- #1 [我是一個人], 18-01-18 15:14請問鴨記會唔會有機會有得賣?thx
- #2 [BB1668], 18-01-18 15:16有
- #3 [我是一個人], 18-01-18 15:21謝
-
- #4 [jason6], 18-01-18 17:38我試過,「接口」才是一個大問題。
因為冇適合接口,結果要掉咗個室內無線電話。
之後,一定揀係用3A, 2A電的機。 - #5 [BB1668], 18-01-18 17:42記得帶埋原裝電池去配
- #6 [jason6], 18-01-18 17:56穩陣就帶埋嗰隻電話去
>>記得帶埋原裝電池去配 - #7 [dttmtong], 18-01-18 18:064,
拆左舊接口參落新電得唔得? - #8 [phil.ng], 18-01-18 18:11自己買靚電DIY more durable than 原廠
我個飛記電shaver, 用靚電丶行佐十年丶要自己焊!
最後修改時間: 2018-01-18 18:14:36 - #9 [gary3886wong], 18-01-18 18:28早前我都搵過,鴨記有焊片的AAA電是大陸
- #10 [我是一個人], 18-01-18 22:26Thanks all ^^
- #11 [呀金], 18-01-18 22:28拆左舊接口參落新電得唔得?
--------------
得
唔好倒轉正負就可以 - #12 [alexanderkoo], 18-01-19 12:35I thought I was the last person to terminate the fixed line since mobile is so popular.(of course, there might be genuine need for fax or intercom for large house) If so, why bother fixing the phone.
- #13 [我是一個人], 18-01-19 13:21Alex sir, for office
- #14 [Phil.ng], 18-01-19 13:45>>>鴨記有焊片的AAA電是大陸
靚電,用沙紙,松香,可自己焊 - #15 [呀金], 18-01-19 14:01靚電,用沙紙,松香,可自己焊
..............
要大功率辣雞,同埋好手勢,減低過熱傷電。 - #16 [cornercube], 18-01-19 14:03&
用低溫錫線. - #17 [Phil.ng], 18-01-19 14:24用個舊電試佐先
用火酒clean contacts
我自己做過.放膽造 - #18 [smash], 18-01-19 18:17Buy Sanyo battery then DIY. Cut the existing connector and reuse. Easy.
For NiMh battery, make sure it is fully discharge before recharge. Your battery will last very long period. Do not keep placing the phone on the charging stand all the time.
If you don't know how to do the soldering, then you have no choice to buy the existing battery pack in 鴨記. - #19 [phil.ng], 18-01-19 21:17買P記無記憶丶AAA、可义千八次
- #20 [phil.ng], 18-01-19 21:22、
- 下一頁 (1 of 2)
- 返回 ...