , safe to use any voltage , 100 - 240v



最後修改時間: 2017-05-14 18:39:41

Picture

＞＞＞Will there be no problems of using a cable that is made in the US market, and to change the US plug to a UK plug?

Only if properly rated. See picture below

最後修改時間: 2017-05-14 18:05:14

Some equipment require internal jumper reconnect or transformser input wire resoldering

最後修改時間: 2017-05-14 17:48:08

Another example

For example

＞＞＞No issues of blowing up my equipment or having an incorrect voltage power?

Need to set your equipment to 220/230v

Furutech, large hole to insert wire

This one is not easy, especially thick hi end cable

I have that Furutech mains plug on my Amp power plug.

So you are saying it is not easy, but it is easier or possible with that exact Furutech power plug?

Will there be no problems of using a cable that is made in the US market, and to change the US plug to a UK plug?

No issues of blowing up my equipment or having an incorrect voltage power?